1966 Ford Econoline Street Rod -cruiser V8 Auto. on 2040-cars

Auto blog

Ford wins second consecutive Engine of the Year with 1.0L EcoBoost [UPDATE]

For the second year in a row, Ford has taken top honors in International Engine of the Year voting. As was the case last year, it is Ford's 1.0-liter EcoBoost engine that earns the automaker the accolade, achieving the highest-ever accumulated score in the 15 years that the award has been handed out.
A panel of 87 automotive journalists from 35 countries are responsible for choosing the world's best engines, and this is only the third time an automaker has managed back-to-back victories. Voters were impressed by the "Baby EcoBoost" engine's power output - 123 horsepower between 1,400 and 4,500 rpm, 148 pound-feet of torque from 1,400 to 4,000 rpm - and its compact size; Ford has demonstrated that the package is small enough to fit in the overhead bin of a passenger airplane.
Currently, the 1.0-liter EcoBoost is offered in the European Fiesta, B-MAX, Focus, C-MAX and Grand C-MAX, and Ford plans to put the engine in the Transit Connect, Transit Courier, Tourneo Connect, Tourneo Courier, Mondeo and EcoSport in short order. In North America, the Fiesta will be the first vehicle to offer the 1.0L EcoBoost later this year.

Ford's new Focus RS hatches hot and heads for America

The hot hatch market is heating up, and heating up fast. What you see here is Ford's new challenger for pocket-rocket supremacy, the third iteration of the breed and the 30th model to wear the Rallye Sport designation. But perhaps best of all, it will be the first time Ford will offer a new Focus RS in America. Following yesterday's leak, the latest Ford Focus RS is now ready to step out into the light and light up its tires. Answering the call is the same 2.3-liter EcoBoost turbo four as you'd find in the new Mustang, but upgraded with a new low-inertia twin-scroll turbocharger, larger compressor and intercooler, freer-flowing intake, large-bore dual-pipe exhaust with electronically controlled valve and upgraded internal components. The result is a 6,500-rpm redline (closer to that of Ford's atmospheric performance engines) and an output quoted as "well in excess of 315 horsepower" – which is already 5 more than the EcoBoost Mustang and a good 63 more than the existing Focus ST. Power is transmitted to the tarmac through a new performance-focused all-wheel drive system with torque vectoring that can send as much as 70 percent of available twist to the rear wheels (and as much as 100 percent between them). The system works in tandem with the brake-based torque vectoring system and stability control, and will even divert torque to the outside rear wheel under cornering to keep it flat and under control while reducing understeer. Those still suspicious of dual-clutch gearboxes will also be pleased to read that Ford has stuck with a conventional six-speed manual. We'll reserve judgement on the inclusion of the electric power steering until we get a chance to drive it, though. Of course the small team of global Ford Performance engineers who developed the new Focus RS – and the Gymkhana legend Ken Block who consulted on the project – didn't just tinker with the powertrain and leave it at that. The suspension features stiffer spring rates, bushings and anti-roll bars than the Focus ST, augmented by two-mode switchable dampers. 19-inch alloys wear Michelin Pilot Super Sport rubber, with optional Pilot Sport Cup 2 semi-slicks for track-day enthusiasts. Ford has yet to detail the brakes on its new hot hatch, but you can bet they've been upgraded as well.

Project Ugly Horse: Part VI

Solid axle? What solid axle?
I was fully prepared to embark on a seven-day journey down a rabbit hole of broken bolts, internet hearsay and consternation.
This should not have gone this easily. Having a long and checkered history of simple projects punctuated by much wailing and gnashing of knuckles, I was fully prepared to embark on a seven-day journey down a rabbit hole of broken bolts, internet hearsay and consternation when I finally decided to lay hands on the '89 Mustang with the goal of relieving the car of its stock rear axle. Instead, it took less than a full morning's worth of work to carve the old 7.5-inch solid axle from its moorings and mock up something, well, different.