2000 Ford Focus Se Wagon 4-door 2.0l on 2040-cars

Auto blog

2015 Ford Mustang fuel economy ratings leaked

Thinking about buying a new Mustang, but want to know what kind of fuel economy it'll get? Well we have our first indication as the pony-car enthusiasts over at Mustang6G.com have gotten a hold of the Monroney window stickers for a few of the new 2015 Mustang models.
Although the V8 model is not among them, we can now see how the EPA has rated those models with a half dozen pistons or less. The Mustang EcoBoost with the turbo four and a manual transmission has been rated at 22 miles per gallon in the city and 31 on the highway. The V6 manual gets 17 city and 28 highway, while the V6 automatic squeezes out a bit more in the city at 19 mpg but carries the same 28 highway rating.
By way of comparison, the latest Chevy Camaro with the V6 and a stick shift gets the same 17/28 EPA rating as a similarly equipped new 'Stang, and the V6 automatic Camaro gets 18/27 (slightly behind the Ford, but if you opt for the Camaro 2LS with its V6, automatic and 2.92 rear axle ratio, you'll be looking at 19 and 30).

Ford expands door-latch recall to 156k more vehicles, nearly 550k total

Ford is being inundated with recalls as of late. Just days ago it called in over 590,000 cars for a variety of issues. Now, the Blue Oval has announced an expansion of its door latch campaign to cover an additional 156,000 vehicles in North America. Counting the original 389,585 cars, this has brought the total to 545,906. Under this expansion, the same models are affected, but Ford is broadening the coverage dates in some cases. The recall covers the 2011-2014 Fiesta, 2013-2014 Fusion, and 2013-2014 Lincoln MKZ; there are 456,440 units in the US, 50,681 in Canada, and 38,785 in Mexico in need of repair. In these vehicles, a door might not latch because of a broken pawl spring tab. Even if a passenger can successfully close it, the faulty part could unlatch while driving. According to Ford, there are two allegations of doors bounding back and hitting a person. There's also one possible accident from a door opening and striking another vehicle. Dealers will replace all of the latches to fix the problem. Related Video: MAY 1, 2015 | DEARBORN, MICH. FORD EXPANDS DOOR LATCH SAFETY RECALL IN NORTH AMERICA DEARBORN, Mich., May 1, 2015 – Ford Motor Company is expanding a safety recall regarding door latches to include approximately 156,000 more vehicles at the request of the National Highway Traffic Safety Administration, bringing the total to 545,906 vehicles in North America. The door latch in certain vehicles may experience a broken pawl spring tab, which typically results in a condition where the door will not latch. If a customer is then able to latch the door, there is a potential the door may unlatch while driving, increasing the risk of injury. Ford is aware of a total two allegations of soreness resulting from an unlatched door bouncing back when the customer attempted to close it, and one accident allegation when an unlatched door swung open and struck the adjacent vehicle as the driver was pulling into a parking space. Affected vehicles include certain 2011-14 Fiesta vehicles built at Cuautitlan Assembly Plant, Nov. 3, 2009 to May 31, 2013; certain 2013-14 Fusion vehicles built at Hermosillo Assembly Plant, Feb. 1, 2012 to May 31, 2013; certain 2014 Fusion vehicles built at Flat Rock Assembly Plant, April 12, 2013 to April 26, 2013; and certain 2013-14 Lincoln MKZ vehicles built at Hermosillo Assembly Plant, Feb. 1, 2012 to May 31, 2013. There are 456,440 vehicles in the United States and federalized territories, 50,681 in Canada and 38,785 in Mexico.

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.