2013 Escape Sel Suv 2.0l Cd Turbocharged Fwd Power Steering Abs Rear Spoiler on 2040-cars

Auto blog

Ford recalling 450,000 Fusion, Mercury Milan sedans

Ford has announced a pair of recalls, and both are critical safety issues. The exponentially larger of the two recall campaigns affects over 450,000 Ford Fusion and Mercury Milan sedans manufactured at the Hermosillo plant between July 21, 2008, and March 4, 2011. The canister purge valve in the fuel tank could malfunction and could cause the top of the tank to crack and leak fuel. That could cause a fire, although Ford "is not aware of any accidents, injuries or fires" resulting from the issue. Affected vehicles will have their ECU software updated and their fuel tanks inspected for potential replacement. The company estimates there are 411,205 affected units in the United States (and its federalized territories), plus another 33,605 in Canada, and 7,055 in Mexico. The second recall affects 13 F-650 trucks. The column shifter's park position mechanism may fracture and let the truck roll away unexpectedly. Those 2016 models built in Ohio between July 29 and September 3, 2015 are all located in the US. Fixing the problem will require replacing the steering column and reconfiguring the instrument panel. FORD ISSUES TWO SAFETY RECALLS IN NORTH AMERICA DEARBORN, Mich., Nov. 23, 2015 – Ford Motor Company is issuing two safety recalls in North America. Ford is not aware of any accidents, injuries or fires related to these conditions. Details are as follows: Ford issues safety recall for certain 2010-2011 Ford Fusion and Mercury Milan vehicles in North America for potential fuel tank issue Ford Motor Company is issuing a safety recall for approximately 450,000 2010-2011 Ford Fusion and Mercury Milan vehicles for a potential issue with the fuel tank. Some of these vehicles might have a canister purge valve that does not work properly, causing internal pressure changes inside the fuel tank. Repeated pressure changes inside the tank could result in a crack on the top of the tank, possibly allowing fuel to leak. A fuel leak in the presence of an ignition source can lead to a fire. Ford is not aware of any accidents, injuries or fires related to this condition. Affected vehicles include certain 2010-2011 Ford Fusion and Mercury Milan vehicles built at Hermosillo Assembly Plant from July 21, 2008 through March 4, 2011. There are a total of approximately 451,865 vehicles that might be affected in North America, including 411,205 vehicles in the United States and federalized territories, 33,605 in Canada and 7,055 in Mexico.

Ford Mustang Mach-E fails Sweden's moose test

The infamous moose test has claimed another casualty. This time it's the Ford Mustang Mach-E AWD Long Range, which was tested in an electric four-way alongside the Tesla Model Y, Hyundai Ioniq 5 and Skoda Enyaq iV (an electric utility vehicle closely related to the Volkswagen ID.4 that is sold in the United States). According to the Swedish testers at Teknikens Varld, Ford's electric car not only failed to hit the speed necessary for a passing grade, it didn't perform well at slower speeds, either. To pass the outlet's moose test, a car has to complete a rapid left-right-straight S-shaped pattern marked by cones at a speed of at least 72 km/h (44.7 miles per hour). The test is designed to mimic the type of avoidance maneuver a driver would have to take in order to avoid hitting something that wandered into the road, which in Sweden may be a moose but could just as easily be a deer or some other member of the animal kingdom elsewhere in the world, or possibly a child or car backing into the motorway. Not only is the maneuver very aggressive, it's also performed with weights belted into each seat and more weight added to the cargo area to hit the vehicle's maximum allowable carrying capacity. The Mustang Mach-E only managed to complete the moose test at 68 km/h (42.3 mph), well below the passing-grade threshold. Even at much lower speeds, Teknikens Varld says the Mach-E (which boasts the highest carrying capacity and was therefore loaded with more weight than the rest of the vehicles tested in this quartet) is "too soft in the chassis" and suffers from "too slow steering." Proving that it is indeed possible to pass the test, the Hyundai and Skoda completed the maneuver at the 44.7-mph figure required for a passing grade and the Tesla did it at 46.6 mph, albeit with less weight in the cargo area. It's not clear whether other versions of the Mustang Mach-E would pass the test. It's also unknown if Ford will make any changes to its chassis tuning or electronic stability control software, as some other automakers have done after a poor performance from Teknikens Varld, to improve its performance in the moose test. Related video:

Plug In 2014: ALTe ready to join Ford's EQVM to convert, sell F-150 PHEV [w/video]

It's been a while since we've checked in with ALTe and its plans to convert big work vehicles like the Ford F-150 into plug-in hybrids. So, when we saw a demonstration vehicle sitting outside the San Jose Convention Center at the Plug In 2014 Conference last week, we had to get a closer look. When we did, we realized that it's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. It's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. The reason for the well-worn F-150 with 30,000 miles on it is that ALTe has been showing off its extended-range EV technology to lots of people all around the country, and Kyle Maki has been the man on the scene more often than not. "This one, I've taken all over the country," he told AutoblogGreen. "I've wore out that seat, I think. The only reason this one wasn't driven here was because we were in Charlotte [NC] last week and I didn't want to take a chance and not make it in time for this event." In other words, ALTe is out there, ginning up excitement for the idea of a plug-in hybrid Ford with an electric range of up to 40 miles and which can then continue on gas for another 360 miles at around about 25 miles per gallon. ALTe wants to not only convert new vehicles but it also offers retrofits for fleets that are happy with their current fleet. The company offers converted versions of the Ford E350 and E450 utility vehicles now but the near-mythical F-150 PHEV is still "coming soon." Yes, orders are now being accepted, but you will be forgiven if you think this is all happening on a slow time scale. There are simply a lot of things to do before ALTe can sell the truck. ALTe is currently attempting to join Ford's EQVM program, which is the electric version of the standard Qualified Vehicle Modifiers program. The QVM program requires coachbuilders to "be successfully evaluated by Ford Motor Company on criteria such as engineering, the manufacturing process, quality control, and adherence to Ford and Lincoln Divisions guidelines." Qualified applicants must also meet all applicable Federal Motor Vehicle Safety Standards, conform to Ford/Lincoln conversion guidelines and agree to be inspected annually as well as have a "commitment to continuous improvement." Maki has a simpler explanation. "It basically means you're a preferred supplier, a Tier 1, if you will," he said.