2011 Ford Flex Sel Sport Utility 4-door 3.5l Clear Title Recovery History on 2040-cars

Auto blog

Ford Gets The Aluminum F-150 Ready For Prime Time

Russell Barnett, a Ford dealer in Tennessee, is ready for aluminum. Ford is using the metal almost exclusively in body of the 2015 version of its best-selling F-150 pickup, which starts arriving at dealerships next month. Barnett is already answering customers' questions about the truck. And he's updated his repair shop not only for the F-150, but in anticipation that other Ford brands such as the Mustang will eventually make the switch from steel. But, just in case, he ordered some extra steel-bodied 2014 pickups. "There will be some people who won't want to change for a while," says Barnett, who says pickups make up around half of the annual sales at his dealership in rural Winchester. Ford is doubling down on aluminum, which is lighter - and more expensive - than steel but just as tough. The new truck is the company's response to customers' requests for a more fuel-efficient and nimbler pickup. Fordhopes the advantages outweigh customer doubts about the durability of aluminum or potential repair costs for the pricier metal. It's a big risk. So far this year, one out of every three vehicles Ford sold in the U.S. was an F-Series pickup. Morgan Stanley estimates F-Series trucks account for 90 percent of Ford's global automotive profit. On Tuesday, it kicked off production of the new truck at its Dearborn Truck Plant, four miles from the company's headquarters. "Yeah, this is a risk, but it's one well worth taking." said Bill Ford, the company's executive chairman, as he stood alongside the assembly line. "For our customer, this is a big, big leap forward." The trucks have been the best-selling vehicles in the U.S. for 32 straight years; last year, Ford sold nearly 100,000 more full-size pickups than General Motors. Aluminum isn't new to the auto industry, but this is the first time it will cover the entire body of such a high-volume vehicle. Ford made 647,697 F-150 pickups at its two U.S. plants last year; that's one every 49 seconds. If Ford's bet pays off, it could pad its lead in the lucrative truck market. More importantly, aluminum "future proofs" the truck - and the company - in an era of rising fuel economy standards, says Karl Brauer, a senior analyst with Kelley Blue Book. Ford will announce the truck's fuel economy figures later this month. That could determine if it steals customers away from the Silverado or Ram. Truck buyers are among the most loyal in the auto market.

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.

Ford recalls 382k vehicles across six campaigns

Ford needs to repair a total of 381,633 vehicles in North America across six newly announced campaigns, including five safety recalls and one compliance recall. By far the largest of these campaigns covers the 342,271 examples of the 1998-2003 Windstar to double check an earlier recall repair. Among these, 283,413 are in the US and 58,858 are in Canada. The combination of corrosion and stress can cause cracks in the rear axle and eventually lead to the part to snap completely. The company reports a small number of accidents might be connected to this, but there are no injuries. The minivans were recalled for this issue back in 2010, and it was investigated by NHTSA. According to Ford's latest announcement, the reinforcement brackets on some of these models might not have been installed correctly. This time, dealers will perform an inspection. Minivans with incorrectly installed brackets will get a new rear axle. The rest of the owners will be offered a deal to replace the part at a reduced cost. The next largest campaign covers 36,857 examples of the 2015 F-150 to fix a problem with the adaptive cruise control. Specifically, there are 33,481 affected trucks in the US, and 3,376 in Canada. According to Ford, "when passing a large, highly reflective truck" the radar in the system can misidentify a semi as being in the same lane as the pickup. The collision warning system would then activate, slowing the F-150. There's one report of an accident with this happening but no injuries. The fix is simply an update to the adaptive cruise control module software. Ford also has a recall for 1,477 examples of its 2016 F-53 and F-59 stripped chassis models, and they're all located in the US. A manufacturing issue might allow the trucks to shift into reverse without the driver first applying the brakes. There are no reports of any accidents from this, though. To repair the problem, the models get a new transmission shift control bracket and an adjustment to the shift cable. The Blue Oval's safety compliance recall covers 708 examples of the 2016 Fusion and Lincoln MKZ, including 658 of them in the US, 28 in Canada, and 22 in Mexico. On these models, a manufacturing problem with the fuel tank could allow it to crack in a crash, which isn't allowed under federal rules. There are no reports of accidents, injuries or fires. The fix will be a new fuel tank for all of them. The company is also repairing 251 units of the 2015 Taurus and Lincoln MKS, plus the 2016 Explorer.