Shay Motors Reproduction Of A 1929 Ford Model A, Deluxe Roadster on 2040-cars

Auto blog

Ford recalls 434k vehicles for several unrelated issues

It seems that the hard winter in much of the country has been as rough on some Fords as it has on many people. The Blue Oval is recalling roughly 434,000 vehicles in two separate recalls, and one of them partially caused by the salt used to melt the snow on roads.
The first recall covers 385,750 2001-2004 Escape models in the Midwest, Northeast and Canada because a subframe could rust and eventually fail. This is partially due to the road salt used in those areas, and about 349,000 of the affected vehicles are in the US. To remedy the problem, dealers are installing a reinforcement cross brace on the frame to strengthen them. There has been one crash caused by the failure but no injuries. According to The Detroit News, this is not the first rust-related recall for Ford. It estimates the company has repaired over two million vehicles since 2010 for problems on vehicles related to the iron oxide, including the rear wheel wells of the Freestar minivan.
The second recall covers 48,950 2013-2014 Ford Fusion, Escape, C-MAX and Lincoln MKZ models because welds in their seatbacks don't meet National Highway Traffic Safety Administration standards. The fault affects the front seats, and the sub-standard welds joining the setback to the recliner could increase the chance on injury. There have been no reported injuries or accidents caused by the problem, but there are 42,972 affected vehicles in the US and 4,744 in Canada.

My year in EVs: 8 electrics that are changing the car industry

The year 2021 will go down as an inflection point in the auto industry’s transition to electric vehicles. It's when many much-anticipated models became reality. No longer sketches or sketchy prototypes, electric vehicles appeared from all corners with everything from the Lucid Air to Ford Mustang Mach-E changing how we think about transportation. I managed to drive a lot of them, and as I went through my notes, I realized IÂ’ve got a mini memoir of the seminal EVs of 2021. HereÂ’s my take on eight of them. Hummer EV Easily the most over-the-top EV I tested this year. The 1,000-hp super truck lived up to the hype with its domineering presence, stupendous power and simply being a reincarnated Hummer. I took it for a short spin on- and off-road at the General Motors Proving Grounds in Milford, Mich., and was impressed with the airy cabin, removable sky panels and expansive touchscreens. Yes, I crab walked, which felt like steering a pontoon boat, though I can see why it would be useful. Lucid Air Dream Performance The most beautiful sedan I tested all year, EV or otherwise. Unlike the futuristic Mercedes EQS — which is quite attractive — LucidÂ’s car is a blend of mid-century modern interior aesthetics and classic European exterior styling. When I walked up for my test drive, someone who IÂ’m pretty sure was comedian Jon Lovitz was sitting inside and taking it all in. As it sat in the valet of a hotel in a wealthy suburban enclave north of Detroit, the Lucid drew more attention than any of the Mercedes, Cadillacs or Lexus models passing by. The driving experience was enveloping. Starting at $169,000 for the Performance model (reservations are closed), the Lucid I sampled packed 1,111 hp and 471 miles of range. From the precise steering to the comfortable suspension, the dynamics were spot-on. It's a formidable product, and all the more impressive given itÂ’s LucidÂ’s first. Chevy Bolt EV The Bolt was the most pleasant surprise for me. It handled well, offered low-to-the-ground hot hatch dynamics and the steering was dialed-in. Adding a crossover variant for the new generation was a smart play. On a summer morning where I went to a first drive of the Ford Bronco at an off-road course, my hour-long commute in the Bolt was an enjoyable appetizer.  The Bolt was also my biggest disappointment due to its extensive recalls for fire risk. Ironically, I had the Bolt in my driveway when the initial recall went out for the previous generation (2017-19).

This is what a 3D-printed liquid metal Ford Torino looks like

Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.