Red Mustang 1 Owner Garaged Low Miles Sport Car Coupe V6 Auto Clear Title Financ on 2040-cars

Auto blog

Suppliers love Toyota and Honda: Why that matters to you

You might think that a survey of automotive suppliers and their relationship with OEMs is the automotive equivalent of nerd prom. In some ways that's what the North American Automotive OEM-Supplier Working Relations Index (WRI) is. The study, the 17th annual conducted by Planning Perspectives Inc., is based on input from 652 salespeople from 108 Tier One suppliers, or, PPI points out, 40 of the top 50 automotive suppliers in North America. Suppliers to General Motors, Ford, FCA, Toyota, Honda, and Nissan. But the results have consequences in terms of tens of millions of dollars for OEMs - and in the quality, technology, and cost of the next vehicle you buy. There are a couple of ways to look at the results of the WRI. One is, "So what else is new?" And the other is, "Damn! How did that happen?" The study looks at five relationship areas — OEM Supplier Relationship; OEM Communication; OEM Help; OEM Hindrance; Supplier Profit Opportunity — within six purchasing areas — Body-in-White; Chassis; Electrical/Electronics; Exterior; Interior; Powertrain. In the overall rankings, Toyota is on top for the 15 th time in 17 years, with a score of 328. Honda, the only company to best Toyota (in 2009 and 2010), comes in second, at 319. Those two companies, explains John Henke, president of PPI, have collaborative working arrangements with colleagues and suppliers alike built into the very fabric of their cultures. This, however, is not a situation where one can readily conclude it is about "Japanese companies," because the third company with headquarters on the island of Honshu, Nissan, came in dead last. This is the "How did that happen?" portion. The Nissan score of 203 puts it 125 points behind Toyota. There hasn't been a number that low since the then-Chrysler Corp. scored 187 in 2010, when the company was clawing its way out of the recession. Clearly, the suppliers don't feel particularly engaged by the buyers at Nissan. Henke explains that whether a company does well or not on the WRI is rather simple. All people do things based on what they're measured on. "If you're measured on taking 10% out of your annual buy, you immediately know how to do it. But if you're also measured on improving relations, suddenly there is a new dynamic as to what you can do to achieve both.

These horribly misguided front-drive design studies nearly became the Mustang

As we eagerly await the unveiling of the all-new sixth-generation Mustang, Ford has been giving us some great information over the past few months showing what has gone into shaping its venerable pony car. As many changes as the Mustang has gone through in its 50 years, though, it appears the fourth-gen model played a decisive and pivotal role in the car's future.
As is part of Mustang lore, the front-wheel drive Ford Probe was originally developed as a next-generation Mustang in the Eighties before cooler heads prevailed. The Blue Oval has just released a handful of images showing how bad things could have been - including a full-scale clay model of a front-wheel-drive Mustang (shown above). Fortunately, the FWD Mustang plan was scrapped and Ford went to work designing a rear-wheel-drive replacement for the Fox Body Mustang, with three design studies making it far enough to become full-scale models. These include the soft "Bruce Jenner" Mustang, the over-the-top "Rambo" Mustang and the middle-ground "Arnold Schwarzenegger" Mustang, which finally became the basis for the 1994 'Stang.
By early 1991, the design language of the fourth-generation Mustang had been worked out, and the rest, they say, is history. Scroll down for the fascinating press release telling the story of the fourth-gen Mustang, and be sure to check out the gallery of horribly misguided sketches and various design studies that were all on the table in the late 1980s.

Watch how a Ford Raptor rolls down the assembly line in Dearborn

Bloomberg TV reporter Matt Miller is the proud new owner of a pretty killer truck. How do we know? The reporter headed to Dearborn, MI to Ford's assembly plant, with a film crew in tow, to see exactly how his new F-150 SVT Raptor and its mother-loving 6.2-liter V8 engine, was screwed together.
The resulting video does an excellent job of summing up how an assemblage of parts and pieces is turned into a triple-black Raptor, thanks to the work of some 1,000 employees and about 20 hours of real time. Click through below to see how the truck is born, with a surprise cameo playing the part of delivery driver at the end.