2014 Ford F150 Xlt on 2040-cars

Auto blog

Ford Mustang pinball machine has supple wrist, plays by sense of smell [w/video]

Ford didn't have anything major to show off at the 2014 Chicago Auto Show, so it seems it instead opted to have some fun - it brought a row of pinball machines to the show. Yes, pinball machines.
We originally told you about the Stern Pinball Ford Mustang machine a few days ago, and as day two of the Chicago show is a bit of a slow one, we opted to head to the show floor and get some snaps of the bank of new machines. Not surprisingly, there's plenty for the Mustang fan in each of these machines, ranging frond different models, to logos to a full model.
Take a look below for our full gallery of live shots, available up top. Then head below for our original gallery of stock images, along with a video and press release on the new machines.

NHTSA investigating 725k Ford, Mercury vehicles for stalling issue

Owners of Ford Escape, Mercury Mariner, Ford Fusion and Mercury Milan models, listen up. According to a report on Automotive News, the National Highway Traffic Safety Administration has opened an investigation into these four vehicles totaling an estimated 725,000 units. The investigation appears to center around a malfunctioning throttle body on non-hybrid models of the 2005-2012 Escape and 2011-2012 Fusion. With Mercury dying off after the 2011 model year, this probe will also apply to the 2005 through 2011 Mariner and the 2011 Milan. There has been some discussion around the Escape stalling issue for some time now, but this investigation appears to be larger in scope than before.
Though not a recall yet, NHTSA's Office of Defects Investigation (ODI) has received 123 complaints of stalling or surging vehicles, while Ford itself has logged 1,472 complaints. The investigation report, which is posted below, seems to indicate that a faulty circuit board for the throttle body could cause the vehicle to go into limp mode, which, according to NHTSA, could cause complaints of both stalling and surging.

Ford Shelby GT350 Mustang is a lean, mean, Z/28-fighting machine [w/video]

If there's one thing you can count on, it's that the renewed rivalry between the Ford Mustang and Chevrolet Camaro will never, ever cease. For every version of Ford's pony car, there's an equally potent Chevrolet. And so with the debut of the Camaro Z/28 earlier this year, Ford has responded with a track-focused 'Stang of its own, resurrecting the Shelby GT350 name.
It looks to be a fine piece of work, this Mustang, with power coming from a naturally aspirated 5.2-liter V8 that will produce "more than 500 horsepower" and "above 400" pound-feet of torque. That grunt runs to the rear wheels via a six-speed manual transmission, and a Torsen limited-slip differential keeps everything in line.
But that's hardly the most impressive piece of the GT350 puzzle. Ford has increased the Mustang GT's chassis stiffness for duty here in the Shelby, and the coupe employs MagneRide damping which automatically adjusts based on road conditions and driver inputs. It's a first both for the Blue Oval and for the segment. And speaking of firsts, the GT350 uses a flat-plane crankshaft - something Ford has never included in a production V8 before.