2005 - Ford F-350 on 2040-cars

Auto blog

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Check out Ford's fully automated self-parking car [w/video]

As automakers continue to find uses for autonomous and semi-autonomous vehicle technology, Ford of Europe has announced that it is developing a self-parking system for future use. More advanced than the Active Park Assist already offered in many Ford products, the new Fully Assisted Parking Aid can take full control of the vehicle and can navigate angled and perpendicular parking spots.
While today's Active Park Assist can only parallel park with the driver controlling the gas, brake and gear selection, Fully Assisted Parking Aid can operate steering, gas, brake and gear selection all while making sure the car is properly parked in the intended space. As with APA, the driver pushes a button to make the car look for a proper spot (at speeds of up to 18 miles per hour), and when an adequate space is located, the operator pushes another button (either inside the car or outside via remote control) for the car to park itself - the button must be pressed throughout the whole parking maneuver. Even though Ford says that the car can effect gear selections on its own, the system must still start from Neutral, and the automaker isn't saying whether the car can put itself into Park when done or put itself in Drive when the operator is ready to go.
Ford is also taking the opportunity to announce its new Obstacle Avoidance technology. This automated system is able to detect objects - including pedestrians - in the road, warn drivers of said objects and, if needed, stop and steer automatically to avoid hitting the obstacle. Both systems are still in the prototype phase, so there is no word as to when we could see either on a production vehicle.

Ford recalls Explorer and Lincoln MKC for fire hazard

The Basics: Ford will recall 5,536 examples of the 2016 Explorer and 2015-2016 Lincoln MKC. The Explorers have build dates between October 20, 2014, and January 28, 2016, at the Chicago Assembly Plant. The MKCs are from between November 25, 2013, and January 25, 2016, at the Louisville Assembly Plant. In total, there are 3,129 total affected examples of the 2015-2016 Lincoln MKC and 2,407 examples of the 2016 Ford Explorer. Of these, 1,543 are in the US and 3,993 are in Canada. The Problem: The combination of the engine block design and the block heater in these vehicles can cause the part to overheat when plugged in. Injuries/Deaths: None reported, but there are two cases of underhood fires in Canada. If you own one: Ford will begin notifying owners during the week of May 16, company spokesperson John Cangany tells Autoblog. Related Video: Ford issues safety recall for certain 2015-2016 Lincoln MKC and 2016 Ford Explorer vehicles to replace engine block heaters Ford is issuing a safety recall for approximately 5,500 2015-2016 Lincoln MKC and 2016 Ford Explorer vehicles to remove the heaters and replace them with an updated design. The engine block design, coupled with the particular block heater installed in these vehicles, causes the unit to be susceptible to overheating when the vehicle is parked and the block heater is plugged in –increasing the risk of an underhood fire. Ford is aware of two reports of underhood fires in Canada, but is not aware of any accidents or injuries related to this issue. Affected vehicles include certain 2015-2016 Lincoln MKC vehicles built at Louisville Assembly Plant, Nov. 25, 2013 through Jan. 25, 2016 and certain 2016 Ford Explorer vehicles built at Chicago Assembly Plant, Oct. 20, 2014 through Jan. 28, 2016. There are 5,536 vehicles affected by the issue, including 3,129 2015-2016 Lincoln MKC and 2,407 2016 Ford Explorer vehicles, with 1,543 of the affected vehicles in the United States and federalized territories and 3,993 in Canada. Dealers will remove and replace the engine block heater with an updated design and, if needed, replace the cord at no cost to the customer.