2009 Ford Edge Sport on 2040-cars

Auto blog

Honda poised for growth, Detroit to hold steady, Car Wars study says

The automotive industry is expected to keep booming in the US over the next several years, but the train might start running out of steam in the long term, according to 2015's Car Wars report from Bank of America Merrill Lynch analyst John Murphy. The forecast focuses on changes between the 2016 and 2019 model years, and the latest trends appear similar in some cases to the past predictions. Sales are expected to keep growing and reach a peak of 20 million in 2018, according to the Detroit Free Press. The expansion is projected to come from a quick pace of vehicle launches, with an average of 48 introductions a year – 26 percent more than in 1996. Crossovers are expected to make up a third of these, maintaining their strong popularity. However, Murphy predicts a decline, as well. By 2025, total sales could fall to around 15 million units. As of May 2015, the seasonally adjusted annual rate for this year stands at 17.71 million. Like last year, Honda is predicted to be a big winner in the future thanks to products like the next-gen Civic. "Honda should be the biggest market share gainer," Murphy said when presenting the report, according to Free Press. Meanwhile, in a situation similar to Car Wars from 2012, a lack of many new vehicles is expected to cause a drop for Hyundai, Kia, and Nissan. Based on this forecast, Ford, General Motors, and FCA US will all generally maintain market share for the coming years. The report does make some future product predictions, though. The next Chevrolet Silverado and GMC Sierra might come in 2019, which is earlier than expected. Also, Lincoln could get a Mustang-based coupe for 2017, a compact sedan for 2018 and an Explorer-based model in 2019, according to the Free Press. Related Video: News Source: The Detroit Free PressImage Credit: Nam Y. Huh / AP Photo Earnings/Financials Chrysler Fiat Ford GM Honda Lincoln Car Buying fca us

1964 Ford GT40 prototype to be auctioned in April

The Ford GT40 owns a firm spot on the list of the greatest American racecars ever made, being the first car from the United States to take an overall win in the 24 Hours of Le Mans. And now Mecum will auction what it claims is second-oldest GT40 still in existence at its Houston sale on April 12.
The story of the GT40 is fascinating. Henry Ford II attempted to buy Ferrari in the early '60s, but Enzo refused. Ford decided if he couldn't have them, then he would beat the Prancing Horse on the track. Ford went to Carroll Shelby and asked him to spearhead the program. The early cars combined a steel monocoque chassis with Ford's 4.2-liter V8 engine pumping out around 350 horsepower. The first prototype made its public debuted on April 1, 1964, at the New York Auto Show.
Shelby kept building prototypes, including GT/104, which is for sale here. This version featured a lighter steel chassis and was raced at Le Mans in 1964. However, a fire forced it to retire. It was then repainted and had a 4.7-liter (289-cubic-inch) engine fitted. The chassis had its best finish at the 1965 Daytona Continental 2,000 Kilometers where it finished third with Bob Bondurant and Ritchie Ginther behind the wheel. Later that season, it was shipped back to Ford where it was restored and displayed at auto shows until 1971 when the automaker sold it. Since then, it has had many private owners.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.