White/black & Cashere Leather,chrome 19's,heated Pwr Seats,3.73's,flowmasters!!! on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

How tariffs in China could cause a meltdown in the American South

While BMW is clearly a German company, the crossovers that are exceedingly important to it are actually made in Spartanburg, South Carolina. And more than that, the Spartanburg plant (physically located in the town of Greer) is where the corporate know-how and capability for those vehicles is concentrated. These are the vehicles – specifically, the BMW X3, X4, X5, X6, X7 – that drove record growth for the company in 2018, according to BMW. But whatÂ’s most notable about BMW Group Plant Spartanburg, given current events, is that according to the U.S. Department of Commerce it was the largest automotive exporter by value for the fifth year running in 2018. ThatÂ’s worth emphasizing: largest automotive exporter by value. Not GM. Not Ford. BMW. And where might one assume that more than a few of those X vehicles are shipped to? China. Some 360 miles southwest of Spartanburg is Mercedes-Benz U.S. International, Inc., in in Tuscaloosa County, Alabama. It started building vehicles in 1997. Since then, Daimler AG has invested in excess of $5.5 billion in the facility. It manufactures the crossover now known as the GLE, formerly the ML-Class. It also makes the GLE coupe and GLS. Daimler describes the Tuscaloosa facility as “the traditional home of SUV production” for those vehicles. When it reported its global 2018 sales, Daimler noted that on a global basis SUVs account “for more than a third of all Mercedes-Benz sales.” According to the Chinese finance ministry, on December 15th the Chinese government will impose a 25% tariff on automobiles (and a 5% tariff on auto parts) from the U.S. Certainly this is going to have a direct effect on the sales of vehicles that are manufactured in the U.S. and exported to China. BMW and Mercedes are going to take it on the chin for the vehicles that they make in plants that they invested in so heavily in the U.S. Which could potentially mean that people in places like Greer, South Carolina, and Vance, Alabama, are going to find themselves in the crosshairs of the combatants. Soo too could Lincoln, which produces vehicles in places like Louisville, Kentucky (Navigator), Chicago, Illinois (Aviator) and Flat Rock, Michigan (Continental). Although the Tesla Gigafactory 3 is rapidly nearing completion in Shanghai, it is worth noting that vehicles built in Fremont, California, are being sold in China in numbers that donÂ’t make Musk unhappy.

Jay Leno and Lee Iacocca reflect on 50 years of Ford Mustang

Lee Iacocca oversaw the birth of the Ford Mustang back in the 1960s, rocketing the new pony car nameplate into million-unit sales territory in its initial go-round and cementing its place in the history books. Thus, we were immediately drawn to this latest episode of Jay Leno's Garage, in which the funnyman hosts Iacocca for a look at the origins of Ford's most iconic sports car. The legendary auto exec is looking notably more frail than when we last saw him, but if we're being asked around as a video guest when we're 89 years old, we'll consider that evidence of a life well lived.
Serial No. 0001 is on hand for the occasion for Jay's romp through history, as is the historic Mustang 1 showcar from 1962. Of course, the all-new 2015 Ford Mustang GT (in prototype form) makes an appearance at the end of the episode with chief engineer Dave Pericak, as well. Get some, below.