2010 Ford F250 on 2040-cars

Auto blog

Ford recalls 9,900 vehicles across two campaigns

Ford is recalling a total of 9,885 vehicles in two campaigns. The Basics: In one recall, Ford will recall 9,017 examples of the 2013 Escape with build dates from January 11, 2012, to April 1, 2013, and the 2013-2014 Focus ST produced between May 3, 2012, and October 14, 2013. The Problem: Splices in the engine wiring harness might not have enough compression, and this can cause the manifold absolute pressure sensor to send incorrect signals to the powertrain control module. This issue could cause the engine to stall. Injuries/Deaths: None reported. The Fix: Dealers will replace the current crimped splices with new splices, according to the National Highway Traffic Safety Administration. If You Own One: The repair campaign will begin on January 4, 2016. More Information: Ford recalled the 2013 Escape and Focus ST in August 2014 for the same problem, and this is an expansion of that campaign, according to company spokesperson John Cangany to Autoblog. The Basics: In the smaller of the two campaigns, Ford will recall 868 examples of the 2013 Explorer, Explorer Police Utility, Taurus, Taurus Police Interceptor, Flex, Lincoln MKS, and MKT. The Problem: The fuel delivery module can crack, which would cause a fuel leak. Injuries/Deaths: None reported. The Fix: Dealers will replace the fuel delivery module. If You Own One: Owners should receive notice soon because NHTSA's report says the recall begins in December. More Information: According to Cangany, this recall is an expansion of a campaign from 2013 for these vehicles. RECALL Subject : Engine Wiring Splices may cause Stall Report Receipt Date: DEC 02, 2015 NHTSA Campaign Number: 15V813000 Component(s): ELECTRICAL SYSTEM Potential Number of Units Affected: 9,017 All Products Associated with this Recall Vehicle Make Model Model Year(s) FORD ESCAPE 2013 FORD FOCUS 2013-2014 Details Manufacturer: Ford Motor Company SUMMARY: Ford Motor Company (Ford) is recalling certain model year 2013 Escape vehicles manufactured January 11, 2012, to April 1, 2013, and 2013-2014 Focus ST vehicles manufactured May 03, 2012, to October 14, 2013. Insufficient compression in the engine wiring harness splices to the Manifold Absolute Pressure (MAP) sensor may provide incorrect signals to the powertrain control module (PCM). CONSEQUENCE: The incorrect signals could cause the vehicle to hesitate or the engine to stall, increasing the risk of a crash.

Recharge Wrap-up: Ford's "snowtonomous" Fusion Hybrid, Porsche eyes battery makers

Bosch and Panasonic are vying to be the battery supplier for Porsche's electric sports car based on the Mission E concept. While Bosch's costs may be higher, its solution would offer simpler logistics. Panasonic is already well established as a battery maker, providing the packs for the Porsche car's rival, Tesla. "We're in the final stage of making a decision," says Porsche CEO Oliver Blume, declining to comment on specific manufacturers. Neither Bosch nor Panasonic provided comment. Read more from Automotive News. Renault will supply a fleet of 150 Renault Zoe EVs for a smart solar charging project in Utrecht, Netherlands. The project involves the installation of 1,000 EV chargers powered by 10,000 photovoltaic panels. The Renault Zoes would be used as part of a carsharing program powered by the solar chargers. Renault and its partners will also implement a vehicle-to-grid system to provide energy during peak demand from the solar chargers and connected EVs. Read more in the press release from Renault. Ford has been testing an autonomous Fusion Hybrid prototype that is capable of driving itself in snowy conditions. Ford uses 3D mapping to scan the drive route. Its LiDAR laser mapping can even detect single falling snowflakes. It collects and processes up to 600 gigabytes of data per hour, comparing its environment to saved maps, a process that helps establish location more precisely than GPS. In addition to the LiDAR systems, the car is also equipped with cameras and radar to help it navigate. Eventually, the car could even be able to clean off its sensors when it detects loss of performance from ice and dirt. Read more in the press release below. FROM AUTONOMY TO SNOWTONOMY: HOW FORD FUSION HYBRID AUTONOMOUS RESEARCH VEHICLE CAN NAVIGATE IN WINTER DEARBORN, Mich., March 10, 2016 – Driving in snow can be a slippery challenge, with the potential for one blizzardy gust to white-out your field of view – a situation faced by the majority of people in the United States. So if self-driving cars are to become a reality – and they almost certainly will – they must be able to navigate snow-covered roads. In its quest to bring self-driving vehicles to millions of people around the world, Ford reveals six facts about its technology that allows for a car to drive itself in snow. 1. Mapping the way: Ford first creates high-resolution 3D maps using LiDAR technology to scan the area its autonomous vehicle will later drive in the snow.

Ford Mustang GT350R adds a lot more than just a new letter [w/videos]

Okay Chevrolet, the ball is in your court. Ford served up one hell of a rebuttal to the track-focused Camaro Z/28, introducing the limited-production Mustang GT350R, complete with over 500 horsepower, over 400 pound-feet of torque and freaking carbon-fiber wheels. Carbon-fiber wheels. Seriously. It's because of those 19-inch hoops, along with some other changes, that Ford was able to slice 130 pounds from the already lightweight GT350 Track Pack. The wheels are responsible for a 13-pound reduction in unsprung weight per corner, while the removal of such superfluous things like the air conditioning, stereo, rear seats, trunk carpet, backup camera and tire inflator accounts for the rest of the weight reduction. Along with the lower weight, Ford has thoroughly reworked the GT350's aerodynamics, adding a simply monstrous rear wing and diffuser, along with vented wheel wells, a new hood vent that both extracts heat and reduces lift. Beside the aero aids, Ford has shod the carbon-fiber wheels in ultra-grippy Michelin Pilot Sport Cup 2 tires, just to guarantee the shiny side remains up. View 21 Photos Ford retained the standard GT350's 5.2-liter, flat-pane V8, Torsen limited-slip differential (complete with a 3.73 rear axle ratio), although as power figures haven't been published for the standard car, there's no way to know whether the GT350R received a power bump. What we do know, though, is that the GT350R will not be limited to the track. While that's certainly its natural habitat, owners will be able to register and drive this monster on public roads. Take a look at the official press release on the GT350R, available below. And also be sure to have a peek at both Ford's stock photos of the new car, as well as our full gallery of live images, direct from the Blue Oval's Detroit Auto Show press conference home at Joe Louis Arena. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.