1923 Ford Model T Roadster Pickup Street Rod/ Hot Rod Reduced on 2040-cars

Auto blog

Ford F-450 claims best-in-class towing, company abandons practice of removing items to boost payload number

The ongoing heavy-duty truck battle between Ford and Ram is showing no signs of slowing down. The Blue Oval is trying to remove at least one point of contention between the two brands by testing its 2015 F-450 Super Duty using the Society of Automotive Engineers J2807 towing standard, which Ram also uses. In the new evaluation, the F-450 is rated at a max towing capacity of 31,200 pounds. That's an identical amount as under Ford's own, previous test.
"We leave no doubt with customers that the F-450 pickup truck has best-in-class towing of 31,200 pounds - whether tested using our own internal towing standards or SAE J2807," said Raj Nair, Ford group vice president for Global Product Development, in the company's release.
At the same time, Ford is also changing how it calculates the F-450's payload. Instead of using its minimum curb weight as before, the brand is now using the truck's base curb weight. The revision lowers the pickup's rating to 5,300 pounds, compared to 5,450 pounds previously. The company said in its announcement that the reason for this is "aligning its payload rating practices with other manufacturers to make it easier for customers to compare vehicles." General Motors made a similar switch for its pickups in August.

Weekly Recap: Ford GT inspires guitar, foosball table, sailboat

Ford design vice president Moray Callum had just wrapped up a briefing on the interior of the Ford GT last month, but something seemed out of place. He grinned and pointed behind him, "You might be wondering why I have a boat behind me," he said mischievously. It was there because Ford set its designers on a mission to stretch and showcase their talents: design non-automotive objects inspired by the interior of the GT supercar. Callum received quite a response, too. His team produced a guitar, a foosball table (yeah bro!), a racing sailboat, a Wi-Fi speaker and some furniture. As the veteran design chief explained, "It's a really great exercise both to highlight our designers' talents, but also to really see how our design philosophy can work and how you can use it and get a common response back from a worldwide design team." Guitar View 25 Photos The objects have been on display this week at the Salone del Mobile furniture and fashion design fair in Milan, Italy, where Ford has had a presence for three years. There's also a light exhibition that apparently was inspired by the GT, as well. While this might seem a little far-fetched for the automaker, Ford said exhibitions like the Salone del Mobile give its designers another way to be creative and ultimately produce striking interior style. Ford wants this to be a differentiator, as research shows consumers are placing emphasis on the layout and features inside when they're making a decision about buying a new car. It's a little light hearted – but it's also potentially big business. Other News & Notes Cadillac CT6 platform could be used for Buick General Motors product chief Mark Reuss said the Cadillac CT6 platform could be used for a large Buick, though "not yet," Automotive News reported. The underpinnings can accommodate rear-wheel or all-wheel drive and would give Buick the large flagship it lacks. The report jibes with comments Reuss made at a roundtable with Autoblog and other reporters at the New York Auto Show. When asked if Buick had space for a large car on the CT6 chassis, he replied, "Yeah, I think it does. Yeah, I think we do." Buick has revamped its lineup in recent years with attractive crossovers and small and midsize sedans, but hasn't added the proverbial flagship that's yearned for by enthusiasts. Buick surprised industry observers with the stylish Avenir concept at the Detroit Auto Show earlier this year that raised the possibility of a halo sedan.

Plug In 2014: ALTe ready to join Ford's EQVM to convert, sell F-150 PHEV [w/video]

It's been a while since we've checked in with ALTe and its plans to convert big work vehicles like the Ford F-150 into plug-in hybrids. So, when we saw a demonstration vehicle sitting outside the San Jose Convention Center at the Plug In 2014 Conference last week, we had to get a closer look. When we did, we realized that it's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. It's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. The reason for the well-worn F-150 with 30,000 miles on it is that ALTe has been showing off its extended-range EV technology to lots of people all around the country, and Kyle Maki has been the man on the scene more often than not. "This one, I've taken all over the country," he told AutoblogGreen. "I've wore out that seat, I think. The only reason this one wasn't driven here was because we were in Charlotte [NC] last week and I didn't want to take a chance and not make it in time for this event." In other words, ALTe is out there, ginning up excitement for the idea of a plug-in hybrid Ford with an electric range of up to 40 miles and which can then continue on gas for another 360 miles at around about 25 miles per gallon. ALTe wants to not only convert new vehicles but it also offers retrofits for fleets that are happy with their current fleet. The company offers converted versions of the Ford E350 and E450 utility vehicles now but the near-mythical F-150 PHEV is still "coming soon." Yes, orders are now being accepted, but you will be forgiven if you think this is all happening on a slow time scale. There are simply a lot of things to do before ALTe can sell the truck. ALTe is currently attempting to join Ford's EQVM program, which is the electric version of the standard Qualified Vehicle Modifiers program. The QVM program requires coachbuilders to "be successfully evaluated by Ford Motor Company on criteria such as engineering, the manufacturing process, quality control, and adherence to Ford and Lincoln Divisions guidelines." Qualified applicants must also meet all applicable Federal Motor Vehicle Safety Standards, conform to Ford/Lincoln conversion guidelines and agree to be inspected annually as well as have a "commitment to continuous improvement." Maki has a simpler explanation. "It basically means you're a preferred supplier, a Tier 1, if you will," he said.