1928 on 2040-cars

Auto blog

Man has surgery to remove T-Bird turn signal that's been in his arm for 51 years

In 1963, real estate agent Arthur Lampitt was driving a new Ford Thunderbird near East Peoria, Illinois on his way to an appointment when he collided head-on with a truck. A massive accident that was so bad that it was originally reported as a fatal crash, Lampitt suffered a broken hip and that became the focus of doctors' efforts. In fact, no one noticed the fact that the turn-signal stalk had been broken off the steering column and had lodged itself in Lampitt's arm. Fast-forward to around ten years ago, when Lampitt set off a courthouse metal detector because of a "slender object, about the size of a pencil" in his arm. Despite that unnerving discovery, the doctor who examined Lampitt said that since it didn't hurt, he needn't worry about it. This year, however, it did start hurting and the affected arm started to bulge. Lampitt decided to have the issue seen to, and suspected it might have something to do with his 1963 accident. When he looked through photos of the wreck taken by a friend, he noticed the turn-signal stalk of the Thunderbird missing and figured that was the culprit. After a 45-minute outpatient surgery, the surgeon verified it: a slim, slightly bent and corroded, seven-inch metal cylinder with a trumpeted end. The surgeon said a protective pocket had formed around it, which is why it could remain in Lampitt's arm so long, but it was still unusual - "We see all kinds of foreign objects like nails or pellets, but usually not this large." Lampitt, who is expected to make a full recovery, says he might make a keychain out of it, once he's done just holding it. News Source: St. Louis Post-DispatchImage Credit: Jesse Bogan, St. Louis Post-DispatchTip: Jon Auto News Ford Coupe accident wreck ford thunderbird turn signal

Ford S-Max Concept proves minivans aren't always minivans [w/video]

Ford's latest don't-call-it-a-minivan is called the S-Max Concept, and it's a looker. As you can see, the conceptual overgrown hatch makes good use of Ford's latest design language, especially at the very front of the S-Max, which bears a striking resemblance to production models that include the Focus, C-Max and Fusion.
Powering the S-Max Concept is a 1.5-liter EcoBoost engine, and while Ford doesn't actually list power figures for the concept, previous estimates put the mill at 133 kW of power (about 178 horsepower) and 240 Nm of torque (about 177 pound-feet). Inside, there's room for seven passengers and at least some of their luggage.
As you'd expect, the S-Max is loaded up with all of Ford's latest infotainment technology, including Sync and MyFordTouch. More interestingly, there are also onboard heart and blood glucose monitors that we doubt will be seeing the light of production anytime soon. On that topic, don't expect to see any S-Max-shaped vehicles hitting the US market from Ford, either. Scroll down below for the press release, but not before checking out the high-res image gallery above.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.