Custom Built Boattail Model A, Built 355ci Motor, Great Workmanship on 2040-cars

Auto blog

2014 Ford Transit unveiled in Chassis Cab and Cutaway versions

As a leader in commercial vehicles here in the US, we knew Ford wouldn't take too long to show off the chassis cab and cutaway versions of its 2014 Ford Transit van. Set to go on sale this fall, Ford already revealed the full-body version of the Transit, and now it has pulled the cover off exposed-frame models just in time to to compete against the all-new Ram Promaster.
The term "chassis cab" refers to models with a fully enclosed cabin used for box vans or rental trucks, while cutaway models leave the cabin open behind the B-pillars for a pass-through on vehicles such as Class C motorhomes or ambulances. Both will offer three wheelbase options (138, 156 and 178 inches), the choice of single or dually rear axles, and plenty of upfitter-friendly touches including a pre-wired body harness and multiple body mount locations.
The new design will also help make upfitting a little easier since the fuel filler is now built into the cab (just behind the driver's door). Those integrated fuel filler necks will serve to feed either a 3.7-liter V6, a 3.5-liter EcoBoost V6, or a 3.2-liter Power Stroke diesel. Transit chassis cab and cutaways will wear varying Gross vehicle weight ratings from 9,000 pounds to 10,360 pounds depending on spec.

Ford recalling 450,000 Fusion, Mercury Milan sedans

Ford has announced a pair of recalls, and both are critical safety issues. The exponentially larger of the two recall campaigns affects over 450,000 Ford Fusion and Mercury Milan sedans manufactured at the Hermosillo plant between July 21, 2008, and March 4, 2011. The canister purge valve in the fuel tank could malfunction and could cause the top of the tank to crack and leak fuel. That could cause a fire, although Ford "is not aware of any accidents, injuries or fires" resulting from the issue. Affected vehicles will have their ECU software updated and their fuel tanks inspected for potential replacement. The company estimates there are 411,205 affected units in the United States (and its federalized territories), plus another 33,605 in Canada, and 7,055 in Mexico. The second recall affects 13 F-650 trucks. The column shifter's park position mechanism may fracture and let the truck roll away unexpectedly. Those 2016 models built in Ohio between July 29 and September 3, 2015 are all located in the US. Fixing the problem will require replacing the steering column and reconfiguring the instrument panel. FORD ISSUES TWO SAFETY RECALLS IN NORTH AMERICA DEARBORN, Mich., Nov. 23, 2015 – Ford Motor Company is issuing two safety recalls in North America. Ford is not aware of any accidents, injuries or fires related to these conditions. Details are as follows: Ford issues safety recall for certain 2010-2011 Ford Fusion and Mercury Milan vehicles in North America for potential fuel tank issue Ford Motor Company is issuing a safety recall for approximately 450,000 2010-2011 Ford Fusion and Mercury Milan vehicles for a potential issue with the fuel tank. Some of these vehicles might have a canister purge valve that does not work properly, causing internal pressure changes inside the fuel tank. Repeated pressure changes inside the tank could result in a crack on the top of the tank, possibly allowing fuel to leak. A fuel leak in the presence of an ignition source can lead to a fire. Ford is not aware of any accidents, injuries or fires related to this condition. Affected vehicles include certain 2010-2011 Ford Fusion and Mercury Milan vehicles built at Hermosillo Assembly Plant from July 21, 2008 through March 4, 2011. There are a total of approximately 451,865 vehicles that might be affected in North America, including 411,205 vehicles in the United States and federalized territories, 33,605 in Canada and 7,055 in Mexico.

Black Zombie electric Mustang launches Blood Shed Motors [w/videos]

As patient zero of Blood Shed Motors, the classic pony car has received a powerful electric transplant. Lightning repeatedly vanquished the darkness like the angriest of strobe lights and thunder shook the building, punctuating the clatter of a heavy Texas rain on the metal roof as the clock ticked away the initial seconds of a rare full moon Friday the 13th. It was then that the Black Zombie came to life for the first time. Beneath the hood of this rust-free 1968 Mustang fastback, a 289-cubic-inch V8 no longer turns gasoline into heat, noise and pollution. As patient zero of Blood Shed Motors, the classic pony car has received a powerful electric transplant, and now boasts twinned Warp 11 DC motors and a pair of fresh Zilla controllers that will serve as the basic blueprint for future vehicles. Dubbed the Zombie 222 drivetrain, the setup will be limited to 750 horsepower in customer's cars to keep the maintenance experience low, and eventually will draw power from a 40-kWh battery pack. In this first example, though, the output is bit more extreme. For one day, at least, they have the 1,500-kW-capable pack that powers the record-setting Swamp Rat 37 racer belonging to Don Garlits and a brief window of opportunity to try it out on a track. Blood Shed Motors is the result of a collaboration between NEDRA co-founder John "Plasma Boy" Wayland, the man who helped bring electric vehicle drag racing to the attention of the world with his unassuming White Zombie Datsun 1200 conversion and Austin, TX business man Mitch Medford, who've put together a small team of experts in their chosen fields. The plan is to build a limited number of muscle car conversions on pristine early Mustang, Camaro, and Barracuda platforms. The plan is to build a limited number of high-quality muscle car conversions on pristine (No restored rust buckets!) early Mustang, Camaro, and Barracuda platforms. Each can be customized according to buyer's wishes and blessed with its own serial number. The price tags will be in the eye-watering $200,000-and-up neighborhood, reflective of the cost and rarity of these cars and the custom nature of the alterations. Of course, you can't just multiply horsepower and add the monster torque that these electric motors put out and expect an antique chassis to hold up.