Ford: Mustang Shelby Gt350 Coupe 2-door on 2040-cars

Auto blog

Ford 1.0L EcoBoost 3-Cylinder: Autoblog Technology of the Year award finalist

As the old saying goes, "There's no replacement for displacement." But these days, many automakers are launching powerful, downsized engines that offer similar or better power output than their predecessors, all while offering improvements in fuel economy and emissions. These days, we're seeing automakers replacing eight-cylinder engines with turbocharged sixes, and the naturally aspirated six-cylinder motors are being phased out in favor of potent turbo fours. But Ford has gone even smaller, offering a three-cylinder, turbocharged engine with one single liter of displacement.
Sure, three-cylinder engines aren't anything new - they've been offered around the globe for ages. But Ford's EcoBoost 1.0L powerplant is perhaps the best application the Autoblog team has tested. Gone are the triple-cylinder complaints of yore - this engine doesn't sound anemic or buzzy, and there's healthy power output on tap. In fact, compared to the 1.6-liter inline-four that Ford also offers in the Fiesta, the 1.0-liter is more powerful, while boasting an impressive 45 miles per gallon on the highway.
This engine has already received numerous accolades, including winning the International Engine of the Year award in 2012, 2013 and 2014. The 1.0L EcoBoost will be available in the refreshed 2015 Ford Focus here in the US.

Ford won't be releasing GT500 lap times for the 'Ring, or any other car

Trucks have towing capacity, EVs have driving range and performance cars have Nürburgring lap times. What do all three have in common? They should all be taken with a grain of salt. Currently, there is no sanctioned way to record lap times or verify production-spec cars - a lesson we recently learned with the 2015 Nissan GT-R Nismo - and until there is a way to do so (and there probably never will be), we'll never officially know the actual time it took for Ford to lap the 'Ring with its ultra-powerful Shelby GT500.
After posting a Ford-made video of a 2013 GT500 running around the 'Ring, the guys over at SVTPerformance.com (an enthusiasts forum not affiliated with Ford or SVT) wanted more answers. They got in touch with Ford's Global Performance Vehicle Chief Engineer Jamal Hameedi, who said until there is a way to verify the times and inspect the cars, Ford will not get involved with lap-time wars. In the email, Hameedi pointed out that the 'Ring is a useful tool in that it allows a wide spectrum of track conditions, but until there is a governed way to record times, there is no way to accurately compare cars head-to-head.
And as much as some may not like it, Hameedi speaks the truth. It really isn't possible to compare times from one car to another, unless those cars were lapping the same track at the same time with the same driver. Not that any of this means there won't be continuous wars by fans and manufacturers alike... in other words, feel free to voice your opinions in the Comments below.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.