2013 Se Fwd Medium Stone Cloth Sync Voice 17s Aluminum Lifetime Warranty on 2040-cars

Auto blog

Rare Ford Mustang ASC McLaren is a piece of '80s history

You can't blame the dealer for advertising this oddball convertible as a "Ford Mustang McLaren." The name certainly rolls off the tongue better than "Ford Mustang ASC McLaren," and it makes the car sound a whole lot more appealing. However, without the 'ASC' in there, you don't get the full picture. And when it comes to the world of strange automotive collaborations—particularly those of the 80s—you most definitely want the full picture. ASC McLaren Mustangs were the result of fortuitous timing, and a project that was already underway between the American Sunroof Company and McLaren (no, not that McLaren). Detroit custom car builder Peter Muscat brought the idea of a Mustang with a tonneau cover to ASC after chopping the top off a Fox body on his own, and in turn ASC founder Heinz Pretcher brought the concept to Ford. Big blue was already in the midst of relaunching a Mustang convertible, which had been absent from the lineup for 10 years, so initially it was the Mercury Capri that got the ASC/McLaren treatment. The result was a car that was more expensive than a Mustang GT, and coupled with declining sales of the Capri overall, the car was discontinued in 1986, paving the way for the ASC McLaren Mustang you see here on eBay. With the change over to the Mustang as their platform for modification in 1987, ASC McLaren were given the opportunity to create something notable. Customizing the Capri was one thing, but the Mustang name carries with it iconic status. So what did ASC McLaren do with their chance to leave their mark on automotive history? They gave the car some visual modifications, both inside and out, but like the Capri, left the powertrain untouched. Also like the Capri, the cars still ended up costing more than $20,000. Between the high price, the economic woes of the late 80s, and disputes between Muscat and Pretcher, the ASC McLaren Mustangs were no more by 1990. During the three year run, 1,806 ASC McLaren conversions were completed, making them quite rare, especially low mileage examples like this one. The 5.0 V8s are known for being stout engines, capable of handling serious modification, and logging lots of miles, so there are no concerns there. The 5-speed Borg-Warner transmission that came in all Mustang GTs is also known for being a durable unit, the '87-'90 versions especially so. The main concern here would be the life the car has lived, and more importantly where it has lived.

How Ford switched gears for the all-new F-150

Editor's Note: This story is authored by Julia Halewicz, a senior editor with AOL's Custom Solutions Group. She holds a Masters in Journalism from NYU and has spent her career as an editor of various newspapers, magazines and digital outlets. Last year on the Friday before Labor Day, the 2014 Ford F-150 pickup truck came off the Dearborn assembly line for the last time. After the last seam was welded, the F-150 that had been so beloved by American consumers would begin the transition from traditional steel manufacturing to an aluminum body, and the second phase of Ford's 2007 blueprint for sustainability would begin. Jobs would be created, and Ford would deliver a stronger product to its consumers. It was a moment Ford would call the biggest in the company's 111-year history. Breaking The Mold For some, the change was almost unfathomable. How could a truck be made with aluminum, and why change what clearly was working very well for the company? "We have a saying at Ford that leaders lead," said Doug Scott, the company's truck group marketing manager. "This was an ideal product to make with aluminum-alloy, because lightweighting made so much sense for a truck, because the extent to which you could take weight out of a truck, you could add more value to the customer in terms of more towing, more payload, more durability, more efficiency – so again all this required us to be out in front further out in front that we normally would be to make sure that we would deliver on all those expectations." Ford began the planning process about five years before the first aluminum F-150 would come to market. The company had a lot of questions. What was customer acceptance of aluminum, could they build the truck, and could the truck be repaired out in the field? Finally, Ford needed to determine if there were enough materials available to support the demand for the F-Series. Aluminum vehicles aren't unusual, but had never been built on the scale of the F-150 – approximately one every minute. Ford created two prototypes to determine if the product would meet and exceed consumer expectations. Any change to the vehicle had to be justified in performance, safety and economy. An aluminum truck needed to be safer, lighter, have increased payload, haul more, and have improved fuel efficiency. After driving the prototypes, Ford knew it was ready to move forward. Once the aluminum truck was ready to build, the next challenge was quickly transforming the plant.

Ford extends shutdown, Stellantis confirms layoffs due to chip shortage

Ford and Stellantis this week announced new production cuts due to the global semiconductor shortage, with popular models including the Ford F-150 and Jeep Grand Cherokee facing cuts. Stellantis plans to temporarily lay off workers at one facility as production is curtailed.  According to Automotive News, Ford is extending shutdowns at some of its North American facilities into May. The Blue Oval has been forced to reduce or idle production of both its redesigned F-150 pickup and the popular Explorer due to the chip shortage. The Mustang, Transit, Edge, Lincoln Nautilus and Aviator will also continue to be affected. Stellantis is planning to temporarily lay off workers at a Jeep plant in Detroit during April and May due to a shortage of semiconductor chips. The company will cut two work crews at its Jefferson North plant in Detroit for three weeks starting April 26, then call them back and lay off a third crew from May 17 through the week of May 31, according to a schedule obtained by Bloomberg News. The plant on Detroit’s east side normally operates two shifts with three work crews six days a week to keep it running 20 hours a day. “Stellantis continues to work closely with our suppliers to mitigate the manufacturing impacts caused by the various supply chain issues facing our industry,” company spokeswoman Jodi Tinson said in a statement. “Due to the unprecedented global microchip shortage, Jefferson North will adjust its production schedule through the end of May.” Jefferson North employs about 4,800 hourly workers and makes the Jeep Grand Cherokee, the top-selling Jeep model last year, and the Dodge Durango SUV. A redesigned version of the Grand Cherokee is scheduled to start production in August, according to researcher AutoForecast Solutions. This article contains reporting from Bloomberg. Plants/Manufacturing Ford Jeep Lincoln Technology chip shortage