Ecoboost! Tech Pkg! Navi! Luxury Driver Assist! Moonroof! Export Ok! on 2040-cars

Auto blog

Ford preparing camera-based Front Lighting System

Ford's European Research and Innovation Center in Aachen, Germany is in pre-development on two new lighting technologies that Ford expects to be available "in the near-term." The Camera-Based Advanced Front Lighting System uses GPS and a video camera in the rear-view mirror housing to move the adaptive headlights with the road terrain. When the car detects a roundabout or an intersection, for instance, the light beam widens to offer a bigger view of what's coming from the side. If GPS detected the intersection, the location is tagged so that the beam automatically widens when it is encountered again. The Spot Lighting system uses an infrared camera behind the grille, and is similar to but less complex than systems employed by Mercedes-Benz and Audi. When the infrared camera detects a potential hazard like a person or an animal in or near the road up to 390 feet ahead, it can shine one of two LED spotlights on the danger. A display in the dash cluster will highlight the object with a yellow or a red box, depending on the how close it is and how dangerous it might be. Even though there are only two spotlights, mounted next to the fog lights on the lower front bumper, the system can detect up to eight objects at a time. Don't expect to see these features come to the US, though. Our regulations remain opposed to such headlight trickery, so until that changes, Ford says it's focusing these developments on the European and Asian markets. The video above shows how it works, the press release below has more details. FORD DEVELOPING ADVANCED HEADLIGHTS THAT POINT OUT PEOPLE, ANIMALS IN THE DARK, AND WIDEN BEAMS AT TRICKY JUNCTIONS - Ford is developing advanced lighting technology that enables drivers to more easily see potential hazards when driving at night - Camera-Based Advanced Front Lighting System widens beam at junctions and roundabouts after interpreting traffic signs - GPS-enabled system uses forward-facing camera to remember roadways and direct lighting to help drivers better see bends in the road – effectively lighting the way home on previously travelled routes - Spot Lighting uses infra-red camera to detect pedestrians, cyclists, and animals, and highlight the potential hazards; system can detect up to eight potential hazards and highlight two highest priorities using specially designed headlights and on-screen display AACHEN, Germany, July 17, 2015 – Driving at night, particularly on unlit roads, can be a nerve-wracking experience.

Slew of Ford recalls affect more than a million vehicles

Ford is closing out September with the sad task of alerting owners to five different recalls, two of them camera related. The first is a safety compliance recall affecting 620,246 units of 12 models from the 2020 model year: Edge, Escape, Expedition, Explorer, F-150 and Super Duty, Mustang, Ranger, and Transit, plus the Lincoln Corsair, MKX, and Nautilus. On these vehicles, the circuit board in the rearview camera suffers from insufficient electrical conductivity. The issue can cause the resulting image to not appear or to be distorted, which can lead to an accident while reversing. Ford will begin notifying owners as of November 7 to get their vehicles to dealers for replacement of the rearview camera. The internal Ford reference for this recall is 20C19. The second camera-related issue affects the 2020 and 2021 Ford Explorer, Lincoln Corsair and Lincoln Aviator with the 360-degree camera. Technically, if you own a 2021 Explorer that only has a rearview camera and not a 360-degree camera, neither the above recall nor this one apply to you, but it's probably better safe than sorry here. There are 354,330 crossovers covered by this action. A video output issue could cause the displayed image to cut out, increasing the chances of a reversing accident. Ford will notify dealers starting October 7, the fix being to have a dealer update the Image Processing Module software. The NHTSA campaign number for this recall is 21V735, Ford’s internal reference number is 21S44.  The F-250 and F-350 Super Duty are in for another recalls thanks to potentially improper welds on the front axle's wheel end yoke. A bad weld could alter steering performance, getting the truck to pull left or right, or change the sensitivity of the steering. There are 9,628 affected trucks in the U.S. and 961 in Canada. Dealers will replace the axle assembly if any bad welds are found. Ford's reference number for this is 20S56. The fourth recall affects 38,005 Mustangs in the U.S. and another 2,873 Mustangs in Canada and Mexico from the 2020 model year. In this instance, the brake pedal bracket might fracture during sudden stopping, which can decrease brake pressure and increase the chances of an accident. Ford's internal reference for this recall is 20S52, the fix being to have a dealer replace the brake pedal bracket assembly. Finally, 126,033 units of the 2011 to 2013 Explorer are being recalled over a potential suspension issue.

Former Ford CEO Alan Mulally lands on Google board

Former Ford CEO Alan Mulally often referred to the Blue Oval as a technology company when he led the automaker. Now he'll be offering guidance to a different kind of technology firm: Google.
Mulally was appointed to Google's board of directors July 9, and late Tuesday, it was announced that he will serve on the company's audit committee. The veteran executive led Ford from September 2006 until he retired in June, succeeded by Mark Fields.
While Mulally will act as a board member - rather than in a managerial role - his presence adds credibility to Google's recently announced plans to produce an autonomous car. The ambitious program calls for 100 prototypes to begin testing later this summer. Production of the car is rumored to be in collaboration with a Detroit area performance company, Roush.