1955 Ford Fairlane V8 Convertible All Correct Very Desireable Color Combo on 2040-cars

Auto blog

Recharge Wrap-up: Atieva making EV with former Tesla talent, Holland lowers PHEV incentives

A reduction of tax incentives on company cars in Holland is expected to put the brakes on plug-in hybrid sales. Cars are taxed at an average of 25 percent, with plug-in hybrids taxed at just seven or 14 percent, depending on emissions. Taxes on PHEV company cars will increase to 14 and 21 percent. With company car leases making up a third of vehicle sales in 2014, the uptake on PHEVs "will likely go back to regular volumes," according to Volvo's Christiaan Krouwel. It could be a boon for battery electric cars, as their tax rate will remain at four percent for company cars. Read more at Automotive News Europe. Ford is testing cylinder deactivation in its 1.0-liter EcoBoost engine. On-road prototype testing has shown improvements in fuel economy of as much as six percent. Ford engineers developed a system using a new dual mass flywheel, pendulum absorber, and tuned clutch disc to allow cylinder deactivation under a wider range of speed and engine loads with less NVH. "The highest priority in the development of new combustion engines for automotive applications is the ongoing reduction of fuel consumption," says Ford's Andreas Schamel, presenting Ford's findings to the Vienna Motor Symposium. Read more at Green Car Congress or in the press release from Ford. Atieva is building an EV with the help of numerous former Tesla employees. The Silicon Valley-based startup was founded in 2007 by a former Tesla vice president, and its roster includes 12 other former Tesla employees. Already well funded, Atieva is now looking to fill its ranks with more talent, with 32 engineering positions, two recruiter positions and other job openings posted at its website. As for the EV it is working on, Atieva says it is "redefining what a car can be, by building an iconic new vehicle from the ground up." Read more at Charged EVs. Testing shows that Joule ethanol, made from recycled CO2, meets standards for use in the US and Europe. In partnership with Audi, Joule has been working toward making its recycled CO2 fuels ready for commercialization. "We are pleased to achieve another critical step towards our planned near-term delivery of fuel-grade ethanol from recycled CO2," says Joule President and CEO Serge Tchuruk. "Using waste CO2 as a feedstock, our technology has the two-fold advantage of reducing greenhouse gas emissions and producing cost-competitive, drop-in fuels." Joule will use these test results to get government approval for the use of its ethanol in highway fuel.

Ford Explorer Jackson Pollock Edition results in trip to hospital

Among the many useful pieces of driving advice we've taken to heart over the years, "Safely secure all cargo" is etched pretty high on our personal stone tablets. We've had a couple of frustrating moments over the years (numerous wonky cupholders and too-tall lidded cups; a radar detector that released its suction cups and dashed itself below the dashboard, etc.), but never anything like the scene above.
These photos above come courtesy of the Washington State Patrol, and they show the unfortunate aftermath of a driver, his dog, and his Ford Explorer after it crashed near the town of Belfair last week. According to reports, the man was schlepping five-gallon containers of paint inside his vehicle when he was involved in an unexplained accident. It's not clear what triggered the crash, but the impromptu abstract painting covered the whole of the interior, including the driver and his faithful companion.
The man was transported to a local hospital for minor injuries, and his dog was cleaned and later taken to a humane society.

Again? Ford issues second 2015 Fusion and Lincoln MKZ seat belt recall

In 2016, Ford issued a recall for 603,392 2013-2016 Fusions and 2013-2015 Lincoln MKZs due to potentially faulty seat belts. Apparently, that wasn't the end of it. Ford announced another recall this week for the same issue, this time covering 108,399 2015 Fusions and MKZs.  In both cases, the seat belt anchor pretensioners are the issue. According to Ford, "increased temperatures generated during deployment of the driver or front-passenger seat belt anchor pretensioner could degrade the tensile strength of the cable below the level needed to restrain an occupant." Basically, heat could weaken the seat belts, and in extreme cases, they wouldn't be able to keep up proper safety standards. Ford knows of at least one injury that has occurred due to this issue.   The recall includes 103,374 vehicles in the United States, 4,002 in Canada, and 1,023 in Mexico. Possibly affected Fusions were built at Ford's Flat Rock Assembly Plant between August 1, 2014 and January 30, 2015. The MKZs were built at the Hermosillo Assembly Plant between August 1, 2014 and November 21, 2014.  As a fix, Ford says dealers will add an extra coating to the seat belt pretensioner cable for protection from the heat. If this recall might affect your vehicle, call your local Ford dealership and use recall reference No. 19S25. This news comes after Ford recalled 1.3 million Fusions and MKZs in 2018 due to the possibility that the steering wheels could fall off. Fusions have also been recalled due to the risk of rolling away.