2006 Crown Vic P71 Police Interceptor Pkg Cruiser *palm Beach Sheriff Car* on 2040-cars

Auto blog

2015 Ford Mustang EcoBoost loses big power on 87 octane

The 2015 Ford Mustang with the 2.3-liter EcoBoost four-cylinder is a pretty potent package on paper. With 310 horsepower and 320 pound-feet of torque, it boasts better performance numbers than the 3.7-liter V6, but with better fuel economy as an added benefit. However, if you're in the market for one of these boosted 'Stangs, you should probably keep in mind that it really prefers to gulp premium, 93-octane fuel. It can drink 87-octane swill in a pinch, but you're going to find significantly less power underfoot when pulling away. While it's not shocking that the ponies are dialed back with a lower grade of gasoline, an alleged page from a Ford training manual obtained by Mustang 6G purports to show just how much power is lost, though. According to this document, the 2.3-liter EcoBoost makes 275 horsepower and 300 pound-feet of torque when running on lower octane fuel. That's a substantial reduction of about 11.3 percent compared to when the engine drinks 93 octane. Interestingly, according to Mustang 6G, that finding was a bit better than expected, because a Ford engineer reportedly said power would be down about 13 percent without altering peak torque. In speaking with Autoblog, Paul Seredynski of Ford powertrain communications, objected to part of this document. While he couldn't confirm the specific losses listed for the Mustang EcoBoost, "torque remains unchanged" with lower octane gasoline, Seredynski said. He speculated this training manual page was "possibly from before the engine was certified" and therefore showed incorrect figures. Serendynski did confirm that the automaker recommends using 93 octane, and like all modern engines, the software adapts if it's lower. "Peak power would be reduced" by using a lesser grade, he confirmed. Featured Gallery 2015 Ford Mustang EcoBoost: First Ride View 20 Photos News Source: Mustang 6GImage Credit: Copyright 2015 AOL, Ford, Mustang 6G Ford Technology Convertible Coupe Performance ecoboost ford mustang ecoboost

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.

Ford cuts F-150 fuel use through CNG-capable fleet sales, EcoBoost

The possibility of $1-a-gallon fuel would make a lot of US governmental entities sit up and take notice. The state of Oklahoma and the city of Dallas are making that happen. Those two entities are buying up a bunch of Ford F-150 pickups retrofitted to run on compressed natural gas (CNG), all in the name of cost savings and emissions reduction. Oklahoma is buying 256 of the F-150s, while Dallas is buying another 65. The trucks, which cost between $6,000 and $9,500 to retrofit (on top of the original price), can run on either CNG or liquefied petroleum gas (LPG). And while that's a substantial hit, conversion costs are typically paid back in three years thanks to lower refueling costs. CNG prices are as low as $1.07 a gallon in parts of Oklahoma. How much lower? The national average price for CNG is about a buck and a half less than the $3.67 average per-gallon cost of gasoline. And CNG prices are as low as $1.07 a gallon in parts of Oklahoma, where CNG is plentiful. CNG also cuts tailpipe greenhouse gas emissions by about 20 percent compared with gasoline, while the retrofitted trucks can go as far as 450 miles from their CNG tanks in addition to the 300-mile range from their conventional tanks. That's useful in a bit state like Texas. This week, the US Energy Department trumpeted a $5.9-billion loan program that Ford accessed to upgrade its factories for production of its EcoBoost engines, noting that Ford has sold a half-million F-150 trucks with EcoBoost engines. Those trucks have collectively cut fuel use by almost 57 million gallons of gas during the past three-plus years. Check out Ford's press release on the F-150 purchases below and the Energy Department's statement about its loan program here. OKLAHOMA, DALLAS ORDER 300-PLUS CNG-CAPABLE FORD F-150 PICKUPS AS DEMAND GROWS FOR ALTERNATIVE FUEL OPTION The state of Oklahoma and its agencies to buy 256 Ford F-150 trucks prepped to run on compressed natural gas; Dallas orders 65 for its fleet 2014 F-150 available with gaseous-fuel prep option on 3.7-liter V6 engine; can run on CNG or liquefied petroleum gas (also called propane autogas) By summer, Ford will offer eight vehicles that can run on clean-burning, affordable CNG; the company is on track to sell more than 15,000 such vehicles in 2014 The state of Oklahoma, its agencies and the city of Dallas have ordered a total of 321 Ford F-150 pickups that can run on compressed natural gas.