1967 Ford F-100 Long Bed 2wd 300 6 Cyl on 2040-cars

Auto blog

2016 Ford Focus RS leaked ahead of official debut

We won't officially see the new Ford Focus RS until the Blue Oval shows it to the world at an event on Tuesday, but here it is ahead of time, courtesy of the folks at Evo. As you can see, this is one hot little hatch, and if Evo's story is to be believed, those aggressive looks will be backed up with some pretty serious performance. Power is said to come from Ford's 2.3-liter EcoBoost inline four-cylinder engine, though the magazine's estimate of 250 horsepower seems awfully conservative to us (considering that's less than the current Focus ST). If earlier reports are to be believed, we think the RS will come packing more like 300 hp, if not more. For the first time, the Focus RS will use all-wheel drive with brake-operated torque-vectoring, and Evo says that up to 70 percent of the engine's power can be sent to the rear wheels. Hitting 60 miles per hour will reportedly take less than five seconds. Otherwise, it's business as usual, with a mean-looking exterior complete with the necessary aero bits (notice that wing!), and inside, we can see a beefy set of Recaro chairs. That's really all we know for now, but stay tuned for more when the Focus RS makes its official debut in the not-too-distant future. Related Video:

2015 Ford Mustang invades SEMA, led by King Cobra

Ford showcased more than a dozen customized 2015 Mustangs at its sprawling 20,000-square foot display this week at the Las Vegas Convention Center as the iconic pony car's 50th anniversary celebration continued at the SEMA Show.
While Mustangs are always a hot commodity at SEMA, the new generation brought increased attention from the aftermarket, as builders like Galpin Auto Sports, Richard Petty's Garage and Vaughn Gittin Jr. offered their takes on the new 'Stang.
The extensive display included a range of Mustangs from mild to wild, with everything from a 600-plus horsepower King Cobra pictured at the top, to paint-and-wheel packages. The new regal Cobra, which we spied early in our SEMA adventure this year, may not be the replacement for the Cobra Jet as we speculated, but it does seem to point the way forward for the next iteration of a supreme Ford dragster. Fat drag slicks out back make it's reason for being abundantly clear, and for tells us that modded car is good for a 10.97-second quarter-mile run.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.