2003 Ford Ranger Edge Standard Cab Pickup 2-door 3.0l on 2040-cars
Buffalo, New York, United States
This vehicle was purchased in March 2012 as a salvage vehicle on EBay via auction from St. Louis, MO with 93,000 miles. The left side of the pickup bed was replaced. The vehicle was then inspected by NYS and went through the NYS Salvage and Rebuilt Title and Safety Inspection. The vehicle now has a rebuilt salvage title. I have driven the vehicle for approximately 25,000 miles with no problems whatsoever. The vehicle has a fresh oil change and new brakes! Low Reserve! |
Ford Ranger for Sale
- 2002 ford ranger xlt extended cab pickup 4-door 2.3l(US $8,500.00)
- Ford ranger 2dr 4x4 pickup truck w/cap(US $995.00)
- 2wd 4dr supercab 126" xlt ford ranger xlt automatic gasoline v6 cyl engine oxfor
- 1991 ford ranger xlt standard cab pickup 2-door 4.0l v6(US $1,500.00)
- 1 owner clean carfax(US $11,995.00)
- 2001 ford ranger - no reserve
Auto Services in New York
Wheeler`s Collision Service ★★★★★
Vogel`s Collision Svc ★★★★★
Village Automotive Center ★★★★★
Vail Automotive Inc ★★★★★
Turbine Tech Torque Converters ★★★★★
Top Line Auto Glass ★★★★★
Auto blog
Ford will build Hackmobile out of Transit Connect Wagon
Fri, 27 Dec 2013What you see in the above image is a rendering of the Hackmobile Transit Connect Wagon. What is that? It's a "mobile fabrication and hacking unit" that includes tools for metal- and woodworking, 3D and electronics fabrication, a three-axis CNC machine called "The Fabber," a video projector and screen, an air compressor, an 84x48-inch work surface that folds out like a Murphy bed and oh so much more. When not in use, all of the implements fold neatly into the back of Ford's award-winning van.
But perhaps the more important question is why is that? Because Make Magazine held an Ultimate Maker Vehicle Challenge in conjunction with Ford in which ten teams created were charged with creating "the ultimate Ford Transit Connect Wagon for the do-it-yourself enthusiast." Team Twin Cities Maker won the competition with the Hackmobile, and in addition to winning $10,000, Ford has declared it's actually going to build the thing - which is great, because if they can actually engineer a road-legal Hackmobile Transit Connect Wagon as envisioned, the inevitable A-Team movie reboot might need to think about including it.
Check out the video below for a cheeky walk-through of the Hackmobile, and get all the particulars in the press release below that.
NHTSA and Ford investigating steering issues in Crown Vic, Grand Marquis and Marauder
Fri, 11 Jul 2014There may be more steering woes for the Ford Crown Victoria. The National Highway Traffic Safety Administration has opened a preliminary evaluation into the Crown Vic and Mercury Grand Marquis from the 2004 to 2007 model years and the Mercury Marauder for the 2004 and 2005 model years because the steering shaft can jam. The issue could potentially affect an estimated 500,000 vehicles.
According to the regulator, there is a possibility that the driver's side heat shield for the exhaust manifold can rust, dislodge, and then wedge into the steering shaft. If this occurs, it leads to a situation where the driver can no longer control the car.
NHTSA has received five complaints of this happening, including one alleged case with an injury. In that situation, the car was driving onto the highway, lost control and rolled over. One occupant was hurt in the accident.
Mustang parts under the new Lincoln Aviator mean good things for Ford
Wed, Mar 28 2018NEW YORK — As we mentioned last night, underneath the new Lincoln Aviator "concept" there appears to be an independent rear suspension lifted right from the Ford Mustang parts bin. And while it's pretty cool on its face that Mustang rear-drive platform bits are being reused in the broader Ford universe, what this means for the next Explorer could be really cool. A quick caveat: The Aviator here in New York is very close to the production version, but it's not technically a production car. It looks hand-built, with temporary exhaust and some show-car touches. The suspension underneath looks exactly like a Mustang's, but the actual production Aviator will almost certainly use beefier components with the same basic design and geometry, since the Aviator will be much heavier than the smaller Mustang. That being said, we're fairly confident that even at this early stage, the Mustang-derived suspension seen in New York is a preview of what'll be under the production Aviator. Furthermore, Ford won't say it, but based on what we're seeing on Aviator, it's a safe bet that Ford will utilize the Aviator platform for the next Explorer. That would enable the economies of scale necessary to produce a brand new rear-drive-based SUV platform in the first place. It also means that the Explorer should be available without AWD — and given the stable of powerful EcoBoost engines, and the competent 10-speed automatic in the parts bin, a rear-drive Explorer has a shot at being a decent driver. Aviator wouldn't go rear-drive-based if driving dynamics weren't important; Explorer should inherit these priorities. More evidence: The Explorer spy shots we saw back in February sure share the Aviator's general proportions. Even back then, before Aviator was revealed, we were hypothesizing that an EcoBoost 3.5-liter-powered version could boast as much as 400 horsepower, if the Expedition's tune were adopted. Suddenly, the Explorer seems very interesting. So, an EcoBoost, rear-drive Explorer sure sounds like something Ford Performance would be interested in, right? We knew an Explorer ST is coming, but with 365-400 horsepower potential and a chassis designed with dynamics in mind, it doesn't seem like as much of a stretch as the Edge ST. And a performance-oriented AWD system is a possibility, too. That's an area where Ford has been gathering experience at a rapid pace. What do we not expect from a new Explorer? A V8.