2012 Ford Focus S Sedan 4-door 2.0l on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

U.S. auto sales fall in July, as Detroit dials back on inventory, rental sales

DETROIT — U.S. carmakers said on Tuesday they continued to slash low-margin sales to daily rental fleets in July as General Motors, Ford and Fiat Chrysler Automobiles struggled to curb a slide in retail sales. July is on track to be the fifth straight month in which the annual pace of car and light truck sales declined from the same month a year ago, in part because of fewer fleet sales, analysts and industry executives said. July 2016 sales hit a strong 17.9-million-vehicle pace. GM said the seasonally adjusted annual sales rate fell to an estimated 16.9 million vehicles in July. At midmorning on Tuesday, GM shares were down 3.4 percent at $34.77, Ford was down 2.8 percent at $10.91, and Fiat Chrysler shares were down 0.3 percent at $12.05 in New York. GM sales dropped 15 percent from a year ago to 226,107 vehicles, as the company cut rental fleet sales more than 80 percent. The automaker said inventories of unsold vehicles at month's end were 104 days, down from 105 days at the end of June. GM has promised investors to reduce inventories to 70 days by year-end. Ford said its July sales dipped 7.5 percent to 200,212 vehicles, as it cut fleet sales more than 26 percent. Inventories fell to 77 days from 79 the previous month. Fiat Chrysler said sales dropped 10 percent to 161,477, as it also cut back sales to daily rental fleets. Among the top Japanese companies, only Toyota reported a year-to-year gain, with sales up 4 percent to 222,057 — just 4,000 units behind GM. Honda sales were down 1 percent to 150,980 — its first-quarter sales continuing to decline in North America but seeing a big increase in China. And Nissan sales fell 3 percent to 128,295. GM, Ford and Fiat Chrysler have cautioned that second-half financial results likely will be lower than first-half results, in part reflecting production cuts in North America and pricing pressures. The automakers this year have been deliberately dialing back sales to rental-car companies, which often generate little to no profit, while struggling to keep retail sales from sagging further, according to industry analysts. Industry consultant LMC cut its full-year forecast for new vehicle sales to 17 million vehicles. Automakers sold a record 17.55 million vehicles in the United States in 2016.

Ford and Chrysler reducing summer plant shutdowns

Most domestic automaker assembly plants traditionally take a couple of weeks off during the summer. The shutdowns give each plant time for much needed repairs and maintenance, and in some cases, help better align production with demand. Not this year, though, as demand for many models is outstripping what Ford, Chrysler and General Motors plants can produce.
Ford has announced that it will shorten its annual summer shutdown for most North American plants from two weeks to one. The shorter shutdown will increase the carmaker's annual North American production by 40,000 units on top of the 200,000 extra units that it was already planning to produce this year versus last. Automotive News reports that Ford produced 2.8 million vehicles on this continent in 2012, and that output this year has already increased 13 percent through April.
Chrysler, meanwhile, is also operating at full tilt and plans to run some plants through the summer with no shutdown at all. Those not getting a break include Jefferson North where the Jeep Grand Cherokee and Dodge Durango are assembled, Toledo North that will assemble the new Cherokee, and Conner Avenue, home of SRT Viper production. Other assembly plants will be down for a single week, while all of Chrysler's engine and transmission plants except one in Indiana will continue operating with no shutdown this summer.