2006 Ford E-350 Super Duty Base Cutaway Van 2-door 5.4l on 2040-cars

Auto blog

Ford recalls 83k Taurus and crossover models for halfshaft issue

Ford and the National Highway Traffic Safety Administration have issued a recall for some 83,250 vehicles in the US, for an issue with halfshafts. More specifically a "halfshaft retention circlip" might not have been properly installed on affected vehicles, with the result being halfshafts that may move improperly or disengage completely from the linkshaft while driving. The NHTSA release also notes that the issue may occur "without prior warning" which obviously factors in to the timeliness of getting this checked.
Should the halfshaft disengage, a few troubling things could happen. If it occurs while driving, power from the engine will no longer be transmitted to the wheels. And, if the vehicle is parked without the parking brake applied after disengagement of the circlip, vehicles may roll away even if they're transmissions have been placed in "Park."
Affected vehicles are as follows: Ford Edge and Lincoln MKX crossovers from model years 2012 to 2014; Ford Taurus and Lincoln MKS sedans from model years 2013 to 2014; Ford Flex and Lincoln MKT vehicles from model years 2013 to 2014.

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.

Ford Shelby GT350 Mustang is a lean, mean, Z/28-fighting machine [w/video]

If there's one thing you can count on, it's that the renewed rivalry between the Ford Mustang and Chevrolet Camaro will never, ever cease. For every version of Ford's pony car, there's an equally potent Chevrolet. And so with the debut of the Camaro Z/28 earlier this year, Ford has responded with a track-focused 'Stang of its own, resurrecting the Shelby GT350 name.
It looks to be a fine piece of work, this Mustang, with power coming from a naturally aspirated 5.2-liter V8 that will produce "more than 500 horsepower" and "above 400" pound-feet of torque. That grunt runs to the rear wheels via a six-speed manual transmission, and a Torsen limited-slip differential keeps everything in line.
But that's hardly the most impressive piece of the GT350 puzzle. Ford has increased the Mustang GT's chassis stiffness for duty here in the Shelby, and the coupe employs MagneRide damping which automatically adjusts based on road conditions and driver inputs. It's a first both for the Blue Oval and for the segment. And speaking of firsts, the GT350 uses a flat-plane crankshaft - something Ford has never included in a production V8 before.