Up for sale is a used Crown Victoria Police Interceptor. It has 93925 100% great tires, new brakes all around. No oil leaks and paint damage anywhere. The car is currently a marked patrol car and in white so it would be great for a security company who may need another vehicle. It has the full police interceptor package as well as some additional goodies.
1. Setina Go Rhino Pushbar (white)
2. Full lighting package, vehicle has one main lightbar a federal signal Smart Vector lightbar, it has SHO ME corner strobes all around as well as a white flasher unit in the reverse lights. Vector bar has custom filters that were made by company and cannot be bought anywhere else.
3. Vehicle has a dual gun rack for a shotgun and AR-15. The rack is operated by a timer switch on the main control panel.
4. The vehicle has full prisoner transport system. Setina Prisoner Cage is installed between the front and back seats, as well as Setina window guards on both rear windows. The rear seats are plastic with the P71 style rear seat belts in place as well.
5. The driver has access to a digital trunking police/fire scanner currently set up with bay area frequencies. (can program for no cost if needed) Scanner is wired to a large antenna on the roof.
6. The driver also has access to the trunking in car mobile radio which is mounted correctly with an antenna on the roof.
7. The vehicle also sports a custom computer mount system with included windows 7 Panasonic Toughbook. This is powered by an invertor which is below the passenger seat.
8. Car was just repainted and decaled 3 months ago so it will be easy to redecal for your company.
9. Car was just in for service and has no issues at all. Car passes smog like a champ as well.
10. Full documentation is kept by me going all the way back to the factory release date in 2001.
11. I have a dashcam system that was not mounted that I can throw in with the car if you would like to have put in at some point.
In the end this is an amazing car which we are sad to see go, but business is not so good so we need the cash.

The car is rugid as hell and has a lot of duty left to serve, place a bid to add it to your fleet today!

Auto Services in California

Z & H Autobody And Paint ★★★★★

Automobile Body Repairing & Painting, Truck Body Repair & Painting

Address: 4738 Marine Ave, Lynwood

Phone: (310) 263-1040

Yanez RV ★★★★★

Auto Repair & Service, Used Car Dealers, Recreational Vehicles & Campers

Address: Gilman-Hot-Springs

Phone: (951) 526-9089

Yamaha Golf Cars Of Palm Spring ★★★★★

Auto Repair & Service, Golf Cars & Carts

Address: 55955 Pga Blvd, Bermuda-Dunes

Phone: (760) 564-0400

Wilma`s Collision Repair ★★★★★

Automobile Body Repairing & Painting

Address: 25571 Dollar St, Dublin

Phone: (925) 484-2324

Will`s Automotive ★★★★★

Auto Repair & Service

Address: 770 Post St, San-Pablo

Phone: (415) 776-3543

Will`s Auto Body Shop ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Truck Body Repair & Painting

Address: 2715 Geary Blvd, San-Pablo

Phone: (415) 563-8777

Auto blog

Alan Mulally talks about why Ford's Falcon had to die

Tue, 20 Aug 2013

When Ford made the decision to end production of the Falcon sedan and Territory CUV in Australia, it wasn't a popular move Down Under. The large, four-door Falcon had been in production for 50 years, and while Ford has reaffirmed its commitment to the Australian market, it's understandable that some people still aren't all that crazy about the Blue Oval's decision.
Speaking to CEO Alan Mulally after Ford's Go Further event in Sydney, Australian site Go Auto reports that the decision was not one made lightly, and that the automaker is doing everything possible to respect the Falcon and Territory's "stakeholders." It's an interesting piece that shows a softer side of a corporation, while demonstrating that Ford is doing everything in its power to make the end of production as smooth as possible for all parties.
Head over to Go Auto for the full series of remarks from Mulally, and then let us know what you think of Ford's handling of the Falcon and Territory discontinuations, in Comments.

Feds open investigation into Chevy Express, Ford Freestar rust issues

Wed, 28 Dec 2011

'Tis the season... for road salt. And with that, comes rust. And what does rust bring? Well, for Ford and General Motors, a National Highway Traffic Safety Administration investigation. According to The Detroit News, NHTSA is looking into potential recalls issues with Chevrolet Express vans and Ford Freestar minivans.
The feds have received five complaints that rust has caused leaking fuel filler pipes on 2003 Express vans. Separately, seven complaints have been filed over excessive rust in the rear wheel wells of 2004 Ford Freestar and Mercury Monterey minivans. The Freestar and Monterey went out of production in 2007. Neither issue has resulted in any crashes or injuries, according to the report.

Ringbrothers shows off Coyote-powered 1968 Mercury Cougar

Thu, Feb 25 2021

We'll openly admit that not every SEMA build is our cup of tea. But this? A tastefully resto-modded 1968 Mercury Cougar with a 460-horsepower Ford Mustang V8? Yeah, this is right in our wheelhouse. Sadly, there was no in-pwerson SEMA show in 2020, so we missed out on gems like this one. SEMA or no SEMA, the aftermarket carries on, and co-owners Jim and Mike Ring of Ringbrothers (get it?) saw no reason to let their time and effort go to waste. When they're not building wild customs (see: 1,100-horsepower 1972 AMC Javelin AMX) or more subtle showcases (such as this Cougar or their 1971 K5 Chevy Blazer build from 2018), the folks at Ringbrothers crank out factory reproduction parts, whether for old-fashioned restoration or modification purposes. While '60s muscle cars are recurring build subjects for the two, the Cougar was the first of its kind they tackled. Keeping it in the family, Ringbrothers sourced a Ford 5.0-liter "Coyote" V8 and a 10-Speed Automatic (lifted from an F-150 Raptor, incidentally) for the build. They didn't stop with the driveline, of course. The suspension was overhauled with a little help from DSE and a set of HRE Series C1 C103 Forged 3-Piece wheels were thrown over upgraded brakes. "We put our heart into each car we build, and this Cougar is no exception," Jim said. "The finished product is mild and classy, yet any enthusiast instantly knows it's not stock. I imagine this is what Mercury designers would have come up with if they were building the Cougar today." "While we couldn't bring the car to the SEMA Show, we hope it can be shown to the public soon," Mike said. "We had never done a Cougar before, so this was a fun build. I love working with new shapes and coming up with new ideas." There's plenty to appreciate about this Cougar apart from the mechanicals, too. The finish is Augusta Green Metallic (courtesy of BASF), which was a factory color in 1968. You may know it by another name: Highland Green. There are a few custom exterior touches, but they're quite subtle and styled to be period-correct. The interior was also restored and updated, and it's where you'll find the only thing we're not fond of: that big, fat truck shifter. Gearbox choices notwithstanding, it's a bit of an eyesore. But considering how gorgeous the rest is, we'll give it a pass. Related Video:

Ford Crown Vic Patrol Car on 2040-cars

Ford Crown Victoria for Sale