Crew Cab Diesel 6.4l 4x4 Turbocharged 4wd Dually Tow Pkg 5th Wheel on 2040-cars

Auto blog

Recharge Wrap-up: Ford 1.0L EcoBoost a hit in Europe; Build a tiny inverter, win $1 million

In Europe, Ford's 1.0-liter EcoBoost engine is the best-selling turbocharged gasoline engine. The three-cylinder motor powers 20 percent of new Fords sold in Europe. Earlier this year, it won its third International Engine of the Year award, and between January and June, it was sold in about 120,000 cars. So far this year, 38 percent of Fords sold in the Netherlands, 35 percent in Denmark and 32 percent in Switzerland have been powered by the 1.0-liter EcoBoost. The engine's turbocharger spins at 248,000 rpm, and provides 24 psi of pressure. The engine produces up to 138 horsepower, depending on the version. Read more in the press release below. When lithium-ion battery packs are retired from the road, remanufacturing, repurposing, and recycling are worthwhile options, according to a study by Mineta Transportation Institute. The study included a cost-benefit analysis of those three options, and found remanufacturing to be the best route. To get the most out of them, batteries should be tested and have their damaged cells replaced then put back to use. Repurposing is the second best option, using the remaining available charge for something besides cars. Recycling on its own isn't profitable, but it could make economic sense with "increased technological breakthroughs." Learn more at Recycling International or download the report here. A smaller inverter for EVs can win you $1 million. The Little Box Challenge is an open competition to build a power inverter with a density of at least 50 watts per cubic inch. Google and the Institute of Electrical and Electronics Engineers (IEEE) are offering the hefty prize to the team that builds the inverter with the highest power density within an enclosed volume of 40 cubic inches. Teams must register by September 30. Read more at Green Car Congress or learn more at the Little Box Challenge website.

Ford highlights new F-650 and F-750 with full-size Tonka show truck [w/videos]

Who among us hasn't been tempted by the prospect of buying a big yellow truck and painting the name Tonka along the side? Well apparently there were some folks over at Ford who were just as tempted, only they actually had the means to make that childhood fantasy a reality in the form of the truck you see here. Revealed at the NTEA Work Truck Show this week in Indianapolis, this Tonka show truck stands nearly 10 feet tall. It's painted bright yellow, just like the one you played with in the sand box (and probably still would given the opportunity and maybe no one else looking) and has a blacked-out nose treatment and special graphics. As you can see, it's also equipped with a working dump bed, and has a truly staggering 33,000-pound gross vehicle weight rating, built to showcase the Blue Oval's new line of medium duty trucks. Of course "medium duty" is a relative term, and the new F-750 is clearly a heavier piece of machinery than the company's own Super Duty pickups, but they're lighter-duty than a proper big rig. The new 2016 Ford F-650 and F-750 are just as tough as the models they replace, but they're now quieter and more comfortable to use. In fact, Ford says its 6.7-liter Power Stroke V8 diesel is now 25-percent quieter inside the cabin at highway speeds, 45-percent quieter at idle and 35-percent quieter standing outside in front of the grille. Ford notes that it's the only medium-duty truck manufacturer that makes its own engines and transmissions. That Power Stroke diesel comes with 270 horsepower and 675 pound-feet of torque as standard, but can be upgraded to 300 hp and 700 lb-ft or all the way up to 330 hp and 725 lb-ft. Commercial buyers will also be able to choose between Regular, Super and Crew Cab models with a straight-frame, dock-height or tractor-towing frames, meaning that whatever it is you've got to haul, chances are high that the new Ford F-650 and F-750 can be set up to get the job done.

Hot-selling Ford Expedition, Lincoln Navigator get production boost

Ford is investing an additional $25 million in its Kentucky Truck Plant in Louisville to increase by 25 percent production of the hot-selling and all-new Lincoln Navigator and Ford Expedition SUVs. The investment adds to $900 million in previously announced spending at the plant, which also builds F-Series Super-Duty pickups and employs 8,400 workers. Assembly-line workers are putting in overtime and working voluntary weekend shifts to keep up with demand. The new investment will cover upgrades to the assembly line but does not involve further hiring, Ford spokeswoman Kelli Felker says. The popularity of the Ford Expedition and Lincoln Navigator is a bright spot as Ford stock has been battered by Wall Street amid concerns concerns about the automaker's future vision and slowness to detect trends. Ford says the investment is an example of its bid to improve "operational fitness," one of CEO Jim Hackett's common refrains. Ford says Navigator retail sales more than doubled in January, and Navigators are spending an average of just seven days on Lincoln dealership lots as customers trade in vehicles including Land Rovers and Mercedes-Benz. Nearly 85 percent of buyers are opting for high-end Black Label and Reserve trim packages, contributing to an average transaction price increase of more than $21,000 in January compared to a year ago. The 2018 Navigator won the North American Truck of the Year award and also topped a Detroit News poll of public favorites at last month's Detroit Auto Show. Sales of the Expedition, meanwhile, were up almost 57 percent last month as the full-size SUVs also spent an average of just a week on dealer lots. Platinum trim models represented 29 percent of sales, pushing transaction price increases up $7,800. Ford gave the 2018 Expedition an all-aluminum body to save mass in its first significant redesign since 2007. The plant last year got nearly 400 new robots, mainly in the body shop, to help increase line speed, and Ford added a robot lab where employees can test software tweaks or troubleshoot issues away from the factory floor. The Louisville plant also benefits from extensive new data analytics, with seven big-screen monitors providing minute-by-minute updates showing progress against hourly targets or alerting workers to pending parts shortages. A huge spare-parts "vending machine" lets workers more quickly locate needed parts and keep inventory at necessary levels.