1931/1932 Ford Roadster on 2040-cars
Grants Pass, Oregon, United States
1931 Ford low boy roadster (Henry ford steel body) sitting on 1932 frame rails (also Henry ford steel). The front suspension is a 4" dropped I beam with polished stainless 4 bar. Disc brakes, Vega steering box with polished stainless drag links. Rear suspension is Polished stainless ladder bars with coil overs and polished panhard bar with a 1955 chevy 10 bolt rearend. Drivetrain is 455 olds (just rebuilt) with a turbo 350 trans. motor has a offy highrise intake with a demon carb, sanderson ceramic coated headers,m/t valve covers, lots of polished aluminum and chrome. Aluminum radiator rated for 1000 h.p with electric fan(runs very cool) 1932 grill shell. Wheels are boss 20" rear and 18" front. Interior has a polished tilt steering column with billet steering wheel, dolphin gauges, genie swan shifter. Car has a bench seat and the upholstery needs to be finished. 15 gallon fuel tank. Car has a bitchin stance and drives awsome and fast! Only has 1500 miles on it since build. Paint is a single stage satin red that really stands out.
|
Ford Model A for Sale
- 1930 ford model a sedan tudor ca-car original steal like 1931 1932 hot rod coupe
- 1930 ford model a deluxe total restoration better than new flat head 4 cyl 3spee
- 1931 ford model a tudor
- 1929 model a special coupe, rumble seat, original, nice chrome, runs great
- All steel 1929 model a roadster pickup(US $25,900.00)
- Beautifully restored 1930 ford model a roadster w/ rumble seat.
Auto Services in Oregon
Tualatin Auto Repair & Towing ★★★★★
Toy Doctor ★★★★★
Today`s Automotive ★★★★★
The Jag Shop ★★★★★
T V G Inc ★★★★★
T & T Tire ★★★★★
Auto blog
Ford recalls 9,900 vehicles across two campaigns
Tue, Dec 29 2015Ford is recalling a total of 9,885 vehicles in two campaigns. The Basics: In one recall, Ford will recall 9,017 examples of the 2013 Escape with build dates from January 11, 2012, to April 1, 2013, and the 2013-2014 Focus ST produced between May 3, 2012, and October 14, 2013. The Problem: Splices in the engine wiring harness might not have enough compression, and this can cause the manifold absolute pressure sensor to send incorrect signals to the powertrain control module. This issue could cause the engine to stall. Injuries/Deaths: None reported. The Fix: Dealers will replace the current crimped splices with new splices, according to the National Highway Traffic Safety Administration. If You Own One: The repair campaign will begin on January 4, 2016. More Information: Ford recalled the 2013 Escape and Focus ST in August 2014 for the same problem, and this is an expansion of that campaign, according to company spokesperson John Cangany to Autoblog. The Basics: In the smaller of the two campaigns, Ford will recall 868 examples of the 2013 Explorer, Explorer Police Utility, Taurus, Taurus Police Interceptor, Flex, Lincoln MKS, and MKT. The Problem: The fuel delivery module can crack, which would cause a fuel leak. Injuries/Deaths: None reported. The Fix: Dealers will replace the fuel delivery module. If You Own One: Owners should receive notice soon because NHTSA's report says the recall begins in December. More Information: According to Cangany, this recall is an expansion of a campaign from 2013 for these vehicles. RECALL Subject : Engine Wiring Splices may cause Stall Report Receipt Date: DEC 02, 2015 NHTSA Campaign Number: 15V813000 Component(s): ELECTRICAL SYSTEM Potential Number of Units Affected: 9,017 All Products Associated with this Recall Vehicle Make Model Model Year(s) FORD ESCAPE 2013 FORD FOCUS 2013-2014 Details Manufacturer: Ford Motor Company SUMMARY: Ford Motor Company (Ford) is recalling certain model year 2013 Escape vehicles manufactured January 11, 2012, to April 1, 2013, and 2013-2014 Focus ST vehicles manufactured May 03, 2012, to October 14, 2013. Insufficient compression in the engine wiring harness splices to the Manifold Absolute Pressure (MAP) sensor may provide incorrect signals to the powertrain control module (PCM). CONSEQUENCE: The incorrect signals could cause the vehicle to hesitate or the engine to stall, increasing the risk of a crash.
Plug In 2014: ALTe ready to join Ford's EQVM to convert, sell F-150 PHEV [w/video]
Mon, Aug 4 2014It's been a while since we've checked in with ALTe and its plans to convert big work vehicles like the Ford F-150 into plug-in hybrids. So, when we saw a demonstration vehicle sitting outside the San Jose Convention Center at the Plug In 2014 Conference last week, we had to get a closer look. When we did, we realized that it's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. It's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. The reason for the well-worn F-150 with 30,000 miles on it is that ALTe has been showing off its extended-range EV technology to lots of people all around the country, and Kyle Maki has been the man on the scene more often than not. "This one, I've taken all over the country," he told AutoblogGreen. "I've wore out that seat, I think. The only reason this one wasn't driven here was because we were in Charlotte [NC] last week and I didn't want to take a chance and not make it in time for this event." In other words, ALTe is out there, ginning up excitement for the idea of a plug-in hybrid Ford with an electric range of up to 40 miles and which can then continue on gas for another 360 miles at around about 25 miles per gallon. ALTe wants to not only convert new vehicles but it also offers retrofits for fleets that are happy with their current fleet. The company offers converted versions of the Ford E350 and E450 utility vehicles now but the near-mythical F-150 PHEV is still "coming soon." Yes, orders are now being accepted, but you will be forgiven if you think this is all happening on a slow time scale. There are simply a lot of things to do before ALTe can sell the truck. ALTe is currently attempting to join Ford's EQVM program, which is the electric version of the standard Qualified Vehicle Modifiers program. The QVM program requires coachbuilders to "be successfully evaluated by Ford Motor Company on criteria such as engineering, the manufacturing process, quality control, and adherence to Ford and Lincoln Divisions guidelines." Qualified applicants must also meet all applicable Federal Motor Vehicle Safety Standards, conform to Ford/Lincoln conversion guidelines and agree to be inspected annually as well as have a "commitment to continuous improvement." Maki has a simpler explanation. "It basically means you're a preferred supplier, a Tier 1, if you will," he said.
Britain orders 10,000 ventilators from F1/McLaren/Mercedes/Ford/Rolls-Royce/Airbus
Mon, Mar 30 2020Paramedics and ambulance personnel get instructions from a command unit outside London's ExCel Centre arena, which is being turned into a 4,000 bed temporary hospital called NHS Nightingale to deal with coronavirus patients. The hospital is due to open Monday, March 30. / AP Â Â LONDON — Britain has ordered 10,000 ventilators from a consortium of leading aerospace, engineering and Formula One racing companies which will start production this week in response to an urgent government call for industry to help save lives. The 27-strong team, including Airbus, BAE Systems, Ford and Rolls-Royce, have joined forces to ramp up production of a ventilator made by Smiths Group, which supports those with complications from COVID-19. The consortium, which also includes seven Formula One teams including McLaren and Mercedes, home to World Champion Lewis Hamilton, said they had pulled staff off existing projects to meet the national need. Some 1,228 people have died from coronavirus in the United Kingdom and a senior health official said on Saturday the country would be doing well if it manages to keep the death toll below 20,000. "This consortium brings together some of the most innovative companies in the world," Dick Elsy, the head of the consortium, said in a statement. "I am confident this consortium has the skills and tools to make a difference and save lives." The United Kingdom, which initially only had 5,000 ventilators available in its National Health Service, has been trying to secure additional supplies after realising it needed 30,000 to cope with the peak of the outbreak. Prime Minister Boris Johnson, who is now in isolation in Downing Street after testing positive for coronavirus, made an emergency appeal earlier this month for manufacturers to retool their production lines and start making specialist health equipment including ventilators. Britain now has about 8,000 ventilators, with another 8,000 on order from international manufacturers that are due in coming weeks. Last week it placed an order for a newly-designed model from the vacuum cleaner company Dyson that will need to be approved by the health regulator. Mercedes part of a separate effort, too Separately on Monday a second consortium including Mercedes Formula One and other F1 teams said it had developed in less than a week a new version of a breathing aid that can help coronavirus patients.