1998 Ford Ranger Xlt Standard Cab Pickup 2-door 2.5l on 2040-cars

Auto blog

Hennessey completes first VelociRaptor SUV conversion [w/video]

Start with a Ford F-150 SVT Raptor as your base vehicle for modification, and chances are high that you'll end up with something pretty cool. Now, have those modifications done by professional lunatics Hennessey Performance, make the project turning the pickup into an ultra-long SUV, and the result stands a real chance of being a total kick in the ass. Let us present the Hennessey VelociRaptor then, in all of its awesomeness.
Hennessey has taken care in grafting a "Expedition style" rear cabin onto the Raptor, complete with an optional third row. The pictures we have show a cabin that's up to the fit and finish standards of the original Ford truck, too. The cab added over the bed also makes room for a massive load space out back, accessible via split out-folding doors and long enough for a person to lay down in (see video).
Mechanically, the truck-turned-SUV sticks with Ford's stock 6.2-liter V8, rated at 411 horsepower, or can be had with a supercharger and some 600 hp. Hennessey says the stock-motor VelociRaptor will run from 0-60 miles per hour in 7.5 seconds, while the hi-po version takes just 5.9 seconds. The SUV does take some of the off-road ability away from the Raptor, with the company saying it hasn't yet had the opportunity to test its capabilities. On-roading and "moderate off-road duties" are the current prescription.

Recharge Wrap-up: Ford 1.0L EcoBoost a hit in Europe; Build a tiny inverter, win $1 million

In Europe, Ford's 1.0-liter EcoBoost engine is the best-selling turbocharged gasoline engine. The three-cylinder motor powers 20 percent of new Fords sold in Europe. Earlier this year, it won its third International Engine of the Year award, and between January and June, it was sold in about 120,000 cars. So far this year, 38 percent of Fords sold in the Netherlands, 35 percent in Denmark and 32 percent in Switzerland have been powered by the 1.0-liter EcoBoost. The engine's turbocharger spins at 248,000 rpm, and provides 24 psi of pressure. The engine produces up to 138 horsepower, depending on the version. Read more in the press release below. When lithium-ion battery packs are retired from the road, remanufacturing, repurposing, and recycling are worthwhile options, according to a study by Mineta Transportation Institute. The study included a cost-benefit analysis of those three options, and found remanufacturing to be the best route. To get the most out of them, batteries should be tested and have their damaged cells replaced then put back to use. Repurposing is the second best option, using the remaining available charge for something besides cars. Recycling on its own isn't profitable, but it could make economic sense with "increased technological breakthroughs." Learn more at Recycling International or download the report here. A smaller inverter for EVs can win you $1 million. The Little Box Challenge is an open competition to build a power inverter with a density of at least 50 watts per cubic inch. Google and the Institute of Electrical and Electronics Engineers (IEEE) are offering the hefty prize to the team that builds the inverter with the highest power density within an enclosed volume of 40 cubic inches. Teams must register by September 30. Read more at Green Car Congress or learn more at the Little Box Challenge website.

Automakers' rush on aluminum may result in shortage

Aluminum is the new buzzword in the automotive industry. The latest Range Rover and Range Rover Sport both take advantage of the lightweight material to shave huge amounts of body fat (only it's called "aluminium" over there). Audi and Jaguar have been using the stuff for years in their A8 and XJ, respectively, and now, aluminum is going mainstream, arriving on the 2015 Ford F-150.
While we're excited to see aluminum make an impact outside the premium market, its widespread adoption apparently won't come without some problems, notably in terms of supply. "There isn't an automotive manufacturer that makes vehicles in North America that we're not talking to," Tom Boney, of Novelis, the largest global supplier of aluminum sheetmetal, told The Detroit News.
According to Boney, Ford's use of aluminum on such a large scale has forced auto manufacturers in "every boardroom" to reconsider their plans following the F-150's unveiling, for one simple reason: there's not exactly enough aluminum to go around, at least in the short term. The auto industry presently only accounts for six percent of the aluminum sheet produced, but as the material is adopted by more and more brands, that figure is expected to swell to 25 percent within the next six years.