1970 Ford Mustang Convertible 351c 4speed All Original 1 Of 32 Motor/trans Combo on 2040-cars

Auto blog

John Hennessey's personal 2015 HPE700 Supercharged Ford Mustang GT hits 195 mph

Dressed in a coat of menacing black paint, the 2015 Hennessey Performance HPE700 Supercharged Ford Mustang GT definitely looks like one mean muscle machine. The 717-horsepower 'Stang proved that it can back up that aggressive appearance recently when company founder John Hennessey took his personal example to see just how fast it would go. The result down the 1.1-mile straight at the Continental Tires Proving Grounds in Uvalde, Texas, was over 195 miles per hour. The Mustang is nothing but a black blur and wall of supercharger wail as it buzzes by the camera at top speed. Despite the strong result, Hennessey doesn't seem done with the 'Stang yet. The car still seems to be pulling when it hits the rev limiter, and there's some straight track left ahead. After getting out, John Hennessey immediately says he thinks 200 mph is possible. The heart of the HPE700 is a 2.9-liter Roots-Type supercharger running at 7.25 psi. That's a pretty massive blower, especially when considering the 2.4-liter unit on the Hellcat V8. The engine also gets upgrades like improved injectors, a new fuel pump, stainless steel exhaust and recalibrated management. The company claims the upgraded Mustang can hit 60 in around 3.6 seconds and do the quarter-mile in 11.2 seconds at 131 mph. Prices for the package start at $59,500, but this one would would ring up for $65,874. Hennessey Performance is limiting production to 500 of them for the 2015 model year. 2015 HPE700 Supercharged Mustang Rockets to 195.2 mph John Hennessey takes his personal Mustang GT on a Texas road trip Uvalde, Texas-Everything is bigger in Texas, especially when it comes to automotive performance. Texas also lays claim to the highest posted speed limit in America at 85 mph. Enter the team from Hennessey Performance Engineering (HPE) who are located just west of Houston. John Hennessey and his merry band of performance car builders like to go fast, so much so that they have their own 1/4 mile dragstrip next to their workshop. Recently, the Hennessey team wanted to test their 717 horsepower HPE700 Supercharged Mustang development car (John's personal car and occasional daily driver) beyond the 130+ mph speeds that they have seen on the dragstrip. "Thankfully, we had recently received an invitation from the guys at the Continental Tires proving grounds in Uvalde to come over and do some testing on their 8.0 mile high speed oval", said Hennessey.

Ford recalling nearly 5,700 2014 F-150s for power steering issue

Ford is recalling 5,675 of its 2014 F-150 pickups over an issue with the electric power steering system. There haven't been any injuries or accidents due to the issue.
Ford spokesman Mike Levine told Autoblog that the "electric power-assisted steering and motor position sensor gear were incorrectly installed by a supplier," leading to the recall.
While the recall is larger on the surface, it's important to note that only 260 trucks have been delivered to customers. The remaining pickups are currently en route to dealers. The affected vehicles were manufactured between May 26 and June 19.

Automakers' rush on aluminum may result in shortage

Aluminum is the new buzzword in the automotive industry. The latest Range Rover and Range Rover Sport both take advantage of the lightweight material to shave huge amounts of body fat (only it's called "aluminium" over there). Audi and Jaguar have been using the stuff for years in their A8 and XJ, respectively, and now, aluminum is going mainstream, arriving on the 2015 Ford F-150.
While we're excited to see aluminum make an impact outside the premium market, its widespread adoption apparently won't come without some problems, notably in terms of supply. "There isn't an automotive manufacturer that makes vehicles in North America that we're not talking to," Tom Boney, of Novelis, the largest global supplier of aluminum sheetmetal, told The Detroit News.
According to Boney, Ford's use of aluminum on such a large scale has forced auto manufacturers in "every boardroom" to reconsider their plans following the F-150's unveiling, for one simple reason: there's not exactly enough aluminum to go around, at least in the short term. The auto industry presently only accounts for six percent of the aluminum sheet produced, but as the material is adopted by more and more brands, that figure is expected to swell to 25 percent within the next six years.