Ford Expedition Xlt Sport Utility 4-door on 2040-cars

Auto blog

Why Edmunds took a sledgehammer to its 2015 Ford F-150

The discussion around repair bills for the aluminum-bodied 2015 Ford F-150 pickup continued from the beginning of last year to the end, and haven't abated; as an aside, some Tesla Model S owners have been shocked at disquieting repair estimates for minor damage to their aluminum wunder-sedans. Edmunds decided to inject some fact into the fray: it bought a $52,000 long-term 2015 F-150 and clouted it with an eight-pound sledgehammer. Twice. The rear of the bedside took the impacts since it couldn't be replaced, it would have to be repaired. To the pickup's credit, the only reason associate editor Travis Langness hit it twice was that the first sledgehammer blow didn't do as much damage as Edmunds wanted. After the second, the visible damage included the two direct impacts, a few creases, and a cracked taillight, so they drove the pickup to Santa Monica Ford to get an estimate, complete with a fictitious story about how the damage occurred and the mercy plea that Langness was paying for the repair out-of-pocket. In Part 2 Langness hits on some of the details with getting the truck fixed, such as the massively expensive taillight and the list of tools Ford recommends dealers have to work on aluminum. But he was promised he'd have his truck back in seven days, and Santa Monica Ford got it back to him in seven days. In Part 3 we get the bill. It's not small, but it's quite a bit less than it could have been if the service manager had charged Edmunds the official labor rate for aluminum. We're not going to spoil it here, so check out the videos above and below for the beginning and the end, and head over to Edmunds for the complete story about how it all happened and some riffing on the repair numbers. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Related Video:

Ford issues recalls for Fiesta, Fusion, E-Series, and Lincoln MKZ

Ford has issued two new safety recalls for North America. The first covers certain 2014-15 Ford Fiestas, 2014-16 Ford Fusions, and 2014-16 Lincoln MKZs with doors that might not close properly. The second pertains to 2021 Ford E-Series stripped chassis and cutaway vehicles with a wiring harness that might chaffe and expose important wiring.    Ford is recalling 268,343 Fiesta hatchbacks, Fusion sedans, and MKZ sedans across the United States, Canada, and Mexico, with 248,912 of the affected vehicles located in the U.S. The recall says the "latch pawl spring-tab design" could crack in locations where the temperature gets too hot. If the tab breaks, the door might not shut. Or, worse, the door will shut temporarily and reopen once the vehicle is in motion. As a fix, Ford dealers will remove and replace the side door latches. In a separate recall, Ford is targeting 3,631 2021 E-Series stripped chassis and cutaway vehicles. These vehicles could have frame-mounted wiring harnesses that could deteriorate and break due to rubbing on the frame. If the chaffing wears down the harness, wiring for the fuel, trailer tow, and antilock braking systems could be exposed and damaged. In the worst-case scenario, the damage to the fuel pump wiring could cause the pump to stop working, which could stall the vehicle.  Those with affected E-Series vehicles should bring them in to dealerships for inspection. If there is no damage, technicians will add anti-abrasion tape over the area and "ensure clearance to surrounding components." If the harness is damaged, the wiring will be spliced and fixed, then anti-abrasion tape will be added. Ford also issued a third recall, but it is specifically for the Canadian market. On 54,292 examples of 2006-10 Ford Fusions, 2006-10 Mercury Milans, and 2006-10 Lincoln MKZs, a valve inside the hydraulic control unit might stick open. According to Ford, this could result in a longer brake pedal travel, which could possibly create dangerous situations if the driver is unaware. Dealerships will inspect the control units and replace those that are defective. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2021 Ford Bronco and Bronco Sport Leaks!!

Ford announces first non-pursuit-rated police car ever

Ford announced its first non-pursuit-rated Police Interceptor ever, based on the Taurus, which employs the smaller 2.0-liter EcoBoost four-cylinder engine in place of similar pursuit-rated Police Interceptors powered by naturally aspirated 3.5-liter and 3.7-liter V6s and the top-spec 3.5-liter EcoBoost V6. Officially called the Special Service Police sedan, the car was commissioned at the request of law-enforcement agencies that desire a more fuel-efficient vehicle for detectives, administrators and campus police, who don't necessarily need pursuit-rated vehicles.
The 2.0-liter EcoBoost engine produces 240 horsepower and 270 pound-feet of torque, but more importantly, it allows the SSP sedan to achieve somewhere in the neighborhood of 22 miles per gallon city and 32 mpg highway, which are the civilian 2.0-liter Taurus' official EPA ratings. Ford estimates that the SSP sedan will get 20 mpg city, 30 mpg highway and 23 mpg combined, with the help of Active Grille Shutters that open to allow more cooling air through to the radiator, or close to optimize aerodynamics and fuel economy. Those numbers compare favorably to the discontinued Crown Victoria-based Interceptor's 14 mpg city and 21 mpg highway and the newer Taurus-based cars equipped with V6s, the most fuel efficient of which gets 18 mpg city and 26 mpg highway.
If it was driven 90,000 miles over the course of three years, a 2.0-liter SSP sedan would save law enforcement agencies $5,042.92 versus the Crown Vic, Ford estimates. The EPA is expected to post official fuel-economy numbers for the SSP sedan in December. Until then, read the press release below for more information.