2006 Ford F-150 Fx4 Crew Cab Pickup 4-door 5.4l Ashley/smith Baja Edition on 2040-cars

Auto blog

Ford idling Michigan Assembly Plant to trim Focus, C-Max supply

Ford will be putting the brakes on production at its Michigan Assembly Plant in Wayne, MI, idling production during the weeks of October 28 and December 16. Ford is citing the first drop in US sales in 27 months, a 4.2-percent dip in September, as the impetus for trimming their supplies, according to Automotive News.
Ford's deft management of its supplies has been part of its success over the years, and seeing supplies of Focus and C-Max, the two vehicles built at MAP, rise from 58 and 108 days, respectively, to 71 and 122 days over the span of a month was apparently all that was need to justify the trimming. As AN points out, the rule of thumb for many automakers is to maintain a 60-day supply of vehicles.
"Ford has been focused on keeping their pricing in check. Their operating margin is in double digits. Nobody else is there and they're obviously very proud of that," Alan Baum, an auto analyst with Baum & Associates told AN. Keeping the supply chain operating smoothly and not increasing supplies too much is crucial to that healthy profit margin. After all, a large supply lowers prices ,which, in turn, cuts profit. So while this news might not be great for employees at MAP, who now have an extra two weeks of vacation time, it's far from a sign of problems in Dearborn. Quite the opposite, actually.

IIHS updates overlap test: 2 SUVs get good marks, 9 fare poorly

Vehicles in crashes keep occupants safe by deforming around the cabin in a way that maintains cabin integrity. The Insurance Institute for Highway Safety's moderate overlap test, introduced in 1995, has been a huge contributor to improved safety for front-row passengers in a crash. IIHS President David Harkey said, "Thanks to automakers’ improvements, drivers in most vehicles are nearly 50% less likely to be killed in a frontal crash today than they were 25 years ago." In the 'unintentional side effects' column, crash safety has gotten worse for passengers in the back seats. When carmakers reengineered the front crash structure to protect the driver, more crash forces got distributed throughout the rear. IIHS research claims rear passengers have a 46% greater risk of fatal injury than front-row passengers, but back-seaters haven't benefited from the same upgrades in safety as the front row. The IIHS updated its moderate overlap test to address the issue, putting 15 vehicles through the new regime. Two earned good ratings — the 2023 Ford Escape and the 2021-2023 Volvo XC40 — one was acceptable, three were marginal and nine were rated poor. Every one of the crossovers sampled got good marks for all passengers in the original test. That test sees 40% of vehicle's width on the driver's side impacting an aluminum honeycomb barrier at 40 miles per hour. The updated test puts a crash dummy representing small woman or 12-year-old child in the seat behind the driver, the dummy's sensors and grease paint measuring the effectiveness of the restraints and the forces a human body would need to endure. To achieve a good rating, the "measurements must not exceed limits indicating excessive risk of injury to the head, neck, chest, abdomen or thigh." An institute engineer said, "In real-world crashes, chest injuries are the most common serious rear-seat injuries for adults." The sensors and video evidence showed back seat dummies in the Escape and XC40 endured minimal risk of injuries from excessive crash forces, from submarining under the seat belt, or from unwanted interaction with the side curtain airbag.   The Toyota RAV4 scored acceptable. The second-row dummy also endured minimal risk of injury to the chest and lower extremities. However, the lap belt slipped upward in a way that could increase abdominal injuries, and after the dummy's head dipped during crash impact, the head came back up between the rear curtain airbag and rear window.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.