1952 Ford F1 Pickup Truck Flathead V8 Complete Restoration Hot Rod F100 Nr on 2040-cars
Saint Augustine, Florida, United States
Body Type:Pickup Truck
Engine:flathead v8
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Interior Color: Black
Make: Ford
Number of Cylinders: 8
Model: Other Pickups
Trim: short bed
Drive Type: rear
Mileage: 750
Exterior Color: Gray
Warranty: Vehicle does NOT have an existing warranty
This is a really nice 1952 Ford F1 pickup. Complete frame off restoration, media blasted, epoxy primed, minimal rust repair was done, and paint and body. All fenders on the truck are original steel. The truck has the original flathead motor it came with completely rebuilt, and perfect. You cant even hear it running. the trans is original as well and is a 3 speed that was gone through with new clutch and throwout bearing and is in perfect working order. Everythying listed below has been done to the truck and truck only has under 800 miles since built earlier this year (2013). Please look at the questions carefully and ask any question as they are part of the description.
New Southern Rods Mustang II front suspension. (tubular control arms and drilled and slotted rotors.
New corvette master cylinder with disc drum proportioning valve. (all new hard lines, hoses, brakes , and wheel cylinders.
New bias ply whitewalls
New true dual custom exhaust with stainless Ford paw exhaust tips
New electric fan
New Caddy tailights
New steel running boards
New complete bed with oak wood and tailgate.
New tempered one piece windows and new safety front and rear windshields
New New Vintage electronic gauges with electrtonic speedo with trip meter
New tilt steering column and billet leather half wrap banjo style steering wheel with polished horn button and adapter.
New period correrct upholstry on the original bench with new upper seat back foam.
New rubber floor mat
New window rubbers, scrapers, and channels
New door rubbers and seals
New hardyboard interior, headliner, kick panels, etc.
New wiring
New Headlights and complete marker light assemblies
The truck gets ridiculous attention. It is a very cool color you wont see on another. The truck is in perfect running order. Like stated it has under 800 miles on it, so it has been broken in and had all bolts and suspension re tightened, heads re torqued, and oil changed. Please ask any questions you might have. This is a NO RESERVE auction so bid it to win it. Please note I will not release truck until all funds have cleared entirely and there is cash in my hand. I can definitly make myself availiable to work with your shipper when the time comes.
Thanks
Ford Other Pickups for Sale
- Spectacular 1936 ford "resto-rod" flathead v8 pickup, nicest one on the planet
- Ford 2008 f-450 super duty 2wd 6.4l diesel crew cab xlt low miles one owner
- 1947 ford 4x4 1/2 ton pickup
- (C $14,500.00)
- 1999 ford f-550 7.3 power stroke 4x4 crew cab xlt 50k original miles $21,500.00(US $21,500.00)
- 1933 ford pick up - original hot rod - barn find flathead
Auto Services in Florida
Zacco`s Import car services ★★★★★
Y & F Auto Repair Specialists ★★★★★
Xtreme Auto Upholstery ★★★★★
X-Treme Auto Collision Inc ★★★★★
Velocity Window Tinting ★★★★★
Value Tire & Alignment ★★★★★
Auto blog
Ford recalls over 953,000 vehicles to replace Takata airbag inflators
Fri, Jan 4 2019DETROIT — Ford is recalling more than 953,000 vehicles worldwide to replace Takata passenger airbag inflators that can explode and hurl shrapnel. The move includes over 782,000 vehicles in the U.S. and is part of the largest series of recalls in U.S. history. Included are the 2010 Ford Edge and Lincoln MKX, the 2010 and 2011 Ford Ranger, the 2010 to 2012 Ford Fusion and Lincoln MKZ, the 2010 and 2011 Mercury Milan, and the 2010 to 2014 Ford Mustang. Some of the recalls may be limited to specific geographic areas of the U.S. Takata used the chemical ammonium nitrate to create an explosion to inflate airbags. But it can deteriorate over time due to heat and humidity and explode with too much force, blowing apart a metal canister designed to contain the explosion. At least 23 people have been killed worldwide and hundreds injured by the inflators. Ford says it doesn't know of any injuries in vehicles included in this recall. Dealers will replace the inflators. Ford will notify owners about the recall starting on Feb. 18, and the company has replacement parts available for dealers to order, said spokeswoman Monique Brentley. In previous Takata recalls, parts availability had been an issue. Owners can go to this Ford website and key in their vehicle identification number to see if their cars and SUVs are being recalled. The same information will be available soon at the NHTSA recall website. More than three years after the U.S. National Highway Traffic Safety Administration took over management of recalls involving Takata inflators, one third of the recalled inflators still have not been replaced, according to an annual report from the government and a court-appointed monitor. The report says 16.7 million faulty inflators out of 50 million under recall have yet to be replaced. And 10 million more inflators are scheduled to be recalled this month, including the Ford vehicles. Safety advocates said the completion rate should be far higher given the danger associated with the inflators. The recalls forced Takata of Japan to seek bankruptcy protection and sell most of its assets to pay for the fixes. The inflators grow more dangerous as they get older because ammonium nitrate deteriorates due to high humidity and cycles from hot temperatures to cold. The most dangerous inflators are in areas of the South along the Gulf of Mexico that have high humidity. Related Video:
Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day
Thu, 13 Feb 2014Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.
Last 2014 Ford Shelby GT500 Convertible nets $500k for charity at Barrett-Jackson [w/video]
Tue, 13 Aug 2013The last 2014 Ford Shelby GT500 Convertible was sold on Saturday at a Barrett-Jackson auction in Reno, Nevada, for $500,000. Ford donated the Mustang to be auctioned for charity, and all of the money is going to the Brain Injury Association of America.
Parnelli Jones, winner of the 1963 Indianapolis 500, was there on behalf of the BIAA with his son Page, who suffered a brain injury in a sprint car crash in 1994. The bidding increased quickly, reaching $500k in no time, spreading a bit more hope to people who live with brain injuries.
The winning bidder will be able to choose the GT500's exterior, interior and stripe colors, and is scheduled to receive the car, signed by Parnelli Jones in appreciation for the donation, by the end of 2013. Watch the video below to see the auction-block action.