2005 Tan Cloth Steering Controls Trailer Hitch Used Preowned 174k Miles on 2040-cars

Auto blog

Ford to cease Australian automaking operations after 90 years

Ford began manufacturing cars in Australia in 1925 with the Model T. In 2016, Ford will stop manufacturing cars Down Under, including the Falcon and the Territory SUV. Ford Australia CEO Bob Graziano has reportedly confirmed the closure of the company's Broadmeadows assembly plant and the Geelong engine plant, both in the state of Victoria. There will be 650 jobs lost at Broadmeadows, 510 sacrificed at Geelong. Of the roughly 3,000 workers the Blue Oval has in Australia, it's said it will try to retain about 1,000 of them at its R&D and product development facilities.
The writing hasn't just been on the wall, it's been a regular item in all the papers and on Ford's bottom line for years. As recently as 2003, Ford sold nearly 75,000 Falcons, but over the next four years, annual sales dropped by something like 10,000 units, and over the last two years, it has sold less than 20,000 per year. It isn't only Ford that has suffered - sales of the other large, locally produced sedan, the Holden Commodore, have also gone over the precipice, triggering the same kind of angst about Holden's continued existence. Ford is the smallest of Australia's local automakers, Holden and Toyota the others, and has posted losses of $AUD141 million last year ($136M US) and $AUD600 million ($580M US) in the past five years. Graziano said the cost of manufacturing is simply too expensive in the country, twice as high as Europe and three times as high as Asia, and there no way to make a business case for staying in the country.
In January 2012, Ford Australia announced it would stay in the country until at least 2016, but by July of the same year, most outside observers were quietly declaring that 2016 would be the last year of Ford Down Under, and even the speculation was making other observers nervous. Ford received money from the Victorian government last year to aid its refresh of the Falcon and Territory, which will continue on schedule for the 2014 model year. A front- and all-wheel-drive sedan on a global platform is predicted to replace the Falcon, with some other SUV expected to replace the Territory. The company says it still intends to expand its lineup in the country.

Ford recalls 300,000 Crown Vics over lighting module

The Basics: Ford is recalling 312,814 units of the Crown Victoria and Mercury Grand Marquis sedans from the 2003-2005 model years. They were built at the St. Thomas Assembly Plant between Oct. 3, 2001, and Aug. 2, 2005. Ford says 296,004 of those units are located in the United States, with another 14,714 in Canada and 2,096 in Mexico. The Problem: The solder joints on the lighting control module could crack, depriving the headlamps of the power they need to light the way ahead. That could increase the risk of a crash, particularly at night and in other low-visibility situations. Injuries/Deaths: Ford reports that it is aware of 11 accidents that resulted from the problem, leading to one injury described as "minor." The Fix: The manufacturer is instructing dealers to replace the entire lighting control module. If You Own One: Make sure your headlights are working before getting under way. If they're not, avoid driving under low-light conditions, including at night, in heavy precipitation, or in fog. Ford Issues Three Safety Recalls and One Safety Compliance Recall in North America DEARBORN, Mich., Dec. 22, 2015 – Ford Motor Company is issuing three safety recalls and one safety compliance recall in North America. Details are as follows: Ford Motor Company issues safety recall for certain 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles to replace lighting control module Ford Motor Company is issuing a safety recall for approximately 313,000 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles to replace a lighting control module. The solder joints on the module could crack and interrupt power to the headlamps – increasing the risk of crash at night. Ford is aware of 11 reports of accidents and one report of a minor injury related to this issue. Affected vehicles include certain 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles built at St. Thomas Assembly Plant, Oct. 3, 2001 through Aug. 2, 2005. There are a total of 312,814 vehicles that might be affected in North America, including 296,004 in the United States and federalized territories, 14,714 in Canada and 2,096 in Mexico. Dealers will replace the lighting control module at no cost to the customer. Ford issues safety recall for certain 2016 Ford F-650 and F-750 vehicles to replace rear air brake chamber Ford is issuing a safety recall for 177 2016 Ford F-650 and F-750 vehicles to replace the rear air brake chamber.

NHTSA upgrades Ford floor mat unintended acceleration probe

According to a Bloomberg report, the National Highway Traffic Safety Administration has upgraded an investigation into complaints of unintended acceleration lodged against Ford vehicles. The investigation began in June of 2010 when just three complaints had been received and it only concerned the Ford Fusion and Mercury Milan, but this was at a time when the phrase "unintended acceleration" made grown men go pale. With 49 additional complaints received since then, the investigation has been reclassified as an engineering analysis - the last phase before a recall - and it has been expanded to include the Lincoln MKZ, making for a total of "around 480,000" units affected between the three sedans from the 2008 to 2010 model years.
The ostensible cause is that floor mats are trapping the accelerator pedal, but according to a Ford statement at the time, the entrapment is due to owners placing the optional all-weather floor mats, or aftermarket floor mats, on top of the car's standard floor mats. NHTSA has backed up that assessment, pinning the blame on "unsecured or double stacked floor mats."
On the face of it, it would appear that NHTSA has upgraded the status not because of Ford's error, but owner error, and Ford has stated publicly that it is "disappointed" in NHTSA's move. On top of NHTSA still being skittish after that other unintended acceleration debacle, it could be seen to be taking its time investigating all of the variables: it's reported that Ford changed its accelerator pedal design in 2010, a "heel blocker" in the floorpan has been considered a potential culprit in how the floor mats could be trapping the pedal, some drivers have said the floor mats weren't anywhere near the pedal, and according to a report in the LA Times, in "a letter sent by Ford to NHTSA in August 2010, the automaker said it found three injuries and one fatality that 'may have resulted from the alleged defect.'"