1967 Ford Galaxie 500 Base 6.4l on 2040-cars

Auto blog

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Facelifted Ford Focus caught testing in the cold

It's that time in the life of the Ford Focus to get a little work done - a nip-tuck here, some Botox there. Yes, Ford is testing a facelifted version of its global C-segment entry, which first hit markets in Europe and North America in May 2011.
Like the touchup on the Fiesta, expect Ford's gaping grille to make its first appearance on the Focus. Our spy photographers point out that this is likely to be a more comprehensive makeover than previous spy shots suggested, based on the additional camouflage seen here on the front and rear ends of this five-door model. New head and taillights are also likely in order, as are changes to the front and rear fascia.
The interior was also snapped and features a cleaner design with a larger central display. Other than that, it looks like some buttons have been changed, making us think most of the Focus' updates are limited to the exterior.

IIHS updates overlap test: 2 SUVs get good marks, 9 fare poorly

Vehicles in crashes keep occupants safe by deforming around the cabin in a way that maintains cabin integrity. The Insurance Institute for Highway Safety's moderate overlap test, introduced in 1995, has been a huge contributor to improved safety for front-row passengers in a crash. IIHS President David Harkey said, "Thanks to automakers’ improvements, drivers in most vehicles are nearly 50% less likely to be killed in a frontal crash today than they were 25 years ago." In the 'unintentional side effects' column, crash safety has gotten worse for passengers in the back seats. When carmakers reengineered the front crash structure to protect the driver, more crash forces got distributed throughout the rear. IIHS research claims rear passengers have a 46% greater risk of fatal injury than front-row passengers, but back-seaters haven't benefited from the same upgrades in safety as the front row. The IIHS updated its moderate overlap test to address the issue, putting 15 vehicles through the new regime. Two earned good ratings — the 2023 Ford Escape and the 2021-2023 Volvo XC40 — one was acceptable, three were marginal and nine were rated poor. Every one of the crossovers sampled got good marks for all passengers in the original test. That test sees 40% of vehicle's width on the driver's side impacting an aluminum honeycomb barrier at 40 miles per hour. The updated test puts a crash dummy representing small woman or 12-year-old child in the seat behind the driver, the dummy's sensors and grease paint measuring the effectiveness of the restraints and the forces a human body would need to endure. To achieve a good rating, the "measurements must not exceed limits indicating excessive risk of injury to the head, neck, chest, abdomen or thigh." An institute engineer said, "In real-world crashes, chest injuries are the most common serious rear-seat injuries for adults." The sensors and video evidence showed back seat dummies in the Escape and XC40 endured minimal risk of injuries from excessive crash forces, from submarining under the seat belt, or from unwanted interaction with the side curtain airbag.   The Toyota RAV4 scored acceptable. The second-row dummy also endured minimal risk of injury to the chest and lower extremities. However, the lap belt slipped upward in a way that could increase abdominal injuries, and after the dummy's head dipped during crash impact, the head came back up between the rear curtain airbag and rear window.