2000 Ford Mustang Gt Coupe 2-door 4.6l Saleen Body Kit on 2040-cars
Frisco, Texas, United States
Body Type:Coupe
Vehicle Title:Clear
Engine:4.6L 281Cu. In. V8 GAS SOHC Naturally Aspirated
Fuel Type:GAS
For Sale By:Private Seller
Make: Ford
Model: Mustang
Warranty: Vehicle does NOT have an existing warranty
Trim: GT Coupe 2-Door
Options: Leather Seats
Drive Type: RWD
Safety Features: Anti-Lock Brakes, Driver Airbag, Passenger Airbag
Mileage: 123,237
Power Options: Air Conditioning, Cruise Control, Power Locks, Power Windows, Power Seats
Sub Model: GT
Exterior Color: Silver
Interior Color: Black Leather
Number of Doors: 2
Number of Cylinders: 8
I am selling a 2000 Ford Mustang GT with Saleen Body Kit and New Paint. I am the second owner of this car. I purchased it from a dealership, stock with 40,000 miles. The car currently has 123,000 miles on two engines. The current engine has less than 60,000. This GT has never been wrecked.This mustang has a lot of bolt-on upgrades; mass air intake, long tube headers, pulleys, new gears, ram clutch, performance intake and plenum, off road exhaust, lowering springs, performance chip, etc.
There are some very minor fixes I have not been able to make before having to sell this car. The hood needs a new bolt. Cheap! Plastic underneath windshield wiper needs to be replaced. Cheap! Radio bezel needs to be replaced. Cheap! Door Key hole needs to be replaced. Cheap! Spoiler needs wiring hooked up. Cheap! I have reduced the price of this car a lot to make up for work not completed.
This car runs great and sounds awesome. This car will get lots of attention on the road. I have never raced this car once, not even on the highway. I wanted this car to look and sound better than most other mustangs on the road. I would be keeping this car forever, if I could... BUYER MUST COME GET THE CAR!!!
Ford Mustang for Sale
- 1973 ford mustang convertible-302 engine-high quality paint job-very original
- 2012 ford boss 302 laguna seca #617 recaro seats 438 mi texas direct auto(US $51,980.00)
- Shelby gt500 coupe with navigation 2,000 miles best colors best options kona
- 1965 shelby gt350 289 v8 power brakes power steering !!show car!! low reserve!!
- 2010 ford mustang convertible auto leather spoiler 54k texas direct auto(US $17,780.00)
- 2007 ford mustang v6 5 spd cruise ctrl spoiler 18's 45k texas direct auto(US $12,780.00)
Auto Services in Texas
World Tech Automotive ★★★★★
Western Auto ★★★★★
Victor`s Auto Sales ★★★★★
Tune`s & Tint ★★★★★
Truman Motors ★★★★★
True Image Productions ★★★★★
Auto blog
Ford Gets The Aluminum F-150 Ready For Prime Time
Wed, Nov 12 2014Russell Barnett, a Ford dealer in Tennessee, is ready for aluminum. Ford is using the metal almost exclusively in body of the 2015 version of its best-selling F-150 pickup, which starts arriving at dealerships next month. Barnett is already answering customers' questions about the truck. And he's updated his repair shop not only for the F-150, but in anticipation that other Ford brands such as the Mustang will eventually make the switch from steel. But, just in case, he ordered some extra steel-bodied 2014 pickups. "There will be some people who won't want to change for a while," says Barnett, who says pickups make up around half of the annual sales at his dealership in rural Winchester. Ford is doubling down on aluminum, which is lighter - and more expensive - than steel but just as tough. The new truck is the company's response to customers' requests for a more fuel-efficient and nimbler pickup. Fordhopes the advantages outweigh customer doubts about the durability of aluminum or potential repair costs for the pricier metal. It's a big risk. So far this year, one out of every three vehicles Ford sold in the U.S. was an F-Series pickup. Morgan Stanley estimates F-Series trucks account for 90 percent of Ford's global automotive profit. On Tuesday, it kicked off production of the new truck at its Dearborn Truck Plant, four miles from the company's headquarters. "Yeah, this is a risk, but it's one well worth taking." said Bill Ford, the company's executive chairman, as he stood alongside the assembly line. "For our customer, this is a big, big leap forward." The trucks have been the best-selling vehicles in the U.S. for 32 straight years; last year, Ford sold nearly 100,000 more full-size pickups than General Motors. Aluminum isn't new to the auto industry, but this is the first time it will cover the entire body of such a high-volume vehicle. Ford made 647,697 F-150 pickups at its two U.S. plants last year; that's one every 49 seconds. If Ford's bet pays off, it could pad its lead in the lucrative truck market. More importantly, aluminum "future proofs" the truck - and the company - in an era of rising fuel economy standards, says Karl Brauer, a senior analyst with Kelley Blue Book. Ford will announce the truck's fuel economy figures later this month. That could determine if it steals customers away from the Silverado or Ram. Truck buyers are among the most loyal in the auto market.
Ward's reveals annual 10 Best Engines list for 2013
Thu, 13 Dec 2012Ward's Auto has released its annual 10 Best Engines award winners. The 2013 list covers the full width and breadth of the internal combustion spectrum, from a spate of efficient four-cylinders to the most powerful production V8 on the planet. As always, the entries must be available in a production vehicle in the first quarter of 2013 with an MSRP of less than $55,000. The supercharged 3.0-liter V6 from the Audi S5 held on for the fourth consecutive year, and BMW earned two spots on the list with its turbo 2.0-liter four-cylinder and turbo 3.0-liter inline-six.
Ford pulled in two awards for its 2.0-liter EcoBoost four-cylinder and and the supercharged 5.8-liter V8 from the Shelby GT500. Honda matched BMW and Ford with two wins of its own. Wards awarded the 2.4-liter four-cylinder from the Honda Accord Sport as well as the 3.5-liter V6 from the Honda Accord. Chrysler, General Motors and Subaru each garnered a spot on the list as well for the 3.6-liter V6 in the Ram 1500, the turbo 2.0-liter four-cylinder in the Cadillac ATS and the 2.0-liter four-cylinder the Subaru BRZ, respectively. You can read the full press release below for more information.
Junkyard Gem: 1971 Mercury Comet 2-Door Sedan
Sat, Sep 10 2022When Ford introduced the original Maverick for the 1970 model year, Dearborn tradition required that a Mercury-badged version be created. That car ended up being the Comet, built from the 1971 through 1977 model years. Here's one of those first-year Comets in rough but recognizable condition, found in a Denver self-service yard not long ago. The Comet name had spent the 1960s affixed to the flanks of Mercurized Ford Falcons (1960-1965) and Fairlanes (1966-1969). Since the Maverick was the successor of the Falcon — sales of which went into an irrecoverable downward spiral once its sportier Mustang first cousin hit the streets — it made sense to move the Comet name over to the Mercury version. Nearly every American Mercury model ever sold was a U.S.-market Ford model with a different name and some gingerbread slapped on. Notable exceptions to this tradition include the 1999-2002 Mercury Cougar (mechanically based on the Contour but with a unique body) and the 1991-1994 Mercury Capri (an Australian-built mashup of Mazda components borrowed from the Ford Laser). The Comet was by far the cheapest Mercury model available in 1971, though it was considered more prestigious than its Maverick counterpart. The price tag on the '71 Comet two-door sedan started at $2,217 (about $16,505 in 2022 dollars), while the '71 Maverick two-door sedan cost $2,175 ($16,193 today). Meanwhile, AMC would sell you a new Hornet two-door sedan for one dollar less than a Maverick, Chevrolet had the Nova coupe for a dollar more than the Maverick, and Plymouth offered the Valiant Duster for $2,313 ($17,220 now). Toyota had a Maverick competitor as well that year, with the Corona at $2,150 for the sedan and $2,310 for the coupe. Having driven every one of the aforementioned models, I'd take the Duster if I went back in time and had to choose one (as a 1969 Corona owner, I'm not a fan of the 1971 facelift, though the Corona's build quality beats the Duster's). The build sticker on this car tells us that it was built at the Kansas City Assembly Plant (where Transits and F-150s are made today) and sold through the Los Angeles district sales office (there was a DSO in Denver, so it's a near-certainty that this car didn't start out in Colorado). The paint started out as Bright Blue Metallic (it's neither bright nor metallic 51 years down the road) and the interior was done up in Medium Blue Cloth & Vinyl.