2003 Ford Excursion Eddie Bauer Sport Utility 4-door 6.0l on 2040-cars

Auto blog

Ford announces four recalls, 1.4M vehicles affected

Ford is taking a bit of the spotlight away from General Motors, announcing a major group of recall campaigns, covering a total of 1.4 million vehicles built between 2006 and 2013.
Let's start with the big one, which covers the Ford Escape, Mercury Mariner and, according to The Detroit News, Ford-built Mazda Tribute CUVs. 915,216 vehicles are covered, all of which were built in model years 2008 to 2011. 736,000 vehicles are in the US, while Canada then Mexico make up the vast majority of the remainder. The problem is due to an issue with the torque sensor in the steering column, which could lead to sudden power steering failure. Manual steering would still be available, though.
"Dealers will perform one of three service fixes, depending upon what diagnostic codes are shown when the vehicle is taken to the dealer," Ford spokeswoman Kelli Felker wrote to Autoblog in an email. "They will either update software for the power steering control module and the instrument cluster module; replace the torque sensor; or replace the steering column, which includes upgraded power steering control module software."

Ford F-150 Raptor gets EcoBoost V6, new chassis and aluminum body [w/videos]

The Autoblog staff universally loves the Ford F-150 SVT Raptor, and the truck's about to get even better. Coming in the fall of 2016 (we'd assume as a 2017 model), the next off-road-ready pickup from Ford will boast an all-new, purpose-built, high-strength steel frame and a lightweight aluminum body that saves more than 500 pounds when compared to the current Raptor. It's six inches wider overall than the regular 2015 F-150, which both makes it look awfully mean but also aids in stability when driving fast off the road, and new LED lighting elements make it stand out when the sun goes dim. Under the Raptor's muscular hood will be a 3.5-liter EcoBoost V6 engine that will make more than the current 6.2-liter V8's 411 horsepower and 434 pound-feet of torque, though we don't have exact power figures for the next-gen Raptor quite yet. Also new will be a 10-speed automatic transmission, which will replace the current six-speed unit and ought to provide appropriate ratios for both rock crawling and high-speed desert trail running. Speaking of high-speed running, what makes the Raptor tick, perhaps more than any other single component, are its custom-designed suspension bits. Redesigned, larger Fox Racing Shocks with more suspension travel and all-new terrain management technology, combined with BFGoodrich All-Terrain KO2 tires, are the bits and pieces that allow for Baja-style off-roading. View 14 Photos The four-wheel-drive system in the next-gen Raptor will include a Terrain Management with settings for Normal driving, Street driving, Weather mode (for rain, snow or ice), Mud and Sand, Baja mode and Rock mode. According to Ford, the Raptor's new transfer case is designed to work as both a locking unit for crawling and a full-time unit for other off-road applications. A Torsen front differential will be optional. Basically, if all of this new stuff turns out to be as good in practice as it sounds in a press release, the next F-150 Raptor will only serve to separate Ford's off-road pickup even further from its half-hearted competitors. Feel free to watch the video and read more down below.

Ford to build next F-150, outgoing model concurrently?

Ford is rumored to be considering concurrent production for old and new F-150 models in a bid to minimize supply chain disruptions and inventory. Automotive News is reporting that the Blue Oval will build both the current F-150 and its replacement, which we showed you testing just last month, side by side for about half a year before switching over entirely to next-generation production.
As IHS Automotive analyst Mike Jackson told AN, "In order to ramp up, you have to retool...and that means you have to take capacity offline." Building both models alongside could allow Ford to cope with the still strong demand for the current F-150, while populating dealer supplies and working out supply chain kinks for the new model before making a full-time switch.
A loss of capacity when demand is so strong, even for a short period, could spell bad news for Ford, which nets an estimated 90 percent of its global profit on pickups and large SUVs. As AN states, Ford produces the F-150 in both Kansas City, Missouri and Dearborn, Michigan, which allows it to maintain some degree of flexibility in production. The new F-150 is expected to arrive at the 2014 North American International Auto Show as a 2015 model, with a design inspired by the Atlas Concept first shown at the Detroit Auto Show last January.