2000 Ford Econoline E-250 Van on 2040-cars

Auto blog

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

2016 Ford Police Interceptor Utility shows up for duty in Chicago

The latest upgrade for the 2016 Ford Police Interceptor Utility is all set to patrol the Windy City's streets with its debut at the 2015 Chicago Auto Show. On the outside, the revised Ford police vehicle looks basically the same as the recently refreshed Explorer with a new grille and redesigned headlights. Inside, there's a restyled steering wheel and center console. Unlike the civilian model, though, the PI Utility gets heavy-duty brakes, a more robust cooling system, reinforced subframe mounts and larger diameter suspension springs for more strength. Under the hood, police forces get to choose between either a 3.7-liter V6 with 304 horsepower and 279 pound-feet of torque or a 3.5-liter EcoBoost V6 with 365 hp and 350 lb-ft of twist. Regardless of powertrain, these 'utes feature a six-speed automatic transmission and all-wheel drive. The transmission includes the awesome-sounding Pursuit Mode feature that switches over to more aggressive shifts when it detects harder driving to properly stop crime. Related Video:

Detroit Three automakers and UAW will continue to require masks

GM CEO Mary Barra at a Warren, Mich., training center in September. (Reuters)   WASHINGTON — Detroit's Big Three automakers and the United Auto Workers (UAW) union said on Wednesday that workers will continue to be required to wear masks in workplaces. The joint statement from the UAW and General Motors, Ford and Chrysler-parent Stellantis NV said it was continuing the requirements "out of an abundance of caution." The U.S. Centers for Disease Control and Prevention (CDC) said in May that fully vaccinated people do not need to wear masks in most instances, including at work. The UAW and the automakers said temperature screening upon entering facilities is expected to be phased out. The UAW and automakers continue to recommend autoworkers get vaccinated. Many U.S. employers are still requiring vaccinated workers to wear masks in workplaces. Volkswagen AG's U.S. unit said it will "no longer require masks for fully vaccinated employees after June 21, and will continue to follow CDC guidelines." Toyota is among the automakers that has ended temperature checks and entry questionnaires at U.S. plants but it is continuing to require facial coverings. Honda and Nissan said they had made no changes to their U.S. employee COVID-19 requirements.   Plants/Manufacturing Chrysler Dodge Ford GM Jeep RAM Safety coronavirus