2015 Ford F250 Super Duty on 2040-cars

Auto blog

Recharge Wrap-up: Ford 1.0L EcoBoost a hit in Europe; Build a tiny inverter, win $1 million

In Europe, Ford's 1.0-liter EcoBoost engine is the best-selling turbocharged gasoline engine. The three-cylinder motor powers 20 percent of new Fords sold in Europe. Earlier this year, it won its third International Engine of the Year award, and between January and June, it was sold in about 120,000 cars. So far this year, 38 percent of Fords sold in the Netherlands, 35 percent in Denmark and 32 percent in Switzerland have been powered by the 1.0-liter EcoBoost. The engine's turbocharger spins at 248,000 rpm, and provides 24 psi of pressure. The engine produces up to 138 horsepower, depending on the version. Read more in the press release below. When lithium-ion battery packs are retired from the road, remanufacturing, repurposing, and recycling are worthwhile options, according to a study by Mineta Transportation Institute. The study included a cost-benefit analysis of those three options, and found remanufacturing to be the best route. To get the most out of them, batteries should be tested and have their damaged cells replaced then put back to use. Repurposing is the second best option, using the remaining available charge for something besides cars. Recycling on its own isn't profitable, but it could make economic sense with "increased technological breakthroughs." Learn more at Recycling International or download the report here. A smaller inverter for EVs can win you $1 million. The Little Box Challenge is an open competition to build a power inverter with a density of at least 50 watts per cubic inch. Google and the Institute of Electrical and Electronics Engineers (IEEE) are offering the hefty prize to the team that builds the inverter with the highest power density within an enclosed volume of 40 cubic inches. Teams must register by September 30. Read more at Green Car Congress or learn more at the Little Box Challenge website.

Rare Ford Mustang ASC McLaren is a piece of '80s history

You can't blame the dealer for advertising this oddball convertible as a "Ford Mustang McLaren." The name certainly rolls off the tongue better than "Ford Mustang ASC McLaren," and it makes the car sound a whole lot more appealing. However, without the 'ASC' in there, you don't get the full picture. And when it comes to the world of strange automotive collaborations—particularly those of the 80s—you most definitely want the full picture. ASC McLaren Mustangs were the result of fortuitous timing, and a project that was already underway between the American Sunroof Company and McLaren (no, not that McLaren). Detroit custom car builder Peter Muscat brought the idea of a Mustang with a tonneau cover to ASC after chopping the top off a Fox body on his own, and in turn ASC founder Heinz Pretcher brought the concept to Ford. Big blue was already in the midst of relaunching a Mustang convertible, which had been absent from the lineup for 10 years, so initially it was the Mercury Capri that got the ASC/McLaren treatment. The result was a car that was more expensive than a Mustang GT, and coupled with declining sales of the Capri overall, the car was discontinued in 1986, paving the way for the ASC McLaren Mustang you see here on eBay. With the change over to the Mustang as their platform for modification in 1987, ASC McLaren were given the opportunity to create something notable. Customizing the Capri was one thing, but the Mustang name carries with it iconic status. So what did ASC McLaren do with their chance to leave their mark on automotive history? They gave the car some visual modifications, both inside and out, but like the Capri, left the powertrain untouched. Also like the Capri, the cars still ended up costing more than $20,000. Between the high price, the economic woes of the late 80s, and disputes between Muscat and Pretcher, the ASC McLaren Mustangs were no more by 1990. During the three year run, 1,806 ASC McLaren conversions were completed, making them quite rare, especially low mileage examples like this one. The 5.0 V8s are known for being stout engines, capable of handling serious modification, and logging lots of miles, so there are no concerns there. The 5-speed Borg-Warner transmission that came in all Mustang GTs is also known for being a durable unit, the '87-'90 versions especially so. The main concern here would be the life the car has lived, and more importantly where it has lived.

How Chevy Silverado, GMC Sierra will take on the Ford F-150 profit machine

FORT WAYNE, Ind. — When General Motors engineers were developing the 2019 Chevrolet Silverado and GMC Sierra pickup trucks, some of them joined public tours of Ford's Dearborn, Mich., factory to watch aluminum-bodied F-Series trucks go down the assembly line. The redesign of the Ford F-Series trucks, launched in 2014, set a new standard for fuel economy and lightweight vehicle construction. But armed with stopwatches and trained eyes, the GM engineers believed they saw problems. "They had a real hard time getting those doors to fit," Tim Herrick, the executive chief engineer for GM truck programs, told Reuters. His team did more intelligence gathering. They bought and tore apart Ford F-Series doors sold as repair parts. Their conclusion: GM could cut weight in its trucks for a lower cost using doors made of a combination of aluminum and high-strength steel that could be thinner than standard steel, shaving off kilograms in the process. These pounds-and-pennies decisions will have major implications in the highest-stakes game going in Detroit: dominance in the world's most profitable vehicle market, the gasoline-fueled large pickup segment. What's more, GM is banking on strong sales of overhauled 2019 Silverados and GMC Sierras to fund its push into automated and electric vehicles — a business many investors see as the auto industry's long-term future. The risks are high given the hits automakers have taken from U.S. President Donald Trump's trade policies. Rising aluminum prices spurred by Trump's tariffs are driving up costs on the Ford's F-Series, while rising steel and aluminum prices likewise drag on GM results. GM also has a significant risk should the United States, Mexico and Canada fail to agree on a new NAFTA trade deal, given GM trucks built at its Silao, Mexico, factory could face a 25 percent tariff if NAFTA collapses. Major profit per truck Interviews with GM executives and a tour at its factory here in northwest Indiana provide a detailed look inside GM's plan for the most important vehicles in its global lineup. These big pickups are everything Tesla's Model 3 or Chevy's Bolt electric car is not. The mostly steel body is bolted to the truck's steel frame, rather than the one-piece body and frame electric vehicles. The majority of trucks will have a V-8 gasoline engine powering the rear wheels — like the classic GM cars of the 1950s. Some Silverados will have new four-cylinder engines, but there is no electric or hybrid offering as of now.