2006 Xlt Used 4x4 4 Wheel Drive 3rd Row Seat Tow Package Vs. Mercury Mountaineer on 2040-cars

Auto blog

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.

Ford won't be releasing GT500 lap times for the 'Ring, or any other car

Trucks have towing capacity, EVs have driving range and performance cars have Nürburgring lap times. What do all three have in common? They should all be taken with a grain of salt. Currently, there is no sanctioned way to record lap times or verify production-spec cars - a lesson we recently learned with the 2015 Nissan GT-R Nismo - and until there is a way to do so (and there probably never will be), we'll never officially know the actual time it took for Ford to lap the 'Ring with its ultra-powerful Shelby GT500.
After posting a Ford-made video of a 2013 GT500 running around the 'Ring, the guys over at SVTPerformance.com (an enthusiasts forum not affiliated with Ford or SVT) wanted more answers. They got in touch with Ford's Global Performance Vehicle Chief Engineer Jamal Hameedi, who said until there is a way to verify the times and inspect the cars, Ford will not get involved with lap-time wars. In the email, Hameedi pointed out that the 'Ring is a useful tool in that it allows a wide spectrum of track conditions, but until there is a governed way to record times, there is no way to accurately compare cars head-to-head.
And as much as some may not like it, Hameedi speaks the truth. It really isn't possible to compare times from one car to another, unless those cars were lapping the same track at the same time with the same driver. Not that any of this means there won't be continuous wars by fans and manufacturers alike... in other words, feel free to voice your opinions in the Comments below.

Ford reveals EcoBoost-powered Riley prototype for Daytona 24

It's not the first time Ford has participated in the Daytona Prototype class as an engine supplier, but in revealing this new EcoBoost V6-powered Riley Technologies prototype for the new United SportsCar Championship, Ford is making a statement: "We want to show Ford EcoBoost's capabilities as an engine that provides both performance and fuel economy, on and off the track," says Jamie Allison, director of Ford Racing.
In addition to supplying the 3.5-liter twin-turbocharged V6, Ford had its production designer Garen Nicoghosian give the racecar brand-inspired design cues with support from Ford Racing chief aerodynamicist Bernie Marcus.
The car is scheduled to compete at next year's Rolex 24 at Daytona on January 25-26, but before that, Michael Shank Racing is working with Ford at another goal. Driving his Ford Thunderbird, NASCAR champion Bill Elliott set the track's top speed record at 210.364 miles per hour during a qualifying run for the Daytona 500 - way back in 1987 -- and Ford thinks it's about time for that record to fall. What better time the introduction of this new Ford-powered Daytona Prototype? Michael Shank Racing plans to use the twin-turbo V6-powered racer to beat Elliott's record, and it expects to begin prepping for the top-speed run on October 9. Scroll down for the full press release below on Ford's latest race effort.