2004 Ford Excursion Xlt Sport Utility 4-door 6.8l on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Ford adds 850 jobs to build 2015 F-150

Pickup trucks tend not to advance at quite the same pace as the rest of the industry. That's what makes the new Ford F-150 so remarkable, jettisoning its old steel construction in favor of aluminum. It's a game changer that Ford is betting big on, and in anticipation of surging demand, the Blue Oval automaker is adding 850 new jobs to put the thing together.
Those 850 new employees will be centered at Ford's Rouge complex in Michigan - with 300 at Dearborn Stamping, 50 more at Dearborn Diversified and 500 at the Dearborn Truck facility, the latter of which has already kicked off what Ford describes as "the largest manufacturing transformation in decades." Old manufacturing equipment is being replaced with the latest technologies, and even the Ford Rouge Factory Tour is undergoing a complete overhaul.
The new jobs come as part of the commitments Ford made to the UAW in 2011 to create 12,000 hourly jobs in the United States by 2015 - a number which Ford has already exceeded at 14,000. Over 4,000 of those are centered in southeastern Michigan.

Ford Fiesta ST gets worked out on the track

We're big fans of the turbocharged Ford Focus ST, and we're plenty excited that the Blue Oval will be offering a similar treatment on the smaller Fiesta here in the United States, too. We first saw the production-ready Fiesta ST five-door at the Los Angeles Auto Show last fall, and Ford has now released this video of a Euro-spec three-door ST being flung around the track.
But not just any track - the challenging Track 7 of Ford's Lommel Proving Grounds in Belgium. The course features 20 turns and plenty of elevation changes along its 2.7-mile loop, and David Put, a vehicle dynamic specialist at Ford, shows just how good the pint-sized Fiesta ST is at handling the lot, even getting the smallest ST up on three wheels every now and then.
It sure does look like a lot of fun, and makes us really eager for our chance to try this ourselves. Scroll down to see the hot little Ford getting busy.