Find or Sell Used Cars, Trucks, and SUVs in USA

2003 Ford Focus, No Reserve on 2040-cars

Year:2003 Mileage:119395 Color: Silver /
 Gray
Location:

Anaheim, California, United States

Anaheim, California, United States
Transmission:Manual
Body Type:Sedan
Engine:4
Vehicle Title:Clear
Fuel Type:Gasoline
Condition:
Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ...
VIN (Vehicle Identification Number)
: 1FAFP33Z73W209874
Year: 2003
Interior Color: Gray
Make: Ford
Number of Cylinders: 4
Model: Focus
Trim: SE Sedan 4-Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: unknown
Mileage: 119,395
Options: CD Player
Exterior Color: Silver

 

PLEASE READ AD IN ITS ENTIRETY PRIOR TO BIDDING

 

 

ALL NEW EBAY BIDDERS, FIRST TIME BIDDERS TO OUR SITE, OR BIDDERS WITH "0" FEEDBACK MUST CONTACT OUR OFFICE WITH YOUR NAME AND PHONE NUMBER BEFORE BIDDING OR YOUR BID WILL BE CANCELED! PLEASE CALL (714) 991-6044.  (IF NO ANSWER, EMAIL YOUR INFORMATION)

  

TODO POSTOR NUEVO EN EBAY, O PRIMERA VEZ APOSTANDO, O POSTOR CON "0" INFORMACION, TENDRA QUE COMUNICARSE CON NUESTRA OFICINA Y DAR SU NOMBRE Y TELEFONO ANTES DE APOSTAR. SINO LA CONCECUENCIA SERA QUE LA APUESTA SERA CANCELADA! (714) 991-6044.

 

Up for auction is a 2003 Ford Focus that was recently donated to a national charitable foundation and is being sold with NO RESERVE.

 

The vehicle is equipped with a 4cyl engine and a 5 speed manual transmission.  The odometer shows 119,395 miles.  It’s fairly well equipped with most of the options.  The seats are gray and appear to be in decent condition, although a good detail will make a huge difference.  The exterior of the car is silver and is showing signs of wear and is faded.  It has a few door dings and scratches.  The tires appear to HAVE ROUGHLY 30% road life left.  Please refer to the photos included in this auction for more description details.

 

This vehicle appears to run and drive ROUGH, however, it has only been driven around our lot and has not been road tested or driven for any duration of time.

 

As is the case with all donated vehicles we do not perform a detailed mechanical or physical inspection.  We simply convey what we are able to observe.  There may be other problems with the car that are not evident.  Therefore, please bid accordingly. 

 

 

INFORMATION CONCERNING SMOG CERTIFICATION:

 

If you are a California Resident intending on registering this vehicle in the State of California, AND not a Dealer, then we will provide you with either a “certificate of compliance” or a “certificate of non-compliance” along with the sale. There will be a 50.00 fee added to your total amount.

 

The California Vehicle Code (CVC) 24007 (b) (2) issued in accordance with section 44015 of the Health and Safety Code, states that buyers can be presented with a certificate of compliance or a certificate of non-compliance (that has been issued within 90 days) before or at the time of sale.  This will allow buyers to pay the registration fees and tax then transfer the car into their name at the DMV and provides them with 90 days of temporary registration from the time the certificate of non-compliance was issued for the vehicle, thus allowing the buyer time to repair the vehicle and bring it into smog conformity.

 

INFORMATION CONCERNING VEHICLE TITLE:

 

This vehicle comes with a clear California Title and its Registration is valid through 8/14.

 

INFORMATION CONCERNING VEHICLE CONDITION:

 

We make every effort to photograph important details of the vehicles body condition, however small dings, scratches and blemishes in the vehicles paint and body are often difficult to catch in the camera lens, so if you fail to personally inspect the car, please know that these imperfections may exist.

 

Since the car was donated we do not have any further information on the vehicle other than what is provided herein.  Once again - As is the case with ALL our donated vehicles we can only provide bidders with a very limited evaluation of the car's condition.  We are not in the body shop or automotive repair business and cannot guarantee that our observations are 100% accurate.  The car has not been formally inspected and buyers should understand that the opinions provided herein are purely observational and are not a guarantee of condition.

 

We welcome and highly advise personal inspections.  Please contact our office at (714) 991-6044 for setting up an appointment.

 

INFORMATION CONCERNING PAYMENT FOR VEHICLE:

 

  • WINNING BIDDERS MUST CONTACT OUR OFFICE AND LEAVE A DEPOSIT WITHIN 24 HOURS AFTER BIDDING HAS ENDED OR PAY IN FULL IMMEDIATELY.  WE CAN BE REACHED BY TELEPHONE AND OR EMAIL.  714-997-3346.

 

 

  • THERE IS A $75.00 DOC FEE THAT WILL BE ADDED TO THE FINAL PRICE FOR VEHICLES SELLING UNDER 1000.00, A $100.00 DOC FEE FOR VEHICLES SELLING OVER 1000.00. FOR EVERY 1000.00 AFTERWARDS, THERE WILL BE AN EXTRA 50.00 ADDED.    FULL PAYMENT IS DUE WITHIN THREE DAYS OF THE END OF AUCTION.
  • VEHICLES NOT PAID IN FULL BY THE 3RD DAY, THERE WILL BE AN EXTRA 50.00 ADDED ON TO THE TOTAL AND 20.00 PER DAY AFTER WARDS.

 

Accepted form of payment is cash in person, credit card (visa or mc only)

 Please note that PayPal transactions can only be used for deposits. You will need to select another payment method above to complete the remainder of your vehicle sale.  Cashier’s check is ok, but vehicle will not be released until payment is cleared.

 

 All taxes, fees, and penalties due to the DMV, are the responsibility of the buyer.

 

INFORMATION CONCERNING PICK-UP OF VEHICLE:

 

Pickup must occur within THREE (3) days of the end of the auction, unless other arrangements are made via phone conversation with Gia.  There will be a storage fee of $30.00 per day for any vehicle left on our premises after this time. VEHICLES WILL NOT BE RELEASED UNLESS FEES ARE PAID.

 

·       The winning bidder is responsible for picking the vehicle up in Anaheim, CA (off the 57 Freeway & 5 Freeway).  The Address is: 928 E. Vermont Ave Anaheim, CA 92805.

.

 

IMPORTANT DISCLAIMER:

 

 “This motor vehicle is being sold “AS-IS”, with all faults, including but not limited to those described herein, as well as any other faults or defects, whether or not presently known or discoverable with or without inspection and operation of the vehicle. Should the motor vehicle be found defective following its purchase, the buyer is fully responsible for any and all servicing and repair costs. MRE hereby disclaims any and all warranties in connection with this sale, expressed or implied.”

 

  • There is NO BUY IT NOW PRICE

 

  • We reserve the right to end the auction early at anytime for any reason

 

  • We DO NOT ACCEPT TRADES, nor will we trade the vehicle you purchased for another vehicle we have listed on ebay!

 

  • We DO NOT SELL PARTS from the vehicle!  The vehicle is sold as is and will not be parted out!

 

·       Please email us if you have any questions prior to bidding.

 

  • Please be sure to check at the bottom of this listing in the “questions from other members” section to see if we’ve already answered a question you may have.

 

·       We do not allow test driving of the vehicles!  We are not authorized or insured to do so.

 

  • We do not overstate or oversell the condition of our donated property.  What you see is what you get!

 

  • By placing a bid, the bidder is acknowledging that he or she has read and understands the terms of the listing, and thereby agrees.

 

  • Once the vehicle leaves the premises, we are not responsible and there will be no refunds.

 

 

**All sales are subject to a $75/$100 administration/Doc fee, $50 Smog (CA), California residents pay sales tax and registration fees. Out-of-State buyers may register and pay applicable taxes in their home state. **The buyer is responsible for all shipping costs.

 

Auto Services in California

Woody`s Auto Body and Paint ★★★★★

Automobile Body Repairing & Painting, Truck Body Repair & Painting
Address: 9020 Gardendale St, Santa-Fe-Springs
Phone: (562) 633-3813

Westside Auto Repair ★★★★★

Auto Repair & Service, Auto Oil & Lube, Brake Repair
Address: 115 McPherson St, Davenport
Phone: (831) 600-7074

West Coast Auto Body ★★★★★

Automobile Body Repairing & Painting, Truck Body Repair & Painting
Address: 15144 Valley Blvd, Cerritos
Phone: (626) 961-2779

Webb`s Auto & Truck ★★★★★

Auto Repair & Service
Address: 2146 S Atlantic Blvd, Bell-Gardens
Phone: (323) 268-1266

VRC Auto Repair ★★★★★

Auto Repair & Service
Address: 2409 Main St, Moreno-Valley
Phone: (951) 276-3280

Visions Automotive Glass ★★★★★

Auto Repair & Service, Glass-Auto, Plate, Window, Etc, Glass-Automobile, Plate, Window, Etc-Manufacturers
Address: 8698 Elk Grove Blvd #1-238, Walnut-Grove
Phone: (877) 312-0678

Auto blog

Ford starting up 2.0L EcoBoost engine production in Ohio

Fri, 22 Feb 2013

Joe Hinrichs, Ford's President of The Americas (pictured above), announced today that in late 2014, the automaker will be building the 2.0-liter EcoBoost four-cylinder at its Cleveland Engine Plant, a move requiring a $200-million investment and the hiring of 450 new employees. European-built Ford products will continue to source this engine from the Valencia, Spain plant where all of these EcoBoost four-cylinder engines are currently built, and the new Cleveland engines will be used for all North American-made models.
Ford is planning to build its popular EcoBoost engines regionally to maximize production capacity and meet customer demand. Last year, Ford sold 334,364 vehicles with EcoBoost engines in the US alone, and that number is expected to swell to more than 500,000 by the end of this year, with global sales expected to total 1.6 million. By 2015, Ford says that 95 percent of its nameplates will offer an EcoBoost engine.
One such vehicle that could be adding an EcoBoost engine, according to Automotive News, is none other than the 2015 Ford Mustang. The report says that Ford could use either the 2.0-liter EcoBoost or an upcoming 2.3-liter EcoBoost in the sixth-generation pony car.

Ford F-Series Super Duty prototype reduced to smoldering mess of aluminum and steel [UPDATE]

Mon, 04 Aug 2014

The most important bit of information you need to know after looking through our high-res gallery of images depicting a prototype 2016 Ford F-Series Super Duty pickup truck burning to the ground is that nobody was hurt. There were two engineers inside the vehicle when it caught fire, and both exited to safety.
That's the good news. The bad news is that the truck, which appears to have been testing in Death Valley, appears to be a total loss, minus, of course, whatever information Ford can glean from the conflagration - particularly tracing it back to its root cause. Besides that, we're also expecting the body of the next Super Duty to be hewn from aluminum, as is the case with its smaller brother, the brand-new F-150. Note the little aluminum droppings littering the roadway as apparent proof of that.
Our spy photographers report that it took just 21 minutes for the F-Series Super Duty to burn completely to the ground. The fire appears to have started in the driver-side front wheel well, spreading to engulf the entire front end in three minutes. We can't confirm the source of the blaze, but we're curious if the car's black vinyl cladding, meant to obscure the secrets within, contributed to the fire.

Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day

Thu, 13 Feb 2014

Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.