2012 Ford E-150 Cargo Van Partition Cruise Control 11k Texas Direct Auto on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

2015 Ford Mustang 50th Anniversary Edition says 'happy birthday' in New York

Fifty years ago this week, Ford debuted the first-ever Mustang at the New York World's Fair. And to celebrate, the Blue Oval is offering up this special, 50th Anniversary Edition 2015 Mustang, which makes its debut at the New York Auto Show. It'll be a seriously limited affair, with only 1,964 examples of the special edition Mustang slated to be produced (the number chosen to coincide with the 'Stang's first year in production). But for those who raise their hands for the 50th Anniversary package, there's a pretty sweet package in store.
The 50th Anniversary Edition is based on the 2015 Mustang GT with the Performance Pack, and is only available in two colors: Kona Blue, or Wimbledon White (pictured). The car also comes fully loaded - the only option for buyers to choose is the transmission. Should you opt for the six-speed automatic, you'll get a limited-slip rear differential with a 3.55:1 final-drive ratio (the 50th Anniversary car is also the only way to get a slushbox-equipped 'Stang with the Performance Pack). Selecting the six-speed manual 'box will net you a Torsen differential with a 3.73:1 ratio. All 50th Anniversary cars will be powered by Ford's 5.0-liter, naturally aspirated V8, estimated to produce more than 420 horsepower and 390 pound-feet of torque in the 2015 Mustang.
Inside, there's a cashmere-stitched, leather-wrapped steering wheel, with a similar detail found on the instrument panel, shift boot, door inserts, seats, and center armrest. Two-tone leather/black upholstery is also part of the 50th Anniversary package, and of course, there's a special logo on the seats.

Ford Explorer problems gutted third-quarter sales

In early September, the Detroit Free Press published a feature noting numerous problems Ford's having with the 2020 Explorer and 2020 Lincoln Aviator launches. Issues with both SUVs, built at Ford's Chicago Assembly Plant, were so rife and dire that the automaker was trucking the vehicles 275 miles away to Michigan for repairs. Bloomberg reported earlier this month that Explorer's third-quarter sales dropped 48 percent compared to the previous model in 2018, with dealers unable to get enough units on lots for customers. Nor is the snafu over: Automotive News reports that another "batch of about 2,500 Explorers in need of repairs" arrived recently in Michigan, and sales through the first nine months of 2019 are down 31 percent. Sales dips during model changeovers are to be expected as old inventory gets sold down and new production ramps up, but this is different. Ford U.S. sales boss Mark LaNeve told Bloomberg earlier this month, "We’ve got adequate inventory in our stores. For Q4, availability wonÂ’t be an issue. WeÂ’ll be able to hit our stride with Explorer starting now." It's hard to know whether that's true, with thousands of Explorers still piling into Michigan; the batch AN mentioned represents about 5 days of sales during an average month in 2018, before the drawdown and interruptions hampered matters. And when Consumer Reports tested the Ford Explorer it bought this summer, it titled the review, "2020 Ford Explorer drives nicely but has many flaws / Poor interior quality and a high price overshadow the SUV's improvements."   On top of that, the AN piece mentions a new impediment to uncorking the Explorer sales stream: Worker strife in the Chicago plant. Allegedly, "Roving groups of workers are intimidating other employees, creating a hostile environment, the people said. ThatÂ’s driving up turnover and leaving some vehicle assembly unfinished, contributing to the company having to complete the work at the Michigan factory or at dealerships, the people said." Ford's been fined twice before for the same kinds of issues at its plants, once in 1999, again in 2017, but a spokesperson said Ford isn't aware of any such problems now. The pressure otherwise has got to be unpleasant for everyone on the Explorer team, from CEO Jim Hackett down. The automaker was meant to be "turning the corner" in April, but as of now, shares are down, credit rating is down, earnings are down.