1978 Ford Bronco on 2040-cars

Auto blog

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

Ford Mustang GT Bi-Fuel CNG

Highly intrigued, we recently visited a Southern California Gas Company office to check out several hybrid vehicles promising something new. Unlike more commonplace gasoline-electric hybrids, we were there to evaluate innovative gasoline-compressed natural gas (CNG) hybrids - yes, they run on unleaded gasoline and compressed natural gas. According to the experts on hand, this arrangement delivers extended range and reduced emissions while chipping in with lower operating costs than pure-gasoline vehicles. There are advantages over its gasoline-electric counterparts, as well.
The program is part of a three-way collaboration between The Carlab, a Southern California-based automotive consulting firm, Landi Renzo USA, a company specializing in alternative fuel solutions, and America's Natural Gas Alliance, a group that promotes CNG. Long story short, the team has engineered a way to allow a modified internal combustion vehicle to seamlessly switch between two fuels (gasoline and CNG) with no driver intervention. In theory, and if it works as well as promised, it's a win-win for the vehicle owner and the environment.
Parked at the Gas Company office were six different gasoline-CNG hybrid vehicles. To demonstrate the technology's versatility (just about any gasoline vehicle may be modified) Carlab brought a varied assortment of bodystyles, each from a different automaker. After taking a quick glance at the half-dozen in the parking lot, we made a beeline for the performance-oriented Ford Mustang GT - a 2012 model - with the six-speed manual gearbox.