2012 Ford Expedition Xl White With Tan Interior on 2040-cars

Auto blog

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

70% of pickups could use aluminum by 2025

In the next decade, the auto industry will see an explosion in its use of aluminum to cut weight and increase fuel economy, according to a study from market analysts Ducker Worldwide cited by The Detroit News. We are already seeing the lightweight metal show up extensively in luxury models from Europe, but with the impending launch of aluminum-intensive 2015 Ford F-150 (pictured above), North America is using it even more, as well. The report predicts 70 percent of US pickups to have aluminum bodies by 2025.
It won't just be pickups that see the benefit, though. The average amount of aluminum in US vehicles is forecasted by the study to grow from an average of 350 pounds in 2013 to about 550 pounds by 2025. The most common parts to use it will be hoods, doors and - to some extent - roofs, as well.
The massive increase in pickups' aluminum content hardly seems surprising. The F-150 is predicted to use so much that it might cause a short-term shortage, according to one earlier report. At the same time General Motors is heavily rumored to be negotiating with suppliers for the next generation Chevrolet Silverado and GMC Sierra. Ram is the last holdout of the Big Three, but the study predicts that not to last.

2015 Mustang-based Saleen S302 to boast as much as 640 hp

The Ford Mustang is obviously a famous performance vehicle in its own right, but it often works even better as a platform for the aftermarket to upgrade. With the all-new 2015 model just now hitting the scene, the famous tuners at Saleen are getting their improvements for the new pony car ready for the world. After recently teasing it, the specs for its fresh S302 model are officially here, along with a first look at it in profile.
Of course, the biggest question on everyone's mind is how much power the company can get from the Mustang's V8. With the 2015 V8 model rated at 435 horsepower and 400 pound-feet, Saleen expects to bump the Ford factory numbers slightly to 450 hp and 410 lb-ft in naturally aspirated form, or with the benefit of a supercharger, it will rocket the engine's output figures to 640 hp and 565 lb-ft. No matter which powerplant a buyer chooses, there are a wide variety of available final-drive ratios with a six-speed manual or automatic gearbox.
Available as either a coupe or convertible forms, Saleen will offer its S302 in three trim levels - White Label, Yellow Label and Black Label. The White Label is the only naturally aspirated one of the bunch, but it still benefits from upgrades like a new exhaust, limited-slip differential, improved suspension, heat extractor hood and rear wing.