1927 Ford Model T Roadster With Removable Top Very Low Miles Since Build on 2040-cars

Auto blog

2015 Ford F-Series Super Duty Power Stroke

What weighs 30,000 pounds? Big Ben's Westminster bell. A navy ship anchor. Or as we found out during our first drive program for the 2015 Ford F-Series Super Duty, seven pallets of cinder blocks loaded onto a dual-axle gooseneck trailer. The test was part of a raft of towing demonstrations that showcased the new Super Duty's impressive tug capacity, which maxes out at 32,100 pounds. That's 1,200 more than its nearest rival, the Ram 3500, when equipped with its upgraded 6.7-liter Power Stroke diesel V8. Such is the heavy-duty pickup truck business, a diesel-fueled game of one-upmanship with only three players: Ford, Chevrolet/GMC and Ram. And in this game, the one with the most torque wins.
Until 2014, Ford was the one to beat, with its 6.7-liter Power Stroke diesel bringing 400 hp and a massive 800 lb-ft of torque to the table. Then last year, Ram did exactly that, serving Ford with a beefed-up Cummins turbodiesel inline-six in its freshened Ram Heavy Duty truck line with 385 hp and 850 lb-ft of torque, enabling it to tow up to 30,000 pounds. But Ford claims it had designed its engine to be relatively easy to upgrade when the time called for it, so for 2015, Ford bolted a larger turbo to the Power Stroke, bringing output to an insane 440 hp and 860 lb-ft of twist, all without reducing fuel efficiency. Maximum tow capacity rises from 24,700 lbs to an incredible 31,200 lbs for the F-450 dually.
As for GM's HDs? They lag behind the lot with their 6.6-liter Duramax V-8, producing 397 hp and 765 lb-ft of torque. Yeah, you know things are serious when the trucks with 765 lb-ft are the knock-kneed wimps of the lot.

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Car companies used to cook up sales with recipe books

The evolution of automotive marketing has undergone a number of strange phases. Few, though, match the strangeness of the 1930s to 1950s, when automotive marketers turned to cookbooks as a means of promoting their vehicles. Yes, cookbooks. We can't make this stuff up, folks.
This bizarre trend led to General Motors distributing cookbooks under the guise of its then-subsidiary Frigidaire. Ford, meanwhile, offered a compilation of recipes from Ford Credit Employees (shown above). The cookbook-craze wasn't limited to domestic manufacturers, though. As The Detroit News discovered, both Rolls-Royce and Volkswagen got in on the trend, although not until the 1970s.
The News has the full story on this strange bit of marketing. Head over and take a look.