2015 Ford Explorer Xlt on 2040-cars

Auto blog

Ford F-150, Chevy Silverado, Toyota Tundra flunk IIHS headlight test

The Insurance Institute for Highway Safety put pickup truck headlights to the test and found that the majority of them were equipped with subpar units. The 2017 Honda Ridgeline was the only truck to earn a rating of "good." The large pickup truck test was comprised of the: 2016 to 2017 GMC Sierra, 2017 Nissan Titan, 2016 Ram 1500, 2016 to 2017 Chevrolet Silverado, 2016 to 2017 Ford F-150, and 2016 to 2017 Toyota Tundra. The Sierra's headlights earned a rating of "acceptable," the headlights found on the Titan and Ram 1500 were found to be "marginal," and the ones on the Silverado, F-150, and Tundra were rated as "poor." IIHS claims the F-150 was the most disappointing out of the large pickup trucks as both its halogen and optional LED headlights failed to provide adequate visibility during testing. The Ridgeline (which earned a "good rating"), is usually considered a midsize or small truck, though IIHS included it in the field of large pickups. The headlights on the 2016 Chevrolet Colorado, 2016 GMC Canyon, 2016 Nissan Frontier, and 2016 to 2017 Toyota Tacoma, which made up the small pickup truck group, all earned a rating of "poor." The IIHS claimed the Colorado had the worst headlights of any truck that was tested, as the base vehicle's units were only able to illuminate up to 123 feet in front of the car. The Ridgeline's headlights, for reference, were able to illuminate up to 358 feet in front of the vehicle. To conduct its test, the IIHS utilizes a special tool to measure how far light is projected out of the headlights in different driving situations. The trucks' headlights were tested in a straight line and in corners, while vehicles with high-beam assist were given extra praise. The headlights on the pickup trucks also mimic the testing that was done on small SUVs and cars earlier this year. Next year, automakers will need to fit their vehicles with headlights that earn a rating of either good or acceptable to earn the IIHS Top Safety Pick+. Related Video:

NHTSA closes Ford F-Series Super Duty steering probe without recall

The National Highway Traffic Safety Administration's investigation into 2008 Ford F-250 and F-350 Super Duty pickups, which was originally opened last year, has now ended without a recall. NHTSA was looking into steering failures on some 336,000 trucks.
The issue rested with the steering gear - NHTSA received five complaints of failures - which was redesigned in 2005. According to the report on the matter, investigators "found evidence of broken sector shaft gear teeth and piston damage consistent with incidents of single event overload."
NHTSA investigators, however, "found no evidence of fatigue or material property defects in any of the fractures. Analysis of complaint rates by vehicle build month showed no patterns indicating potential manufacturing quality issues and no difference before and after Ford introduced design changes to the input shaft and sector shaft seals in July 2007 to address potential leak concerns," according to the report, obtained by The Detroit News.

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.