2012 Limited Used 3.5l V6 24v Fwd Suv on 2040-cars

Auto blog

Ford finds flex-fuel engine design plays big role in emissions output

How bad is ethanol for your engine? There's been a lot of debate on this issue as the US considers upping the biofuel content in the national gasoline supply from 10 percent (E10) to 15 percent (E15). The ethanol industry and some scientists say higher ethanol blends show no "meaningful differences" in new engines while the oil industry says ethanol creates health risks. Researchers working at the Ford Research and Innovation Center decided to take a closer look at how a wide range of gas-ethanol blends - E0, E10, E20, E30, E40, E55 and E80 - affected the emissions coming out of a flex-fuel 2006 Mercury Grand Marquis. To see the full report, printed in the journal Environmental Science & Technology, requires payment, but there is an abstract and Green Car Congress has some more details. The gist is that, "with increasing ethanol content in the fuel, the tailpipe emissions of ethanol, acetaldehyde, formaldehyde, methane, and ammonia increased." At least NOx and NMHC emissions decreased. The researchers say that the effects are due to the fuel and "are expected for all FFVs," but that the way that a manufacturer calibrates the engine will affect NOx, THC, and NMOG emissions. It's this last bit that's important, since the researchers found, "Higher ethanol content in gasoline affects several fundamental fuel properties that can impact emissions. ... These changes can have positive or negative effects that can depend on engine design, hardware, and control strategy. In addition to direct emissions impacts, higher ethanol content fuel can also provide more efficient combustion and overall engine operation under part-load conditions and under knock-limited higher-load conditions." So, as we head towards more ethanol in our fuel supply (maybe), manufacturers are going to need to learn how to burn it most efficiently.

280-bhp Elemental RP1 revealed, now with bike-engine option

The Elemental RP1 might be Britain's next big boutique roadster success story. Designed by a team with Formula One experience, it aims to mix road car drivability with racecar performance in a single, adaptable package weighing less than 1,000 pounds. It was first previewed a few weeks ago, but the secrecy has finally disappeared due to its upcoming debut at the Goodwood Festival of Speed. The backbone of the RP1 is a carbon fiber and aluminum tub onto which the front and rear subframes bolt on. Inside, it has an F1-like, feet-up driving position that allows for additional underfloor aerodynamic aids to improve downforce. Despite its hardcore nature, Elemental says that it wants the car to be very user friendly. Buyers should be able to drive the RP1 to the track, adjust it with some wrenches, go racing and drive it home. The company even claims the storage areas to either side of the engine offer enough room for a helmet and other racing gear. Hopefully, buyers don't crash, though, otherwise they might be stuck. Elemental is adding two more engine options for the RP1, as well. In addition to the previously announced tuned Ford 2.0-liter EcoBoost with 280 horsepower, buyers can also choose a upgraded version of Ford's three-cylinder 1.0-liter EcoBoost or a model aimed at pure track use with a 999cc Honda Fireblade motorcycle engine. The 2.0-liter uses a six-speed sequential manual gearbox, and a limited-slip differential and alternate gear sets are available as additional options. The first RP1s built will be pure racers for the 2015 season, and the first road cars will follow in the early summer of next year. Pricing isn't set yet, but scroll down for more details and full specs of Britain's latest feather light car for road and track. Introducing the Elemental Rp1 Press Release: 23/6/2014 British sports car manufacturer, Elemental Motor Company Limited, today released further details of their new and innovative, road legal track car, the Rp1. The Rp1 is an open top, road legal, mid engined sports car that incorporates state of the art road and race car technologies. Designed, Engineered and Built by a team with decades of experience in the Formula One and Supercar industries, it brings the concept of a road legal track car firmly into the 21st Century. The Rp1 will be revealed to the public for the first time, this weekend, at the 2014 Goodwood Festival of Speed, where it will located in the Moving Motor Show tent "First Glance" display.

2015 Ford Focus Electric hides in plain sight

The styling changes to the 2015 Ford Focus were shown off at the recent Geneva Motor Show, so what the EV version looks like is not that much of a surprise. Still, the 2015 Focus Electric is making its world debut here at the New York Auto Show, so we wanted to know what changes we are looking at compared to both the internal combustion engine version and the earlier EV models.
The exterior visual distinctions between the ICE and EV are minimal, and basically nonexistent from the A-pillar to the rear. Up front, you can see the charge port, of course, but the front fascia has also undergone a bit of an adjustment. The front doesn't have the ICE version's flattened grille and the EV's Ford logo creates a bump in the hood line where none exists on the ICE. The 2015's grille is also different than the one on the 2014 Focus Electric, being slightly smaller (you can see this better if you compare pictures in our new gallery above to these of the 2011 Focus Electric and these of the gas-powered 2015 Focus).
The updated 2015 interior - which we couldn't access ourselves - has things like a new center stack, improved cupholders and is basically identical between the gas and electric models. With the car off, you can't even tell if you're in an EV or ICE, Seema Bardwaj, the US brand manager for the Focus, told AutoblogGreen. The only things that are different, she said, are extra menu screens to show EV powertrain information to the driver.