2008 Ford F-150 Xl Regular Cab White Automatic 4x2 No Reserve Only 40000 Miles on 2040-cars

Auto blog

MotorWeek remembers pre-EcoBoost Ford with the Thunderbird TurboCoupe

Sometimes it feels great to embrace nostalgia for a trip down memory lane, and MotorWeek indulges that occasional desire with its regular Retro Review series. This time, the long-lived show goes back to the '80s to check out two of the top performance vehicles in the Ford lineup at the time – the 1987 Thunderbird TurboCoupe and Mustang GT. Both models had just received thorough refreshes after several years on the market. Long before an EcoBoost badge ever met its models, Ford made early forays into experimenting with turbocharging on vehicles like the T-Bird TurboCoupe. Based on MotorWeek's assessment, the company was on the right track. The boosted 2.3-liter four-cylinder was apparently a bit coarse but offered 190 horsepower with little turbo lag, compared to 155 hp the year before. The Mustang GT is likely the more-fondly remembered of these performance Fords today and provides an interesting point of comparison against the TurboCoupe. MotorWeek found some faults with the 'Stang, though. While it was quick for the time with a sprint to 60 mph in 6.5 seconds, the 'car was described as "a nose-heavy beast" for its handling. And for a look at Ford's future in turbocharging – the GT will have an EcoBoost powerplant – check out our Related Video:

Ford Green Zone works magic with GPS to make your drive smarter, cleaner

For the most part, plug-in hybrids rely on the power stored in the battery until that charge is depleted. Unless the switch can be changed manually, it's only then that the cars fire up the internal combustion engine and begin using the fossil fuels on board. This is ideal, of course, when one's drive isn't long enough that the car needs to start sipping gasoline at all. On longer commutes, when it's certain that the route is longer than the car's all-electric range, this isn't necessarily the most efficient use of energy. Ford's Green Zone system is designed to save some of that juice for the parts of the drive that require slower speeds. Ford is working on a smart system, based on Nokia mapping technology, that uses GPS data to use both the electricity and conventional fuel more efficiently. Since battery power is less efficient at highway speeds, Ford's Green Zone system is designed to save some of that juice for the parts of the drive that require slower speeds, rather than just using up all the electrons right at the beginning of the drive. Using a website or the in-car navigation system, the driver can pinpoint the parts of the route, highlighted in green, where using battery power would be more effective, and set the car to automatically switch to electricity for those sections. Depending on the route, the car could automatically switch back and forth between the two power sources multiple times, particularly if the drive is a mix between city and highway driving. Of course, Green Zone will be go beyond that. The program is being developed to take traffic and road grade into account, details that allow the car to be make even smarter choices to improve efficiency. Ford even hopes to have Green Zone learn driver habits, and respond accordingly depending on who is driving the car. The system could control other features as well, such as anticipating corners and shifting the headlights to better illuminate the road ahead. Green Zone could also potentially use information from vehicle-to-vehicle networking to control functions in the car. The Green Zone system still has a few years before it will be ready to be put into production vehicles, but Ford is confident it will make its way onto the road eventually. As with other innovations that improve efficiency and make our vehicles smarter, we can expect to see similar technology from other manufacturers, until it becomes a regular part of driving in the future.

Plug In 2014: ALTe ready to join Ford's EQVM to convert, sell F-150 PHEV [w/video]

It's been a while since we've checked in with ALTe and its plans to convert big work vehicles like the Ford F-150 into plug-in hybrids. So, when we saw a demonstration vehicle sitting outside the San Jose Convention Center at the Plug In 2014 Conference last week, we had to get a closer look. When we did, we realized that it's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. It's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. The reason for the well-worn F-150 with 30,000 miles on it is that ALTe has been showing off its extended-range EV technology to lots of people all around the country, and Kyle Maki has been the man on the scene more often than not. "This one, I've taken all over the country," he told AutoblogGreen. "I've wore out that seat, I think. The only reason this one wasn't driven here was because we were in Charlotte [NC] last week and I didn't want to take a chance and not make it in time for this event." In other words, ALTe is out there, ginning up excitement for the idea of a plug-in hybrid Ford with an electric range of up to 40 miles and which can then continue on gas for another 360 miles at around about 25 miles per gallon. ALTe wants to not only convert new vehicles but it also offers retrofits for fleets that are happy with their current fleet. The company offers converted versions of the Ford E350 and E450 utility vehicles now but the near-mythical F-150 PHEV is still "coming soon." Yes, orders are now being accepted, but you will be forgiven if you think this is all happening on a slow time scale. There are simply a lot of things to do before ALTe can sell the truck. ALTe is currently attempting to join Ford's EQVM program, which is the electric version of the standard Qualified Vehicle Modifiers program. The QVM program requires coachbuilders to "be successfully evaluated by Ford Motor Company on criteria such as engineering, the manufacturing process, quality control, and adherence to Ford and Lincoln Divisions guidelines." Qualified applicants must also meet all applicable Federal Motor Vehicle Safety Standards, conform to Ford/Lincoln conversion guidelines and agree to be inspected annually as well as have a "commitment to continuous improvement." Maki has a simpler explanation. "It basically means you're a preferred supplier, a Tier 1, if you will," he said.