2016 Ford F-150 Platinum Crew Cab Pickup 4-door on 2040-cars

Auto blog

NHTSA and Ford investigating steering issues in Crown Vic, Grand Marquis and Marauder

There may be more steering woes for the Ford Crown Victoria. The National Highway Traffic Safety Administration has opened a preliminary evaluation into the Crown Vic and Mercury Grand Marquis from the 2004 to 2007 model years and the Mercury Marauder for the 2004 and 2005 model years because the steering shaft can jam. The issue could potentially affect an estimated 500,000 vehicles.
According to the regulator, there is a possibility that the driver's side heat shield for the exhaust manifold can rust, dislodge, and then wedge into the steering shaft. If this occurs, it leads to a situation where the driver can no longer control the car.
NHTSA has received five complaints of this happening, including one alleged case with an injury. In that situation, the car was driving onto the highway, lost control and rolled over. One occupant was hurt in the accident.

Ford finally issues recall for 230K minivans over rust problems

The rust issue in the rear wheel wells of 2004-2007 Ford Freestar and Mercury Monterey minivans has finally led to a recall. The National Highway Traffic Safety Administration began an investigation into the matter in 2011, said investigation being upgraded to an engineering analysis a year later while NHTSA tried to figure out how many model years should be included in the assessment.
Ford has decided to recall all of the 230,000 minivans potentially affected, namely those sold in salt-belt states and countries like Canada. The excess rust in the rear wheel wells was also able to prevent the third-row seats from locking to the floor of the minivan. To repair the problem, owners can take their minivans to dealers, and the dealers will place new panels in the wheel wells, replace the third-row seat mounting brackets and relocate the latches to an area away from any corrosion.
Ford says it will begin notifying owners during the last week of March.

Ford reveals EcoBoost-powered Riley prototype for Daytona 24

It's not the first time Ford has participated in the Daytona Prototype class as an engine supplier, but in revealing this new EcoBoost V6-powered Riley Technologies prototype for the new United SportsCar Championship, Ford is making a statement: "We want to show Ford EcoBoost's capabilities as an engine that provides both performance and fuel economy, on and off the track," says Jamie Allison, director of Ford Racing.
In addition to supplying the 3.5-liter twin-turbocharged V6, Ford had its production designer Garen Nicoghosian give the racecar brand-inspired design cues with support from Ford Racing chief aerodynamicist Bernie Marcus.
The car is scheduled to compete at next year's Rolex 24 at Daytona on January 25-26, but before that, Michael Shank Racing is working with Ford at another goal. Driving his Ford Thunderbird, NASCAR champion Bill Elliott set the track's top speed record at 210.364 miles per hour during a qualifying run for the Daytona 500 - way back in 1987 -- and Ford thinks it's about time for that record to fall. What better time the introduction of this new Ford-powered Daytona Prototype? Michael Shank Racing plans to use the twin-turbo V6-powered racer to beat Elliott's record, and it expects to begin prepping for the top-speed run on October 9. Scroll down for the full press release below on Ford's latest race effort.