2013 Ford Focus Titanium 2.0l/navi/htd/sunroof/sensor/cam/l.e.d/salvage/rebuilt on 2040-cars

Auto blog

Ford recalls 600,000 older-model sedans for braking issue

Ford is recalling 600,166 older-model Ford, Lincoln and Mercury vehicles over an issue that could affect braking and increase the risk of a crash. The safety recall covers certain Ford Fusion, Mercury Milan and Lincoln MKZ sedans from the 2006 through 2010 model years that were built at Ford’s Hermosillo Assembly Plant in Mexico between Feb. 22, 2006, and July 15, 2009. Ford says a valve that is normally closed inside the hydraulic control unit may get stuck in the open position or be slow to close, which could make it harder to engage the brakes and increase risk of a crash. Ford says itÂ’s aware of 15 reports of accidents and two injuries possibly related to the issue. Dealers will inspect the hydraulic control unit for signs of the problem and replace it, if necessary. The dealers will pressure-flush the system with brake fluid and replace the reservoir cap with a new one. Ford is also issuing a small recall of 33 of its 2020 F-150 trucks in the U.S. and 51 in Canada over potentially damaged spare tires. It says the bead area on the tires may have been damaged when it was mounted onto the wheel assembly, leaving it vulnerable to corrosion, separation of the bead wire and ultimately a rapid loss of air pressure and detachment from the wheel. Dealers will replace the spare tire. Affected vehicles were built at the Dearborn Truck Plant from Nov. 10-21 of this year.

How Ford plans to handle insurance and repair questions surrounding new aluminum-bodied F-150

Building a car out of aluminum has a number of benefits - the lighter weight allows the vehicle to be more agile, more fuel efficient, make better use of its power and be more resistant to dings and dents. The downside to the advanced construction, though, is that repairs are both challenging and expensive. That's troubling for the new, aluminum-bodied Ford F-150, because it's kind of made a name for itself as a rugged, durable work vehicle.
How will the legions of Ford buyers cope when it comes time to insure and repair their new trucks? Well, according to Ford, it's expecting a ten-percent jump in insurance costs for the aluminum-bodied F-150, although Ford's truck marketing manager, Doug Scott, was quick to point out that the F-150 is generally cheaper to insure than its competition from Ram and General Motors. "At the end of the day, that's sort of a wash," Scott told Automotive News at last week's Detroit Auto Show. "We've spent a lot of time and feel very comfortable that that's not going to be an inhibitor."
The other issue facing Ford is the distinct lack of body shops that have the training or equipment to repair aluminum-bodied vehicles. AN cites an estimate from the Automotive Service Association claiming that of the 30,000 independent body shops in the US, less than 10 percent are able to work on aluminum.

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.