2014 Ford Taurus Limited on 2040-cars

Auto blog

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.

NHTSA and Ford investigating steering issues in Crown Vic, Grand Marquis and Marauder

There may be more steering woes for the Ford Crown Victoria. The National Highway Traffic Safety Administration has opened a preliminary evaluation into the Crown Vic and Mercury Grand Marquis from the 2004 to 2007 model years and the Mercury Marauder for the 2004 and 2005 model years because the steering shaft can jam. The issue could potentially affect an estimated 500,000 vehicles.
According to the regulator, there is a possibility that the driver's side heat shield for the exhaust manifold can rust, dislodge, and then wedge into the steering shaft. If this occurs, it leads to a situation where the driver can no longer control the car.
NHTSA has received five complaints of this happening, including one alleged case with an injury. In that situation, the car was driving onto the highway, lost control and rolled over. One occupant was hurt in the accident.

Ford cuts 950 Russian jobs on weak demand

The Russian auto market, in decline for the past year and further hit by the declining value of the ruble and recent sanctions over its annexation of Crimea, has forced Ford to cut jobs and shifts at two of its joint venture plants there. Around 700 of the 2,700 total workers who build the Russian-market Focus and Mondeo will be cut at the plant in Vsevolozhsk, near St. Petersburg as it drops to a single production shift. A second plant about 700 miles away in Yelabuga, in the Tartarstan region, will lose 250 workers. That plant builds seven vehicles, including the Explorer, Kuga and Edge.
The Moscow Times says Ford has been especially hit by the market decline, the overall market losing 5.5 percent in 2013 compared to the year before, but Ford sales dropping 18 percent in 2013 year-on-year. This year isn't going any better, with The Blue Oval posting a 21-percent decline through the first two months of 2014. That's why, though the Yelabuga plant builds the CUVs that customers are moving into, even it is facing cuts.
The job cuts in Vsevolozhsk come on top four-week plant shutdown planned so that the paint and body shops can go to one shift. In a statement, the company said, "Ford Sollers remains absolutely committed to the Russian market and is confident it has the right product plan, people and assets to deliver long-term profitable growth."